Nissan Qashqai (2007-2010). Manual — part 1109
REAR DOOR
DLK-515
< ON-VEHICLE REPAIR >
[WITH I-KEY & SUPER LOCK]
C
D
E
F
G
H
I
J
L
M
A
B
DLK
N
O
P
DOOR HINGE : Removal and Installation
INFOID:0000000001098516
REMOVAL
1.
Remove the center pillar lower garnish and the center pillar upper garnish. Refer to
.
2.
Remove the rear door assembly. Refer to
DLK-242, "DOOR ASSEMBLY : Removal and Installation"
3.
Remove the rear door hinge mounting bolts and nuts (body side), and then remove the door hinge.
INSTALLATION
Install in the reverse order of removal.
CAUTION:
• When removing and installing the rear door assembly, perform the fitting adjustment. Refer to
848, "DOOR ASSEMBLY : Adjustment"
.
• Check the door hinge rotating part for poor lubrication. If necessary, apply body grease.
• After installing, apply the touch-up paint (the body color) onto the head of the hinge mounting nuts.
• Check the rear door open/close operation after installation.
DOOR CHECK LINK
DOOR CHECK LINK : Exploded View
INFOID:0000000001098518
1.
Door check link
2.
Door hinge (upper)
3.
Door hinge (lower)
4.
Bumper rubber
5.
Rear door panel
6.
Door striker
Refer to
JMKIA0180ZZ
DLK-516
< ON-VEHICLE REPAIR >
[WITH I-KEY & SUPER LOCK]
REAR DOOR
DOOR CHECK LINK : Removal and Installation
INFOID:0000000001098520
REMOVAL
1.
Remove the rear door finisher. Refer to
INT-10, "FRONT DOOR FINISHER : Removal and Installation"
2.
Remove the rear door sealing screen.
3.
Remove the mounting bolts of the check link on the vehicle.
4.
Remove the door check link cover, and then remove the door check link mounting bolts.
5.
Remove the door check link.
INSTALLATION
Install in the reverse order of removal.
CAUTION:
Check front door open/close operation after installation.
DOOR CHECK LINK : Removal and Installation
INFOID:0000000001098521
REMOVAL
1.
Door check link
2.
Door hinge (upper)
3.
Door hinge (lower)
4.
Bumper rubber
5.
Rear door panel
6.
Door striker
Refer to
for symbols in the figure.
JMKIA0180ZZ
PIIB6543E
REAR DOOR
DLK-517
< ON-VEHICLE REPAIR >
[WITH I-KEY & SUPER LOCK]
C
D
E
F
G
H
I
J
L
M
A
B
DLK
N
O
P
1.
Remove the rear door finisher. Refer to
INT-10, "FRONT DOOR FINISHER : Removal and Installation"
2.
Remove the rear door sealing screen.
3.
Remove the mounting bolts of the check link on the vehicle.
4.
Remove the door check link cover, and then remove the door check link mounting bolts.
5.
Remove the door check link.
INSTALLATION
Install in the reverse order of removal.
CAUTION:
Check front door open/close operation after installation.
PIIB6543E
DLK-518
< ON-VEHICLE REPAIR >
[WITH I-KEY & SUPER LOCK]
BACK DOOR
BACK DOOR
BACK DOOR ASSEMBLY
BACK DOOR ASSEMBLY : Exploded View
INFOID:0000000001098525
REMOVAL
ADJUSTMENT
1.
Back door hinge
2.
Back door assembly
3.
Back door lock assembly
4.
Bumper rubber bracket
5.
Back door stay bracket (lower)
6.
Bumper rubber
7.
Back door stay
8.
Back door stay bracket (upper)
9.
Back door striker
Refer to
for symbols in the figure.
JMKIA0186ZZ
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст