Nissan Qashqai (2007-2010). Manual — part 1193
REAR DOOR
DLK-851
< ON-VEHICLE REPAIR >
[WITHOUT I-KEY, WITH SUPER LOCK]
C
D
E
F
G
H
I
J
L
M
A
B
DLK
N
O
P
DOOR CHECK LINK : Removal and Installation
INFOID:0000000001098762
REMOVAL
1.
Remove the rear door finisher. Refer to
INT-10, "FRONT DOOR FINISHER : Removal and Installation"
2.
Remove the rear door sealing screen.
3.
Remove the mounting bolts of the check link on the vehicle.
4.
Remove the door check link cover, and then remove the door check link mounting bolts.
5.
Remove the door check link.
INSTALLATION
Install in the reverse order of removal.
CAUTION:
Check front door open/close operation after installation.
1.
Door check link
2.
Door hinge (upper)
3.
Door hinge (lower)
4.
Bumper rubber
5.
Rear door panel
6.
Door striker
Refer to
JMKIA0180ZZ
PIIB6543E
DLK-852
< ON-VEHICLE REPAIR >
[WITHOUT I-KEY, WITH SUPER LOCK]
BACK DOOR
BACK DOOR
BACK DOOR ASSEMBLY
BACK DOOR ASSEMBLY : Exploded View
INFOID:0000000001098767
REMOVAL
ADJUSTMENT
1.
Back door hinge
2.
Back door assembly
3.
Back door lock assembly
4.
Bumper rubber bracket
5.
Back door stay bracket (lower)
6.
Bumper rubber
7.
Back door stay
8.
Back door stay bracket (upper)
9.
Back door striker
Refer to
for symbols in the figure.
JMKIA0186ZZ
BACK DOOR
DLK-853
< ON-VEHICLE REPAIR >
[WITHOUT I-KEY, WITH SUPER LOCK]
C
D
E
F
G
H
I
J
L
M
A
B
DLK
N
O
P
BACK DOOR ASSEMBLY : Removal and Installation
INFOID:0000000001098768
REMOVAL
1.
Remove the back door finisher inner. Refer to
INT-26, "Removal and Installation"
2.
Remove the back door window glass. Refer to
GW-17, "Removal and Installation"
NOTE:
1.
Back door hinge
2.
Back door striker
3.
Roof panel
4.
Back door outer
5.
Back door glass
6.
Body side outer
7.
Rear bumper fascia
Refer to
JMKIA0194ZZ
DLK-854
< ON-VEHICLE REPAIR >
[WITHOUT I-KEY, WITH SUPER LOCK]
BACK DOOR
It is necessary to remove back door window glass in order to remove harness, because harness connec-
tor interferes with back door window glass pin.
3.
Disconnect the connectors in the back door, and then remove the grommet, and pull out hte harness.
4.
Remove the parcel shelf. Refer to
INT-24, "Removal and Installation"
5.
Remove the high-mounted stop lamp. Refer to
EXL-183, "Removal and Installation"
.
6.
Remove the grommet (1), and then pull out the washer tube (2) .
7.
Pull the harness out of the back door.
8.
Support the back door lock with the proper material to prevent it
from falling.
9.
Remove the back door stay bracket mounting bolts (A) on the
back door.
10. Remove the back door hinge mounting nuts (A) on the back
door and remove the back door assembly.
CAUTION:
Perform work with 2 workers, because of its heavy weight.
INSTALLATION
Install in the reverse order of removal.
CAUTION:
• Perform work with 2 workers, because of its heavy weight.
JMKIA0190ZZ
A
: Jack
B
: Shop cloth
JMKIA0191ZZ
JMKIA0192ZZ
JMKIA0193ZZ
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст