Nissan Qashqai (2007-2010). Manual — part 1106
FRONT FENDER
DLK-503
< ON-VEHICLE REPAIR >
[WITH I-KEY & SUPER LOCK]
C
D
E
F
G
H
I
J
L
M
A
B
DLK
N
O
P
FRONT FENDER
Exploded View
INFOID:0000000001098477
Removal and Installation
INFOID:0000000001098478
REMOVAL
1.
Remove the outer fender protector. Refer to
EXT-22, "Removal and Installation"
2.
Remove the inner fender protector. Refer to
EXT-22, "Removal and Installation"
.
3.
Remove the side turn signal lamp. Refer to
EXL-178, "Removal and Installation"
4.
Remove the front bumper fascia. Refer to
EXT-11, "Removal and Installation"
.
5.
Remove the front combination lamp.
• XENON TYPE:
EXL-171, "Removal and Installation"
.
• HALOGEN TYPE:
EXL-327, "Removal and Installation"
.
6.
Remove the mounting clips and remove hoodledge cover.
7.
Remove the center mudguard. Refer to
EXT-28, "Removal and Installation"
1.
Hood seal assembly (side)
2.
Front fender finisher
3.
Front fender seal
4.
Front fender
: Metal clip
JMKIA0177ZZ
DLK-504
< ON-VEHICLE REPAIR >
[WITH I-KEY & SUPER LOCK]
FRONT FENDER
8.
Peel away the double-faced adhesive tape (A) of the front
fender seal (1) from the front fender (2).
9.
Remove the mounting bolts and remove the front fender.
CAUTION:
Use a shop cloth to protect the body from being damaged during removal.
10. Remove the following parts after removing the front fender.
• Front fender seal.
• Bumper side bracket. Refer to
.
INSTALLATION
Install in the reverse order of removal.
CAUTION:
• Replace the double-faced adhesive tape on the back of the cowl top cover seal with new tape.
• Do not wash the vehicle within 24 hours after installation so as to keep adhesive.
• After installation, apply the touch-up paint (the body color) onto the head of the front fender mount-
ing bolts.
• After installation, check the front fender adjustment. Refer to
DLK-830, "HOOD ASSEMBLY : Adjust-
DLK-842, "DOOR ASSEMBLY : Adjustment"
.
JMKIA0178ZZ
FRONT DOOR
DLK-505
< ON-VEHICLE REPAIR >
[WITH I-KEY & SUPER LOCK]
C
D
E
F
G
H
I
J
L
M
A
B
DLK
N
O
P
FRONT DOOR
DOOR ASSEMBLY
DOOR ASSEMBLY : Exploded View
INFOID:0000000001098479
REMOVAL
ADJUSTMENT
1.
Door check link
2.
Door hinge (upper)
3.
Door check link cover
4.
Door hinge (lower)
5.
Bracket
6.
Bumper rubber
7.
Front door panel
8.
Door striker
Refer to
JMKIA0179ZZ
DLK-506
< ON-VEHICLE REPAIR >
[WITH I-KEY & SUPER LOCK]
FRONT DOOR
DOOR ASSEMBLY : Removal and Installation
INFOID:0000000001098480
REMOVAL
1.
Remove the mounting bolts of the door check link on the vehicle.
2.
Remove the front door harness grommet, and then pull out the harness from the vehicle.
1.
Front fender
2.
Front door outer
3.
Rear door outer
4.
Rear fender
5.
Front door hinge (upper)
6.
Front door hinge (lower)
7.
Rear door hinge (upper)
8.
Rear door hinge (lower)
9.
Door striker
Refer to
for symbols in the figure.
JMKIA0195GB
PIIB6543E
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст