Nissan Murano. Instruction — part 746
EXT-22
< REMOVAL AND INSTALLATION >
FRONT GRILLE
4.
Remove front grille (1) fixing clips (A).
5.
Disengage fastener (A) of fixing front grille (1) with plier (B).
6.
Pull front grille (1) horizontally toward vehicle front, and then
remove front grille.
7.
Remove the front emblem after removing front grille.
• Remove emblem (1) fixing pawls.
• Remove emblem from front grille (2).
INSTALLATION
Install in the reverse order of removal.
JMKIA1977ZZ
JMKIA1978ZZ
: Pawl
JMKIA1979ZZ
: Pawl
JMKIA1980ZZ
COWL TOP
EXT-23
< REMOVAL AND INSTALLATION >
C
D
E
F
G
H
I
J
L
M
A
B
EXT
N
O
P
COWL TOP
Exploded View
INFOID:0000000009720573
Removal and Installation
INFOID:0000000009720574
REMOVAL
1.
Windshield side molding RH
2.
Cowl top seal
3.
Rubber plug RH
4.
Extension cowl top
5.
Windshield side molding LH
6.
Front wiper arm and blade LH
7.
Front wiper arm and blade RH
8.
Front wiper arm cover RH
9.
Washer nozzle RH
10. Extension cowl top
11. Rubber plug LH
12. Front wiper arm cover LH
13. Washer nozzle LH
14. Cowl top cover
15. Front wiper drive assembly
16. EPT sealer
: Always replace after every disassembly.
: N·m (kg-m, ft-lb)
JMKIA1981GB
EXT-24
< REMOVAL AND INSTALLATION >
COWL TOP
1.
Fully open hood assembly.
2.
Remove front wiper arm blade (LH/RH). Refer to
WW-134, "Removal and Installation"
3.
Remove windshield side molding (1) fixing clip (A) (LH/RH).
4.
Disconnect front washer tube connector (1).
5.
Remove cowl top cover fixing clips.
6.
Pull forward to release cowl top cover (1) from windshield glass.
CAUTION:
When performing the procedure after removing cowl top
cover, cover the lower end of windshield glass with ure-
thane etc.
7.
Remove the following parts after removing cowl top cover.
• Cowl top seal
• Washer nozzle (LH/RH)
• Washer tube
• EPT sealer
8.
Remove front wiper drive assembly. Refer to
WW-138, "Removal and Installation"
.
9.
Remove brake reservoir tank (1) fixing nuts (A).
10. Remove brake fluid level switch harness clips (B).
11. Remove extension cowl top mounting bolts, and then remove extension cowl top.
JMKIA1982ZZ
JMKIA1983ZZ
JMKIA1984ZZ
JMKIA1985ZZ
COWL TOP
EXT-25
< REMOVAL AND INSTALLATION >
C
D
E
F
G
H
I
J
L
M
A
B
EXT
N
O
P
12. Remove dash lower insulator upper mounting nuts, and then remove dash lower insulator upper.
INSTALLATION
Install in the reverse order of removal.
CAUTION:
• When installing cowl top cover, check that blind clips are securely fitted in panel holes on body, and
then press them in.
• Always replace cowl top cover EPT sealer on rear of vehicle with a new one when installing old cowl
top cover.
• After installing, perform adjustment of wiper arms. Refer to
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст