Nissan Pathfinder (2010 year). Instruction — part 413
CLIP AND FASTENER
EXT-13
< ON-VEHICLE MAINTENANCE >
C
D
E
F
G
H
I
J
L
M
A
B
EXT
N
O
P
SIIA0317E
2010 Pathfinder
EXT-14
< ON-VEHICLE REPAIR >
FRONT BUMPER
ON-VEHICLE REPAIR
FRONT BUMPER
Removal and Installation
INFOID:0000000005259113
AWKIA0085GB
2010 Pathfinder
FRONT BUMPER
EXT-15
< ON-VEHICLE REPAIR >
C
D
E
F
G
H
I
J
L
M
A
B
EXT
N
O
P
REMOVAL
1. Remove the front grille. Refer to
.
2. Remove the front fender protectors LH and RH. Refer to
EXT-23, "Removal and Installation of Front
.
3. Remove the front valance LH, center, then RH.
4. Remove the engine undercover.
5. Disconnect the fog lamp harness connectors, if equipped.
6. Remove the front bumper fascia assembly.
7. Remove the front bumper.
8. Remove the front bumper bracket.
INSTALLATION
Installation is in the reverse order of removal.
1.
Front bumper stay RH
2.
Front bumper reinforcement RH
3.
Fog lamp opening finisher (if
equipped)
4.
Fog lamp (if equipped)
5.
Front bumper fascia assembly
6.
Front valance RH
7.
Front bumper protector assembly (if
equipped)
8.
Front valance center
9.
Front license plate bracket
10. Front valance LH
11. Engine under cover
12. Front bumper reinforcement
LH
13. Front bumper stay LH
14. Front bumper
15. Front bumper bracket
Vehicle front
2010 Pathfinder
EXT-16
< ON-VEHICLE REPAIR >
REAR BUMPER
REAR BUMPER
Removal and Installation
INFOID:0000000005259114
REMOVAL
1. Remove the LH and RH rear combination lamps. Refer to
EXL-156, "Removal and Installation"
2. Remove the mud flaps (if equipped).
3. Remove the rear fender protectors. Refer to
EXT-23, "Removal and Installation of Rear Fender Protector"
.
4. Remove the LH and RH rear fascia strut lower bolts.
5. Remove the rear fascia lower stay bolts.
6. Remove the fascia front upper bolts near the wheel opening.
7. Release the left pinch rail clips and remove the LH side of rear bumper fascia from the quarter panel.
8. Release the right pinch rail clips and remove the RH side of the rear bumper fascia from the quarter panel.
9. Remove the fascia rear upper bolts near the rear combination lamps LH/RH.
10. Remove the rear bumper fascia.
11. Disconnect the harness on left side of tow hitch.
12. Detach the I-key antenna, if equipped from the rear bumper reinforcement, then remove rear bumper rein-
forcement.
13. Remove the drafter duct from the lower side of LH quarter panel.
14. Remove the rear valance nuts and bolts, then remove the rear valance.
INSTALLATION
Installation is in the reverse order of removal.
1.
Rear valance
2.
Rear bumper reinforcement
3.
Rear bumper fascia
4.
Rear fascia strut LH/RH
5.
Step pad
6.
Clip
7.
Tow hitch
8.
Tow harness bracket
9.
Tow hitch harness
10. Rear fascia lower stay (LH shown)
11. Pinch rail
12. Washer
13. Drafter duct
14. Filter element
Vehicle front
AWKIA0067ZZ
2010 Pathfinder
REAR BUMPER
EXT-17
< ON-VEHICLE REPAIR >
C
D
E
F
G
H
I
J
L
M
A
B
EXT
N
O
P
• Apply sealant to clips securing upper step pad during installation.
2010 Pathfinder
EXT-18
< ON-VEHICLE REPAIR >
FRONT GRILLE
FRONT GRILLE
Removal and Installation
INFOID:0000000005259115
REMOVAL
1. Remove the upper clips from the front grille.
2. Twist and release the LH and RH side clips and release the top of the front grille.
3. Detach the lower front grille clips and remove the front grille.
INSTALLATION
Installation is in the reverse order of removal.
1.
Front grille
2.
Front emblem
A.
Clips CG101
B.
Clips C205
Vehicle front
AWKIA1511ZZ
2010 Pathfinder
COWL TOP
EXT-19
< ON-VEHICLE REPAIR >
C
D
E
F
G
H
I
J
L
M
A
B
EXT
N
O
P
COWL TOP
Removal and Installation
INFOID:0000000005259116
REMOVAL
1. Remove the front wiper arms. Refer to
WW-78, "Removal and Installation"
.
2. Remove the cowl top seal.
3. Remove the cowl top clips and lift the cowl top, disconnect the washer tubes from the washer nozzles and
remove the cowl top.
4. Release the clips and remove the LH and RH cowl top extensions.
INSTALLATION
Installation is in the reverse order of removal.
1.
Cowl top extension RH
2.
Cowl top
3.
Cowl top seal
4.
Cowl top extension LH
A.
Clip C205
B.
Clip C103
C.
Grommet CF110
Vehicle front
AWKIA0063ZZ
2010 Pathfinder
EXT-20
< ON-VEHICLE REPAIR >
FRONT FENDER
FRONT FENDER
Removal and Installation
INFOID:0000000005259117
REMOVAL
1. Remove the LH and RH headlamp assemblies. Refer to
EXL-148, "Removal and Installation"
.
2. Remove the front fender protector. Refer to
.
3. Remove the front bumper fascia. Refer to
EXT-14, "Removal and Installation"
.
4. Remove the hood prop rod and hood prop rod hold down clip.
5. Remove the front fender bolts from hoodledge and the dash panel.
6. Remove the front fender bolts from the rocker panel and the radiator core support member.
7. Remove the front fender.
INSTALLATION
Installation is in the reverse order of removal.
AWKIA0086GB
2010 Pathfinder
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст