Nissan Qashqai (2007-2010). Manual — part 1047
REAR DOOR LOCK
DLK-267
< ON-VEHICLE REPAIR >
[WITH I-KEY, WITHOUT SUPER LOCK]
C
D
E
F
G
H
I
J
L
M
A
B
DLK
N
O
P
10. Reach in to separate the outside handle cable connection.
INSTALLATION
Install in the reverse order of removal.
CAUTION:
• Check the door lock/unlock operation after installation.
• Check the door open/close operation after installation.
PIIB5815E
DLK-268
< ON-VEHICLE REPAIR >
[WITH I-KEY, WITHOUT SUPER LOCK]
BACK DOOR LOCK
BACK DOOR LOCK
DOOR LOCK
DOOR LOCK : Exploded View
INFOID:0000000001091305
DOOR LOCK : Removal and Installation
INFOID:0000000001091306
REMOVAL
1.
Remove the back door trim finisher lower. Refer to
INT-26, "Removal and Installation"
.
2.
Disconnect the back door lock assembly and back door opener switch connectors.
3.
Remove the back door lock mounting bolts, and then remove the back door lock and actuator.
INSTALLTION
Install in the reverse order of removal.
CAUTION:
Check the back door lock/unlock operation after installation.
1.
Back door hinge
2.
Back door assembly
3.
Back door lock assembly
4.
Bumper rubber bracket
5.
Back door stay bracket (lower)
6.
Bumper rubber
7.
Back door stay
8.
Back door stay bracket (upper)
9.
Back door striker
Refer to
for symbols in the figure.
JMKIA0186ZZ
FUEL FILLER LID OPENER
DLK-269
< ON-VEHICLE REPAIR >
[WITH I-KEY, WITHOUT SUPER LOCK]
C
D
E
F
G
H
I
J
L
M
A
B
DLK
N
O
P
FUEL FILLER LID OPENER
FUEL FILLER LID
FUEL FILLER LID : Exploded View
INFOID:0000000001054835
FUEL FILLER LID : Removal and Installation
INFOID:0000000001054830
REMOVAL
1.
Fully open the fuel filler lid.
2.
Remove the filler cap.
3.
Remove the mounting screws (A), and then remove the fuel filler
lid (1).
INSTALLATION
Install in the reverse order of removal.
CAUTION:
After installation, apply the touch-up paint (the body color) onto the head of the mounting screws.
FUEL FILLER OPENER CABLE
1.
Fuel filler lid assembly
2.
Fuel filler opener cable
3.
Fuel opener lever
: Clip
JMKIA0187ZZ
JMKIA0181ZZ
DLK-270
< ON-VEHICLE REPAIR >
[WITH I-KEY, WITHOUT SUPER LOCK]
FUEL FILLER LID OPENER
FUEL FILLER OPENER CABLE : Exploded View
INFOID:0000000001091319
FUEL FILLER OPENER CABLE : Removal and Installation
INFOID:0000000001091923
REMOVAL
1.
Remove the rear seat cushion, rear seatback, seatback lower support, and seatback mounting outer
bracket. Refer to
SE-31, "Removal and Installation"
2.
Remove the dash side finisher, front kicking plate inner, rear kicking plate inner, center pillar lower gar-
nish, and luggage side lower finisher (front). Refer to
INT-14, "Removal and Installation"
3.
Remove the parcel shelf, luggage floor carpet, luggage floor spacer, luggage rear plate, luggage side
lower finisher, and rear pillar finisher. Refer to
INT-24, "Removal and Installation"
.
4.
Remove the fuel filler lock seal (1).
1.
Fuel filler lid assembly
2.
Fuel filler opener cable
3.
Fuel opener lever
: Clip
JMKIA0187ZZ
JMKIA0182ZZ
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст