Nissan Tiida C11. Instruction — part 1358
ROAD TEST
TM-483
< ON-VEHICLE MAINTENANCE >
[TYPE 2 (4AT: RE4F03B)]
C
E
F
G
H
I
J
K
L
M
A
B
TM
N
O
P
Check at Idle
INFOID:0000000001726684
1.
CHECK ENGINE START
1.
Park vehicle on flat surface.
2.
Turn ignition switch ON. (Do not start engine.)
3.
Move selector lever to “P” or “N” position.
4.
Turn ignition switch to “START” position.
Is engine started?
YES
>> GO TO 2.
NO
>> • Stop “Road Test”. Mark the box on the
XX-XX, "*****"
.
TM-140, "Engine Cannot Be Started in "P" and
.
2.
CHECK ENGINE START
1.
Turn ignition switch ON. (Do not start engine.)
2.
Move selector lever to “R”, “D”, “2” or “1” position.
3.
Turn ignition switch to “START” position.
Is engine started?
YES
>> • Stop “Road Test”. Mark the box on the
XX-XX, "*****"
.
TM-140, "Engine Cannot Be Started in "P" and
.
• Continue “Road Test”.
NO
>> GO TO 3.
3.
CHECK VEHICLE MOVE
1.
Move selector lever to “P” position.
2.
Turn ignition switch OFF.
3.
Release parking brake.
4.
Push vehicle forward or backward.
Does vehicle move when it is pushed forward or backyard?
YES
>> • Mark the box on the
XX-XX, "*****"
.
TM-140, "In "P" Position, Vehicle Moves For-
.
• Continue “Road Test”.
NO
>> GO TO 4.
4.
CHECK VEHICLE MOVE
1.
Apply parking brake.
SAT769B
SAT770B
SAT768B
SAT796A
TM-484
< ON-VEHICLE MAINTENANCE >
[TYPE 2 (4AT: RE4F03B)]
ROAD TEST
2.
Start engine.
3.
Move selector lever to “N” position.
4.
Release parking brake.
Does vehicle move forward or backward?
YES
>> • Mark the box on the
XX-XX, "*****"
.
• GO TO
TM-141, "In "N" Position, Vehicle Moves"
• Continue “Road Test”.
NO
>> GO TO 5.
5.
CHECK SHIFT SHOCK
1.
Apply foot brake.
2.
Move selector lever to “R” position.
Is there large shock when changing from “N” to “R” position?
YES
>> • Mark the box on the
XX-XX, "*****"
.
• GO TO
• Continue “Road Test”.
NO
>> GO TO 6.
6.
CHECK VEHICLE MOVE
Release foot brake for several seconds.
Does vehicle creep backward when foot brake is released?
YES
>> GO TO 7.
NO
>> • Mark the box on the
XX-XX, "*****"
.
• GO TO
TM-142, "Vehicle Does Not Creep Backward
• Continue “Road Test”.
7.
CHECK VEHICLE MOVE
SAT771B
SAT797A
SAT772B
SAT799A
ROAD TEST
TM-485
< ON-VEHICLE MAINTENANCE >
[TYPE 2 (4AT: RE4F03B)]
C
E
F
G
H
I
J
K
L
M
A
B
TM
N
O
P
Move selector lever to “D”, “2” and “1” positions and check if vehicle
creeps forward.
Does vehicle creep forward in all three positions?
YES
>> GO TO
TM-485, "Cruise Test - Part 1"
.
NO
>> • Mark the box on the
XX-XX, "*****"
.
TM-144, "Vehicle Does Not Creep Forward in
.
• Continue “Road Test”.
Cruise Test - Part 1
INFOID:0000000001726685
1.
CHECK STARTING GEAR (D
1
) POSITION
1.
Drive vehicle for approximately 10 minutes to warm engine oil and ATF up to operating temperature.
2.
Park vehicle on flat surface.
3.
Push overdrive control switch. (OD OFF indicator lamp is off.)
4.
Move selector lever to “P” position.
5.
Start engine.
6.
Move selector lever to “D” position.
7.
Accelerate vehicle by constantly depressing accelerator pedal
half-way.
Read gear position. Refer to
XX-XX, "*****"
.
Does vehicle start from D
1
?
YES
>> GO TO 2.
NO
>> • Mark the box on the
XX-XX, "*****"
.
• GO TO
TM-145, "Vehicle Cannot Be Started from D
.
• Continue “Road Test”.
2.
CHECK SHIFT-UP (D
1
TO D
2
)
Check shift-up (D
1
to D
2
).
Specified speed when shifting from D
1
to D
2.
Refer to
TM-490, "Vehicle Speed When Shifting Gears"
.
SAT773B
ATF operating temperature:
50 - 80
°
C (122 - 176
°
F)
SCIA5472E
SAT775B
SAT495G
TM-486
< ON-VEHICLE MAINTENANCE >
[TYPE 2 (4AT: RE4F03B)]
ROAD TEST
Read gear position, throttle opening and vehicle speed.
Refer to
XX-XX, "*****"
.
Does A/T shift from D
1
to D
2
at the specified speed?
YES
>> GO TO 3.
NO
>> • Mark the box on the
XX-XX, "*****"
.
• GO TO
TM-146, "A/T Does Not Shift: D
• Continue “Road Test”.
3.
CHECK SHIFT-UP (D
2
TO D
3
)
Check shift-up (D
2
to D
3
).
Specified speed when shifting from D
2
to D
3.
Refer to
TM-490, "Vehicle Speed When Shifting Gears"
.
Read gear position, throttle opening and vehicle speed.
Refer to
XX-XX, "*****"
.
Does A/T shift from D
2
to D
3
at the specified speed?
YES
>> GO TO 4.
NO
>> • Mark the box on the
XX-XX, "*****"
.
• GO TO
TM-148, "A/T Does Not Shift: D
• Continue “Road Test”.
4.
CHECK SHIFT-UP (D
3
TO D
4
)
Check shift-up (D
3
to D
4
).
Specified speed when shifting from D
3
to D
4.
Refer to
TM-490, "Vehicle Speed When Shifting Gears"
.
Read gear position, throttle opening and vehicle speed.
Refer to
XX-XX, "*****"
.
Does A/T shift from D
3
to D
4
at the specified speed?
YES
>> GO TO 5.
NO
>> • Mark the box on the
XX-XX, "*****"
.
• GO TO
TM-149, "A/T Does Not Shift: D
• Continue “Road Test”.
5.
CHECK LOCK-UP (D
4
TO D
4
L/U)
Check lock-up (D
4
to D
4
L/U).
Specified speed when lock-up occurs. Refer to
TM-490, "Vehicle Speed When Performing and Releasing
.
Read vehicle speed, throttle opening when lock-up duty
becomes 94%. Refer to
XX-XX, "*****"
.
Does A/T perform lock-up at the specified speed?
YES
>> GO TO 6.
NO
>> • Mark the box on the
XX-XX, "*****"
.
• GO TO
TM-151, "A/T Does Not Perform Lock-up"
.
• Continue “Road Test”.
6.
CHECK LOCK-UP HOLD
Check lock-up hold.
SCIA7188E
SCIA7189E
SCIA7190E
SCIA7191E
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст