Nissan Pathfinder (2010 year). Instruction — part 4
ADP-18
< FUNCTION DIAGNOSIS >
AUTOMATIC DRIVE POSITIONER SYSTEM
DETAIL FLOW
Item
Request status
Ignition position
ON
Switch inputs
• Power seat switch
• Pedal adjusting switch
• Door mirror control switch
• Set switch
• Seat memory switch
OFF
(Not operated)
A/T selector lever
P position
Order
Input
Output
Control unit condition
1
Memory switch
—
The memory switch signal is inputted to the automatic drive positioner
control unit when memory switch 1 or 2 is operated.
Memory switch signal is input to driver seat control unit via UART
communication.
2
—
Motors
(seat, pedal adjusting,
door mirror)
Driver seat control unit operates each motor of seat when it recogniz-
es the memory switch pressed for 0.5 second or more and requests
each motor operation to automatic drive positioner control unit via
UART communication. The automatic drive positioner control unit op-
erates each motor.
Memory switch Indica-
tor
Driver seat control unit requests the flashing of memory indicator to
automatic drive positioner control unit via UART communication while
either of the motors is operating. The automatic drive positioner con-
trol unit illuminates the memory indicator.
3
Sensors
(seat, pedal adjust-
ing, door mirror)
—
Driver seat control unit judges the operating seat position with each
seat sensor input. The positions of the adjustable pedals and outside
mirror are monitored with each sensor signal that is input from auto
drive positioner control unit via UART communication. Driver seat
control unit stops the operation of each motor when each part reach-
es the recorded address.
4
—
Memory switch Indica-
tor
Driver seat control unit requests the illumination of memory indicator
to auto drive positioner control unit via UART communication after all
motors stop. The auto driving positioner control unit illuminates the
memory indicator for 5 seconds.
2010 Pathfinder
AUTOMATIC DRIVE POSITIONER SYSTEM
ADP-19
< FUNCTION DIAGNOSIS >
C
D
E
F
G
H
I
K
L
M
A
B
ADP
N
O
P
MEMORY FUNCTION : Component Parts Location
INFOID:0000000005488314
MEMORY FUNCTION : Component Description
INFOID:0000000005256610
CONTROL UNITS
INPUT PARTS
LIIA2405E
1.
A. BCM M18, M19, M20
B. Pedal adjusting motor E109, E110
(view with lower instrument panel LH
removed)
2.
A. Door mirror LH D18, RH D118
B. Front door switch LH B8
3.
Seat memory switch D5
4.
A. Pedal adjusting switch M96
B. Door mirror remote control switch
M163
5.
A. A/T selector lever
B. A/T shift selector (park position
switch) M156
6.
A. Sliding motor LH B204, reclining
motor LH B232, lifting motor (front)
B206, lifting motor (rear) B207
B. Driver seat control unit B202,
B203
C. Power seat switch LH B208
(front seat LH view)
7.
A. Automatic drive positioner control
unit M33, M34
B. Circuit breaker-2 M82 (view with
instrument panel removed)
Item
Function
Driver seat control unit
• The address of each part is recorded.
• Operates each motor of seat to the registered position.
• Requests the operations of pedal assembly and door mirror to automatic drive po-
sitioner control unit
Automatic drive positioner control unit
Operates the pedal adjusting motor and door mirror with the instructions from the
driver seat control.
2010 Pathfinder
ADP-20
< FUNCTION DIAGNOSIS >
AUTOMATIC DRIVE POSITIONER SYSTEM
Switches
Sensors
OUTPUT PARTS
EXIT ASSIST FUNCTION
EXIT ASSIST FUNCTION : System Diagram
INFOID:0000000005256611
Item
Function
Memory switch 1/2
The registration and memory function can be performed with its operation.
Item
Function
Door mirror sensor (LH/RH)
Detect the up/down and left/right position of outside mirror face.
Pedal adjusting sensor
Detect the forward/backward position of pedal assembly.
Lifting sensor (front)
Detect the up/down position of seat lifting (front).
Lifting sensor (rear)
Detect the up/down position of seat lifting (rear).
Reclining sensor
Detect the tilt of seatback.
Sliding sensor
Detect the front/rear position of seat.
Item
Function
Door mirror motor (LH/RH)
Move the outside mirror face up/down and left/right.
Pedal adjusting motor
Move the pedal assembly forward/backward.
Lifting motor (front)
Move the seat lifter (front) up/down.
Lifting motor (rear)
Move the seat lifter (rear) up/down.
Reclining motor
Tilt and raise up the seatback.
Sliding motor
Slide the seat forward/backward.
Memory indicator
Illuminates or blinks according to the registration/operation status.
ALJIA0188GB
2010 Pathfinder
AUTOMATIC DRIVE POSITIONER SYSTEM
ADP-21
< FUNCTION DIAGNOSIS >
C
D
E
F
G
H
I
K
L
M
A
B
ADP
N
O
P
EXIT ASSIST FUNCTION : System Description
INFOID:0000000005256612
OUTLINE
When exiting, if the conditions are satisfied, the seat is moved backward from normal sitting position.
The seat slide amount at entry/exit operation can be changed.
NOTE:
• This function is set to OFF before delivery (initial setting).
• Further information for the system setting procedure. Refer to Owner’s Instruction.
OPERATION PROCEDURE
1. Open the driver door with ignition switch in OFF position.
2. Front seat LH will move to the exiting position.
OPERATION CONDITION
Satisfy all of the following items. The exit assist function is not performed if these items are not satisfied.
DETAIL FLOW
Item
Request status
Ignition switch
OFF
System setting [Entry/exit assist function]
ON
Initialization
Done
Switch inputs
• Power seat switch
• Pedal adjusting switch
• Door mirror remote control switch
• Set switch
• Seat memory switch
OFF
(Not operated)
A/T selector lever
P position
Order
Input
Output
Control unit condition
1
Front door switch LH
—
Driver seat control unit receives front door switch LH signal (open)
from BCM via CAN communication.
2
—
Motor (seat sliding)
Driver seat control unit operates the seat sliding motor, which recog-
nizes that the front door LH is opened with ignition switch OFF.
2010 Pathfinder
ADP-22
< FUNCTION DIAGNOSIS >
AUTOMATIC DRIVE POSITIONER SYSTEM
EXIT ASSIST FUNCTION : Component Parts Location
INFOID:0000000005488315
EXIT ASSIST FUNCTION : Component Description
INFOID:0000000005256614
CONTROL UNITS
INPUT PARTS
Switches
LIIA2405E
1.
A. BCM M18, M19, M20
B. Pedal adjusting motor E109, E110
(view with lower instrument panel LH
removed)
2.
A. Door mirror LH D18, RH D118
B. Front door switch LH B8
3.
Seat memory switch D5
4.
A. Pedal adjusting switch M96
B. Door mirror remote control switch
M163
5.
A. A/T selector lever
B. A/T shift selector (park position
switch) M156
6.
A. Sliding motor LH B204, reclining
motor LH B232, lifting motor (front)
B206, lifting motor (rear) B207
B. Driver seat control unit B202,
B203
C. Power seat switch LH B208
(front seat LH view)
7.
A. Automatic drive positioner control
unit M33, M34
B. Circuit breaker-2 M82 (view with
instrument panel removed)
Item
Function
Driver seat control unit
Operates the seat sliding motor for a constant amount.
BCM
Recognizes the following status and transmits it to the driver seat control unit via
CAN communication.
• Front door LH: OPEN/CLOSE
2010 Pathfinder
AUTOMATIC DRIVE POSITIONER SYSTEM
ADP-23
< FUNCTION DIAGNOSIS >
C
D
E
F
G
H
I
K
L
M
A
B
ADP
N
O
P
Sensors
OUTPUT PARTS
ENTRY ASSIST FUNCTION
ENTRY ASSIST FUNCTION : System Diagram
INFOID:0000000005256615
ENTRY ASSIST FUNCTION : System Description
INFOID:0000000005256616
OUTLINE
The seat is in the exiting position when either following condition (A or B) is satisfied, the seat returns from
exiting position to the previous driving position.
NOTE:
• This function is set to OFF before delivery (initial setting).
• Further information for the system setting procedure. Refer to Owner’s Instruction.
OPERATION PROCEDURE
1. A: Turn the ignition switch ON.
B: Turn the ignition switch from OFF to ACC after closing the driver door.
2. Front seat LH will return from the exiting position to entry position.
OPERATION CONDITION
Satisfy all of the following items. The entry assist function is not performed if these items are not satisfied.
Item
Function
Front door switch LH
Detect front door LH open/close status.
Item
Function
Sliding sensor
Detect the front/rear position of seat.
Item
Function
Sliding motor
Slide the seat forward/backward.
ALJIA0188GB
2010 Pathfinder
ADP-24
< FUNCTION DIAGNOSIS >
AUTOMATIC DRIVE POSITIONER SYSTEM
DETAIL FLOW
ENTRY ASSIST FUNCTION : Component Parts Location
INFOID:0000000005488316
Item
Request status
Seat
The vehicle is not moved after performing the
exit assist function.
Switch inputs
• Power seat switch
• Pedal adjusting switch
• Door mirror control switch
• Set switch
• Memory switch
OFF
(Not operated)
A/T selector lever
P position
Order
Input
Output
Control unit condition
1
Door switch/Ignition
switch
—
Driver seat control unit receives the signals of ignition switch signal
and front door switch from BCM via CAN communication.
2
—
Motor (sliding)
Driver seat control unit operates the sliding motor when the operating
conditions are satisfied.
Sensor (sliding)
—
Sensor monitors the operating positions of seat and then stops the
operation of motor when seat reaches the recorded address.
LIIA2405E
2010 Pathfinder
AUTOMATIC DRIVE POSITIONER SYSTEM
ADP-25
< FUNCTION DIAGNOSIS >
C
D
E
F
G
H
I
K
L
M
A
B
ADP
N
O
P
ENTRY ASSIST FUNCTION : Component Description
INFOID:0000000005256618
CONTROL UNITS
INPUT PARTS
Switches
Sensors
OUTPUT PARTS
1.
A. BCM M18, M19, M20
B. Pedal adjusting motor E109, E110
(view with lower instrument panel LH
removed)
2.
A. Door mirror LH D18, RH D118
B. Front door switch LH B8
3.
Seat memory switch D5
4.
A. Pedal adjusting switch M96
B. Door mirror remote control switch
M163
5.
A. A/T selector lever
B. A/T shift selector (park position
switch) M156
6.
A. Sliding motor LH B204, reclining
motor LH B232, lifting motor (front)
B206, lifting motor (rear) B207
B. Driver seat control unit B202,
B203
C. Power seat switch LH B208
(front seat LH view)
7.
A. Automatic drive positioner control
unit M33, M34
B. Circuit breaker-2 M82 (view with
instrument panel removed)
Item
Function
Driver seat control unit
According to the ignition signal and front door switch LH signal from BCM,
• Operates the seat sliding motor for a constant amount.
BCM
Recognizes the following status and transmits it to the driver seat control unit via
CAN communication.
• Front door LH: OPEN/CLOSE
• Ignition switch position: ACC/ON
Item
Function
Front door switch LH
Detect front door LH open/close status.
Item
Function
Sliding sensor
Detect the front/rear position of seat.
Item
Function
Sliding motor
Slide the seat forward/backward.
2010 Pathfinder
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст