Nissan Tiida C11. Instruction — part 1161
SEC-16
< FUNCTION DIAGNOSIS >
[WITH INTELLIGENT KEY SYSTEM]
DIAGNOSIS SYSTEM (BCM)
DATA MONITOR
ACTIVE TEST
THEFT ALM
THEFT ALM : CONSULT-III Function (BCM - THEFT ALM)
INFOID:0000000001404048
APPLICATION ITEM
CONSULT-III performs the following functions via CAN communication with BCM.
DATA MONITOR
ACTIVE TEST
WORK SUPPORT
Diagnosis mode
Function Description
DATA MONITOR
The BCM input/output signals are displayed.
ACTIVE TEST
The signals used to activate each device are forcibly supplied from Intelligent Key unit.
Monitor item
Content
IGN ON SW
Indicates [ON/OFF] condition of ignition switch in ON position.
KEY ON SW
Indicates [ON/OFF] condition of key switch.
PUSH SW
Indicates [ON/OFF] condition of ignition knob switch.
Test item
Description
THEFT IND
This test is able to check security indicator operation [ON/OFF].
Diagnosis mode
Function Description
WORK SUPPORT
Changes the setting for each system function.
DATA MONITOR
The BCM input/output signals are displayed.
ACTIVE TEST
The signals used to activate each device are forcibly supplied from BCM.
Monitor Item
Condition
IGN ON SW
Indicates [ON/OFF] condition of ignition switch in ON position.
ACC ON SW
Indicates [ON/OFF] condition of ignition switch in ACC position.
PUSH SW
Indicates [ON/OFF] condition of ignition knob switch.
KEY ON SW
Indicates [ON/OFF] condition of key switch.
I-KEY LOCK
Indicates [ON/OFF] condition of lock signal from Intelligent Key.
I-KEY UNLOCK
Indicates [ON/OFF] condition of unlock signal from Intelligent Key.
DOOR SW-DR
Indicates [ON/OFF] condition of front door switch (driver side).
DOOR SW-AS
Indicates [ON/OFF] condition of front door switch (passenger side).
DOOR SW-RR
Indicates [ON/OFF] condition of rear door switch RH.
DOOR SW-RL
Indicates [ON/OFF] condition of rear door switch LH.
BACK DOOR SW
Indicates [ON/OFF] condition of back door switch.
CDL LOCK SW
Indicates [ON/OFF] condition of door lock and unlock switch.
CDL UNLOCK SW
Indicates [ON/OFF] condition of door lock and unlock switch.
Test item
Description
THEFT IND
This test is able to check security indicator operation [ON/OFF].
FLASHER
This test is able to check flasher operation [LH/RH/OFF].
DIAGNOSIS SYSTEM (BCM)
SEC-17
< FUNCTION DIAGNOSIS >
[WITH INTELLIGENT KEY SYSTEM]
C
D
E
F
G
H
I
J
L
M
A
B
SEC
N
O
P
Test item
Description
SECURITY ALARM SET
Vehicle security function mode can be changed in this mode.
• ON: Vehicle security function is ON.
• OFF: Vehicle security function is OFF.
THEFT ALM TRG
The switch which triggered vehicle security system is recorded. This mode can be able to con-
firm and erase the record of vehicle security system.
SEC-18
< FUNCTION DIAGNOSIS >
[WITH INTELLIGENT KEY SYSTEM]
DIAGNOSIS SYSTEM (INTELLIGENT KEY UNIT)
DIAGNOSIS SYSTEM (INTELLIGENT KEY UNIT)
CONSULT-III Function (INTELLIGENT KEY)
INFOID:0000000001404049
APPLICATION ITEM
CONSULT-III performs the following functions via CAN communication with Intelligent Key unit.
WORK SUPPORT
SELF-DIAG RESULT
DATA MONITOR
Diagnosis mode
Function Description
WORK SUPPORT
Changes the setting for each system function.
SELF-DIAG RESULTS
Displays the diagnosis results judged by Intelligent Key unit.
CAN DIAG SUPPORT MNTR
Monitors the reception status of CAN communication viewed from Intelligent Key unit.
DATA MONITOR
The Intelligent Key unit input/output signals are displayed.
ACTIVE TEST
The signals used to activate each device are forcibly supplied from Intelligent Key unit.
ECU IDENTIFICATION
The Intelligent Key unit part number is displayed.
Support item
Description
Selection item
Condition
CONFIRM KEY FOB ID
It can check whether Intelligent Key ID code
is registered or not.
—
—
TAKE OUT FROM WINDOW WARN
Take away warning chime (from window)
mode can be changed.
ON
Active
OFF
Inactive
LOW BATT OF KEY FOB WARN
Intelligent Key low battery warning mode can
be changed.
ON
Active
OFF
Inactive
KEYLESS FUNCTION
Door lock function with Intelligent Key can be
changed.
ON
Active
OFF
Inactive
ANSWER BACK FUNCTION
Buzzer reminder operation can be changed.
ON
Active
OFF
Inactive
SELECTIVE UNLOCK FUNCTION
Anti-hijack mode can be changed.
ON
Active
OFF
Inactive
HAZARD ANSWER BACK
Hazard reminder operation mode can be
changed.
Refer to
XX-XX, "*****"
.
ANSWER BACK WITH I-KEY LOCK
Buzzer reminder operation (lock operation)
mode by each door request switch can be
changed.
BUZZER
Active
OFF
Inactive
ANSWER BACK WITH I-KEY UNLOCK
Buzzer reminder operation (unlock operation)
mode by each door request switch can be
changed.
BUZZER
Active
OFF
Inactive
AUTO RELOCK TIMER
Auto door lock operation mode can be
changed.
OFF
Inactive
2 min
Active
ENGINE START BY I-KEY
Engine start function (by Intelligent Key)
mode can be changed.
ON
Active
OFF
Inactive
LOCK/UNLOCK BY I-KEY
Door lock function by door request switch can
be changed.
ON
Active
OFF
Inactive
DIAGNOSIS SYSTEM (INTELLIGENT KEY UNIT)
SEC-19
< FUNCTION DIAGNOSIS >
[WITH INTELLIGENT KEY SYSTEM]
C
D
E
F
G
H
I
J
L
M
A
B
SEC
N
O
P
ACTIVE TEST
Monitor Item
Condition
PUSH SW
Indicates [ON (pressed)/OFF (released)] condition of ignition knob switch.
KEY SW
Indicates [ON (inserted)/OFF (removed)] condition of key switch.
DR REQ SW
Indicates [ON (pressed)/OFF (released)] condition of door request switch (driver side).
AS REQ SW
Indicates [ON (pressed)/OFF (released)] condition of door request switch (passenger
side).
BD/TR REQ SW
Indicates [ON (pressed)/OFF (released)] condition of door request switch (back door).
IGN SW
Indicates [ON (ON or START position)/OFF (other than ON and START position)] con-
dition of ignition switch ON position.
ACC SW
Indicates [ON/OFF] condition of ignition switch ACC position.
STOP LAMP SW
Indicates [ON/OFF] condition of stop lamp switch.
DOOR LOCK SIG
Indicates [ON/OFF] condition of LOCK signal from Intelligent Key.
DOOR UNLOCK SIG
Indicates [ON/OFF] condition of UNLOCK signal from Intelligent Key.
DOOR SW DR
Indicates [OPEN/CLOSE] condition of front door switch (driver side) from BCM via CAN
communication.
DOOR SW AS
Indicates [OPEN/CLOSE] condition of front door switch (passenger side) from BCM via
CAN communication.
DOOR SW RR
Indicates [OPEN/CLOSE] condition of rear door switch (RH) from BCM via CAN com-
munication.
DOOR SW RL
Indicates [OPEN/CLOSE] condition of rear door switch (LH) from BCM via CAN com-
munication.
DOOR BK SW
Indicates [OPEN/CLOSE] condition of back door switch from BCM via CAN communi-
cation.
VEHICLE SPEED
Displays the vehicle speed signal received from combination meter by numerical value
[km/h].
Test item
Description
DOOR LOCK/UNLOCK
This test is able to check door lock/unlock operation.
• ALL UNLK: All door lock actuators are unlocked.
• DR UNLK: Door lock actuator (driver side) is unlocked.
• AS UNLK: Door lock actuator (passenger side) is unlocked.
• BK UNLK: This item is indicated, but inactive.
• LOCK: All door lock actuator is locked.
ANTENNA
This test is able to check Intelligent Key antenna operation.
When the following condition are met, hazard warning lamps flash.
• ROOM ANT1: Inside key antenna (console) detects Intelligent Key, when “ROOM
ANT1” is selected.
• ROOM ANT2: Inside key antenna (instrument center/rear seat) detects Intelligent
Key, when “ROOM ANT2”is selected.
• DRIVER ANT: Outside key antenna (driver side) detects Intelligent Key, when “DRIV-
ER ANT” is selected.
• ASSIST ANT: Outside key antenna (passenger side) detects Intelligent Key, when
“ASSIST ANT” is selected.
• BK DOOR ANT: Outside key antenna (rear bumper) detects Intelligent Key, when “BK
DOOR ANT” is selected.
OUTSIDE BUZZER
This test is able to check Intelligent Key warning buzzer operation.
• ON
• OFF
INSIDE BUZZER
This test is able to check warning chime in combination meter operation.
• TAKE OUT: Take away warning chime sounds.
• KNOB: Ignition knob switch warning chime sounds.
• KEY: Key warning chime sounds.
• OFF
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст