Nissan Pathfinder (2010 year). Instruction — part 198
TRANSFER ASSEMBLY
DLN-157
< DISASSEMBLY AND ASSEMBLY >
[TRANSFER: ATX14B]
C
E
F
G
H
I
J
K
L
M
A
B
DLN
N
O
P
16. Remove the 2-4 sleeve and L-H sleeve from the 2-4 fork and L-
H fork respectively.
17. Drive out the retaining pin from the shift rod using suitable tool.
18. Remove the L-H fork, 2-4 fork, shift fork spring and fork guide
from the shift rod.
19. Remove the input oil seal from the front case using suitable tool.
CAUTION:
Do not damage front case or sun gear.
20. Remove the snap ring from the sun gear.
CAUTION:
Do not damage front case or sun gear.
SMT992C
WDIA0134E
SDIA2142E
SDIA3382E
SDIA2144E
2010 Pathfinder
DLN-158
< DISASSEMBLY AND ASSEMBLY >
[TRANSFER: ATX14B]
TRANSFER ASSEMBLY
21. Remove the sun gear assembly and planetary carrier assembly
from the front case using Tool.
22. Remove the snap ring and internal gear using suitable tool.
23. Remove the front oil seal using suitable tool.
CAUTION:
Do not damage front case.
24. Remove the snap ring from the front case.
25. Remove the input bearing from the front case using Tool.
Tool number
: ST35300000 ( — )
SDIA2145E
SMT004D
SDIA2170E
SDIA2171E
Tool number
: ST33200000 (J-26082)
SDIA2178E
2010 Pathfinder
TRANSFER ASSEMBLY
DLN-159
< DISASSEMBLY AND ASSEMBLY >
[TRANSFER: ATX14B]
C
E
F
G
H
I
J
K
L
M
A
B
DLN
N
O
P
26. Remove the snap ring from the planetary carrier assembly using
suitable tool.
27. Remove the sun gear assembly from the planetary carrier
assembly.
28. Remove the snap ring from the sun gear assembly using suit-
able tool.
29. Remove the carrier bearing from the sun gear using Tools.
30. Remove the needle bearing from the sun gear using Tool.
SDIA2792E
SDIA2147E
SDIA2148E
Tool number
A: ST35300000 ( — )
B: ST30031000 ( — )
SDIA2149E
Tool number
: ST33710000 ( — )
SDIA2354E
2010 Pathfinder
DLN-160
< DISASSEMBLY AND ASSEMBLY >
[TRANSFER: ATX14B]
TRANSFER ASSEMBLY
31. Remove the metal bushing from the sun gear using Tools.
Center Case
1. Remove the rear case assembly. Refer to
DLN-154, "Disassembly and Assembly"
2. Remove the front case assembly. Refer to
DLN-154, "Disassembly and Assembly"
.
3. Hold the front drive shaft with one hand and tap to remove the
front drive shaft with the drive chain.
CAUTION:
Do not tap drive chain.
4. Remove the front drive shaft front bearing using Tools.
5. Remove the front drive shaft rear bearing using suitable tools.
Tool number
A: ST33710000 ( — )
B: ST35325000 ( — )
C: ST3329000 (J-34286)
SDIA2168E
SMT900C
Tool number
A: ST33052000 ( — )
B: ST30031000 ( — )
SDIA2106E
Tool number
A: ST33052000 ( — )
B: ST30031000 ( — )
SDIA2107E
2010 Pathfinder
TRANSFER ASSEMBLY
DLN-161
< DISASSEMBLY AND ASSEMBLY >
[TRANSFER: ATX14B]
C
E
F
G
H
I
J
K
L
M
A
B
DLN
N
O
P
6. Remove the neutral-4LO and ATP switches.
7. Remove the bolts and main oil pump cover.
8. Remove the outer gear, inner gear and main oil pump housing
from the center case.
9. Remove the seal ring from the main oil pump cover.
10. Remove the stem bleeder from the bleed hole.
SDIA2096E
SDIA2130E
SDIA2131E
SDIA2783E
SDIA2780E
2010 Pathfinder
DLN-162
< DISASSEMBLY AND ASSEMBLY >
[TRANSFER: ATX14B]
TRANSFER ASSEMBLY
11. Remove the snap ring and washer holder from the mainshaft.
12. Remove the C-rings from the mainshaft using suitable tool.
13. Set the center case on the press stand. Remove the mainshaft
from the center case.
14. Remove the snap ring from the mainshaft using suitable tool.
15. Remove the thrust needle bearing from the press flange.
SDIA2104E
SDIA2105E
SDIA2108E
SDIA2110E
SDIA2109E
2010 Pathfinder
TRANSFER ASSEMBLY
DLN-163
< DISASSEMBLY AND ASSEMBLY >
[TRANSFER: ATX14B]
C
E
F
G
H
I
J
K
L
M
A
B
DLN
N
O
P
16. Press the press flange until the snap ring is out of place using
Tools.
17. Remove the snap ring from the mainshaft using suitable tool.
18. Remove the press flange from the mainshaft.
19. Remove the return spring assembly from the clutch hub.
20. Remove each plate from the clutch drum.
Tool number
A: ST22452000 (J-34335)
B: ST30911000 ( — )
C: KV31103300 ( — )
SDIA2111E
SDIA2112E
SMT910C
SMT911C
SMT912C
2010 Pathfinder
DLN-164
< DISASSEMBLY AND ASSEMBLY >
[TRANSFER: ATX14B]
TRANSFER ASSEMBLY
21. Remove the snap ring from the mainshaft.
22. Remove the mainshaft from the clutch drum and clutch hub
using suitable tool.
23. Remove the needle bearing and spacer from the mainshaft.
24. Remove the snap ring from the clutch hub using suitable tool.
25. Remove the oil pressure check plug from the oil pressure check
port.
26. Apply air gradually from the oil pressure check port, and remove
the clutch piston assembly from the center case.
SDIA2113E
SMT914C
WDIA0101E
WDIA0227E
SDIA2116E
2010 Pathfinder
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст