Nissan Tiida C11. Instruction — part 1359
ROAD TEST
TM-487
< ON-VEHICLE MAINTENANCE >
[TYPE 2 (4AT: RE4F03B)]
C
E
F
G
H
I
J
K
L
M
A
B
TM
N
O
P
When lock-up duty becomes 94%. Refer to
XX-XX, "*****"
.
Does A/T hold lock-up condition for more than 30 seconds?
YES
>> GO TO 7.
NO
>> • Mark the box on the
XX-XX, "*****"
.
• GO TO
TM-151, "A/T Does Not Hold Lock-up Condition"
.
• Continue “Road Test”.
7.
CHECK SHIFT-DOWN (D
4
L/U TO D
4
)
Release accelerator pedal.
When lock-up duty becomes 4%. Refer to
XX-XX, "*****"
.
Is lock-up released when accelerator pedal is released?
YES
>> GO TO 8.
NO
>> • Mark the box on the
XX-XX, "*****"
.
• GO TO
TM-152, "Lock-up Is Not Released"
• Continue “Road Test”.
8.
CHECK SHIFT-DOWN (D
4
TO D
3
)
Decelerate vehicle by applying foot brake lightly.
Read gear position and engine speed. Refer to
XX-XX,
"*****"
.
Does engine speed return to idle smoothly when A/T is shifted from
D
4
to D
3
?
YES
>> 1.
Stop vehicle.
2.
Go to
TM-487, "Cruise Test - Part 2"
.
NO
>> • Mark the box on the
XX-XX, "*****"
.
• GO TO
TM-153, "Engine Speed Does Not Return to
.
• Continue “Road Test”.
Cruise Test - Part 2
INFOID:0000000001726686
1.
CHECK STARTING GEAR (D
1
) POSITION
1.
Push overdrive control switch. (OD OFF indicator lamp is off.)
2.
Move selector lever to “D” position.
3.
Accelerate vehicle by half throttle again.
Read gear position. Refer to
XX-XX, "*****"
.
Does vehicle start from D
1
?
YES
>> GO TO 2.
NO
>> • Mark the box on the
XX-XX, "*****"
.
• GO TO
TM-145, "Vehicle Cannot Be Started from D
.
• Continue “Road Test”.
2.
CHECK SHIFT-UP AND SHIFT-DOWN (D
3
TO D
4
TO D
2
)
1.
Accelerate vehicle to 80 km/h (50 MPH) as shown in the figure.
SAT959I
SAT495G
TM-488
< ON-VEHICLE MAINTENANCE >
[TYPE 2 (4AT: RE4F03B)]
ROAD TEST
2.
Release accelerator pedal and then quickly depress it fully.
Read gear position and throttle opening. Refer to
XX-XX,
"*****"
.
Does A/T shift from D
4
to D
2
as soon as accelerator pedal is
depressed fully?
YES
>> GO TO 3.
NO
>> • Mark the box on the
XX-XX, "*****"
.
• GO TO
TM-146, "A/T Does Not Shift: D
• Continue “Road Test”.
3.
CHECK SHIFT-UP (D
2
TO D
3
)
Check shift-up (D
2
to D
3
)
Specified speed when shifting from D
2
to D
3
. Refer to
TM-490, "Vehicle Speed When Shifting Gears"
.
Read gear position, throttle opening and vehicle speed.
Refer to
XX-XX, "*****"
.
Does A/T shift from D
2
to D
3
at the specified speed?
YES
>> GO TO 4.
NO
>> • Mark the box on the
XX-XX, "*****"
.
• GO TO
TM-148, "A/T Does Not Shift: D
• Continue “Road Test”.
4.
CHECK SHIFT-UP (D
3
TO D
4
) AND ENGINE BRAKE
Release accelerator pedal after shifting from D
2
to D
3
.
Read gear position, throttle opening and vehicle speed.
Refer to
XX-XX, "*****"
.
Does A/T shift from D
3
to D
4
and does vehicle decelerate by engine
brake?
YES
>> 1.
Stop vehicle.
2.
Go to
TM-488, "Cruise Test - Part 3"
.
NO
>> • Mark the box on the
XX-XX, "*****"
.
• GO TO
TM-149, "A/T Does Not Shift: D
• Continue “Road Test”.
Cruise Test - Part 3
INFOID:0000000001726687
1.
CHECK SHIFT-DOWN (D
4
TO D
3
) (WITH OVERDRIVE CONTROL SWITCH)
1.
Push overdrive control switch. (OD OFF indicator lamp is off.)
2.
Move selector lever to “D” position.
3.
Accelerate vehicle using half throttle to D
4
.
SCIA7192E
SAT960I
SAT405H
SAT812A
ROAD TEST
TM-489
< ON-VEHICLE MAINTENANCE >
[TYPE 2 (4AT: RE4F03B)]
C
E
F
G
H
I
J
K
L
M
A
B
TM
N
O
P
4.
Release accelerator pedal.
5.
Push overdrive control switch. (OD OFF indicator lamp is on.)
Read gear position and vehicle speed. Refer to
XX-XX,
"*****"
.
Does A/T shift from D
4
to D
3
(OD OFF)?
YES
>> GO TO 2.
NO
>> • Mark the box on the
XX-XX, "*****"
.
• GO TO
TM-154, "A/T Does Not Shift: D
• Continue “Road Test”.
2.
CHECK ENGINE BRAKE
Check engine brake.
Does vehicle decelerate by engine brake?
YES
>> GO TO 3.
NO
>> • Mark the box on the
XX-XX, "*****"
.
• GO TO
TM-158, "Vehicle Does Not Decelerate by
• Continue “Road Test”.
3.
CHECK SHIFT-DOWN (D
3
TO 2
2
)
Move selector lever from “D” to “2” position while driving in D
3
(OD
OFF).
Read gear position. Refer to
XX-XX, "*****"
.
Does A/T shift from D
3
(OD OFF) to 2
2
?
YES
>> GO TO 4.
NO
>> • Mark the box on the
XX-XX, "*****"
.
TM-155, "A/T Does Not Shift: D
• Continue “Road Test”.
4.
CHECK ENGINE BRAKE
SAT813A
SCIA5469E
SCIA5469E
SAT791GA
TM-490
< ON-VEHICLE MAINTENANCE >
[TYPE 2 (4AT: RE4F03B)]
ROAD TEST
Check engine brake.
Does vehicle decelerate by engine brake?
YES
>> GO TO 5.
NO
>> • Mark the box on the
XX-XX, "*****"
.
• GO TO
TM-158, "Vehicle Does Not Decelerate by
• Continue “Road Test”.
5.
CHECK SHIFT-DOWN (2
2
TO 1
1
)
Move selector lever from “2” to “1” position while driving in 2
2
.
Read gear position. Refer to
XX-XX, "*****"
.
Does A/T shift from 2
2
to 1
1
position?
YES
>> GO TO 6.
NO
>> • Mark the box on the
XX-XX, "*****"
.
• GO TO
TM-156, "A/T Does Not Shift: 2
.
• Continue “Road Test”.
6.
CHECK ENGINE BRAKE
Check engine brake.
Does vehicle decelerate by engine brake?
YES
>> 1.
Stop vehicle.
2.
Perform self-diagnosis. Refer to
XX-XX, "*****"
,
XX-
XX, "*****"
.
NO
>> • Mark the box on the
XX-XX, "*****"
.
• GO TO
TM-158, "Vehicle Does Not Decelerate by
• Stop “Road Test”.
Vehicle Speed When Shifting Gears
INFOID:0000000001726688
• At half throttle, the accelerator opening is 4/8 of the full opening.
Vehicle Speed When Performing and Releasing Complete Lock-up
INFOID:0000000001726689
SAT791GA
SAT778B
SAT778B
Throttle position
Vehicle speed [km/h (MPH)]
D
1
→
D
2
D
2
→
D
3
D
3
→
D
4
D
4
→
D
3
D
3
→
D
2
D
2
→
D
1
Full throttle
51 - 59
(32 - 37)
97 - 105
(60 - 65)
154 - 162
(96 - 101)
150 - 158
(93 - 98)
87 - 95
(54 - 59)
41 - 49
(25 - 30)
Half throttle
31 - 39
(19 - 24)
60 - 68
(37 - 42)
122 - 130
(76 - 81)
63 - 71
(39 - 44)
36 - 44
(22 - 27)
5 - 13
(3 - 8)
Throttle position
Selector lever position
Vehicle speed [km/h (MPH)]
Lock-up “ON”
Lock-up “OFF”
2.0 / 8
D position
76 - 84 (47 - 52)
56 - 64 (35 - 40)
D position (OD OFF)
86 - 94 (53 - 58)
83 - 91 (52 - 57)
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст