Nissan Qashqai (2007-2010). Manual — part 871
HA-54
< ON-VEHICLE REPAIR >
[AUTOMATIC AIR CONDITIONER (HR/MR)]
EVAPORATOR
5.
Slide evaporator (1) and intake sensor (2) from heater and cool-
ing unit assembly.
6.
Remove evaporator assembly.
7.
Cut upper insulator (3) and remove mounting bolt (A), expansion
valve (1) and pressure pipe assembly(2), from evaporator.
INSTALLATION
Installation is basically the reverse order of removal.
CAUTION:
• Replace O-rings of low-pressure pipe 1 and high-pressure pipe 2 with new ones, and then apply
compressor oil to it when installing it.
• Female-side piping connection is thin and easy to deform. Slowly insert the male-side piping
straight in axial direction.
• Insert piping securely until a click is heard.
• After piping connection is completed, pull male-side piping by hand to make sure that connection
does not come loose.
• O-rings are different from low-pressure flexible hose (high-pressure pipe 1) and low-pressure pipe 1
(high-pressure pipe 2).
• Mark the mounting position of intake sensor bracket prior to removal so that the reinstalled sensor
can be located in the same position.
• When recharging refrigerant, check for leaks.
E1KIA0061ZZ
E1KIA0062ZZ
EXPANSION VALVE
HA-55
< ON-VEHICLE REPAIR >
[AUTOMATIC AIR CONDITIONER (HR/MR)]
C
D
E
F
G
H
J
K
L
M
A
B
HA
N
O
P
EXPANSION VALVE
Exploded View
INFOID:0000000001093804
Removal and Installation
INFOID:0000000001093805
REMOVAL
1.
Remove evaporator. Refer to
HA-53, "Removal and Installation"
2.
Remove low pressure pipe 1 and high pressure pipe 2 assembly (2). Refer to
.
3.
Remove mounting bolts (A), and then remove expansion valve
(1) from low and high, pressure pipe assembly (2).
CAUTION:
Cap or wrap the joint of expansion valve, low and high pres-
sure pipe assembly, evaporator and expansion valve with
suitable material such as vinyl tape to avoid the entry of air.
1.
Heater & blower unit assembly
2.
Heater & cooling unit assembly
3.
Evaporator
4.
O-ring
5.
Low pressure pipe 1 and high pres-
sure pipe 2 assembly
6.
Expansion valve
7.
Heater sealing
8.
Low pressure flexible hose and pipe
2
9.
Low pressure pipe 2 fixing clamp as-
sembly
10. High pressure flexible hose
11.
Compressor
12. Low pressure flexible hose
13. Low & high pipe bracket support
14. High pressure pipe 1
15. Condenser assembly
16. Liquid tank fixing bracket
17. Refrigerant pressure sensor
18. Liquid tank
E1KIA0037GB
E1KIA0062ZZ
HA-56
< ON-VEHICLE REPAIR >
[AUTOMATIC AIR CONDITIONER (HR/MR)]
EXPANSION VALVE
INSTALLATION
Installation is basically the reverse order of removal.
CAUTION:
• Replace O-rings of evaporator with new ones, and then apply compressor oil to it when installing it.
• O-rings are different from low-pressure pipe 1 (high-pressure pipe 1) and low-pressure pipe 2 (high-
pressure pipe 2).
• When recharging refrigerant, check for leaks.
SERVICE DATA AND SPECIFICATIONS (SDS)
HA-57
< SERVICE DATA AND SPECIFICATIONS (SDS)
[AUTOMATIC AIR CONDITIONER (HR/MR)]
C
D
E
F
G
H
J
K
L
M
A
B
HA
N
O
P
SERVICE DATA AND SPECIFICATIONS (SDS)
SERVICE DATA AND SPECIFICATIONS (SDS)
Compressor
INFOID:0000000001093806
Lubricant
INFOID:0000000001093807
Refrigerant
INFOID:0000000001093808
Engine Idling Speed
INFOID:0000000001093809
(HR engine models with EURO-OBD),
(MR engine models with EURO-OBD) or
(MR engine models without EURO-OBD).
Belt Tension
INFOID:0000000001093810
(MR engine
models).
Model
CALSONICKANSEI
Type
Variable displacement swash plate
Displacement
cm
3
(cu in)/rev
Max.
120 (7.32)
Min.
6 (0.37)
Cylinder bore
×
stroke (Max.)
mm (in.)
32
×
29 (1.26
×
1.14)
Direction of rotation
Clockwise (viewed from clutch)
Drive belt
Poly V 7 groove (HR engine),
Poly V 6 groove (MR engine)
Model
CALSONICKANSEI
Name
Nissan A/C System Oil Type S (DH-PS)
Capacity
m
(US fl oz, lmp fl oz)
Total in system
150 (5.03, 5.3)
Compressor (Service part) charging
amount
150 (5.03, 5.3)
Type
HFC-134a (R-134a)
Capacity
kg (lb)
—
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст