Nissan Qashqai (2007-2010). Manual — part 656
FAX-46
< PREPARATION >
[4WD]
PREPARATION
PREPARATION
PREPARATION
Special Service Tool
INFOID:0000000001080612
Tool number
Tool name
Description
KV40107300
Boot band crimping tool
Installing boot band
KV40107500
Drive shaft attachment
Removing drive shaft
KV38107900
Protector
a: 32 mm (1.26 in) dia.
Installing drive shaft
ZZA1229D
ZZA1230D
PDIA1183J
FRONT WHEEL HUB AND KNUCKLE
FAX-47
< ON-VEHICLE MAINTENANCE >
[4WD]
C
E
F
G
H
I
J
K
L
M
A
B
FAX
N
O
P
ON-VEHICLE MAINTENANCE
FRONT WHEEL HUB AND KNUCKLE
Exploded View
INFOID:0000000001080613
.
Inspection
INFOID:0000000001080614
MOUNTING INSPECTION
Make sure that the mounting conditions (looseness, backlash) of each component and component conditions
(wear, damage) are normal.
WHEEL BEARING INSPECTION
• Move wheel hub and bearing assembly in the axial direction by hand. Make sure there is no looseness of
wheel bearing.
• Rotate wheel hub and make sure there is no unusual noise or other irregular conditions. If there is any of
irregular conditions, replace wheel hub and bearing assembly.
Standard
Axial end play
: Refer to
FAX-48
< ON-VEHICLE MAINTENANCE >
[4WD]
FRONT DRIVE SHAFT
FRONT DRIVE SHAFT
Inspection
INFOID:0000000001110135
• Check drive shaft mounting point and joint for looseness and other damage.
• Check boot for cracks and other damage.
CAUTION:
Replace entire drive shaft assembly when noise or vibration occur from drive shaft.
FRONT WHEEL HUB AND KNUCKLE
FAX-49
< ON-VEHICLE REPAIR >
[4WD]
C
E
F
G
H
I
J
K
L
M
A
B
FAX
N
O
P
ON-VEHICLE REPAIR
FRONT WHEEL HUB AND KNUCKLE
Exploded View
INFOID:0000000001080616
Removal and Installation
INFOID:0000000001080660
REMOVAL
Wheel Hub and Bearing Assembly
1.
Remove tires from vehicle.
2.
Remove wheel sensor from steering knuckle. Refer to
BRC-67, "FRONT WHEEL SENSOR : Exploded
(with ABS),
BRC-172, "FRONT WHEEL SENSOR : Exploded View"
(with ESP).
CAUTION:
Never pull on wheel sensor harness.
3.
Remove lock plate from strut assembly. Refer to
BR-19, "FRONT BRAKE (WITH ABS) : Exploded View"
(LHD with ABS),
BR-63, "FRONT BRAKE (WITH ABS) : Exploded View"
"FRONT BRAKE (WITH ABS) : Exploded View"
BR-65, "FRONT BRAKE (WITH ESP) :
(RHD with ESP).
4.
Remove torque member mounting bolts. Hang torque member not to interfere with work. Refer to
"BRAKE CALIPER ASSEMBLY : Exploded View"
(LHD),
BR-81, "BRAKE CALIPER ASSEMBLY :
(RHD).
CAUTION:
Never depress brake pedal while brake caliper is removed.
5.
Remove disc rotor.
6.
Remove cotter pin, and then loosen hub lock nut.
1.
Steering knuckle
2.
Splash guard
3.
Wheel hub and bearing assembly
4.
Cotter pin
Refer to
JPDIF0036GB
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст