Nissan Tiida C11. Instruction — part 1156
REAR SEAT
SE-25
< ON-VEHICLE REPAIR >
C
D
E
F
G
H
I
K
L
M
A
B
SE
N
O
P
60:40 SPLIT FOLD DOWN FIXED SEAT
7.
Armrest
8.
Armrest insert
9.
Outer hinge cover
10. Seatback hinge
11. Inner hinge cover
12. Seatback hinge assembly
13. Seat cushion trim and pad
14. Rear leg base cover
15. Sliding seat frame rail
16. Front leg base cover
17. Seat cushion frame
18. Left seatback frame
19. Left seatback pad and trim
WIIA1231E
SE-26
< ON-VEHICLE REPAIR >
REAR SEAT
Disassembly and Assembly
INFOID:0000000001710914
60:40 SPLIT FOLD DOWN SLIDING SEAT
Disassembly of Armrest
1.
Fold up the backside of the seatback trim and then remove the
armrest nuts.
2.
Push the armrest toward left side while pulling backward to
remove.
3.
Remove the rear seat bushing, and then remove the armrest
hinge cover by pulling it backward.
Assembly of Armrest
Assembly in the reverse order of disassembly.
Disassembly of Seatback Trim and Pad
1.
Remove the headrest.
1.
Seat cushion trim
2.
Seat cushion pad
3.
Seatback side
4.
Armrest
5.
Rear seat bushing
6.
Armrest hinge cover
7.
Headrest
8.
Headrest holder (free)
9.
Headrest holder (locked)
10. Striker cover
11. Seatback trim
12. Seatback pad
13. Rear seatback lock knob
14. Rear seat lock assembly
15. Seatback frame
16. Rear seatback center bracket
17. Rear seatback side bracket
18. Rear seat striker
19. Seat cushion hook
20. Seatbelt guide
PIIB2913J
PIIB2915J
PIIB6507E
REAR SEAT
SE-27
< ON-VEHICLE REPAIR >
C
D
E
F
G
H
I
K
L
M
A
B
SE
N
O
P
2.
Remove the retainer under the back of seatback.
3.
Remove the headrest holder.
4.
To remove armrest, refer to "Disassembly of Armrest " .
5.
Remove the seatback trim.
6.
Remove the seatback pad from the seatback frame.
7.
Remove the seatback center bracket bolt and then remove the seatback frame.
Assembly of Seatback Trim and Pad
Assembly is the reverse order of disassembly. Be careful of the following one point.
• Before installing headrest holder, check its orientation (front/rear and right/left).
Disassembly of Seat Cushion Trim and Pad
Remove the rings to separate the trim and pad.
Assembly of Seat Cushion Trim and Pad
Assembly is the reverse order of disassembly.
Disassembly and Assembly
INFOID:0000000001710917
60:40 SPLIT FOLD DOWN FIXED SEAT
Disassembly of Armrest
1.
Fold down the armrest and remove the armrest bolt cover (A).
PIIB2486J
PIIB4084J
WIIA1384E
SE-28
< ON-VEHICLE REPAIR >
REAR SEAT
2.
Remove the armrest bolt (A).
3.
Push the armrest toward left side while pulling backward to
remove.
4.
Remove the rear seat bushing, and then remove the armrest
hinge cover by pulling it backward.
Assembly of Armrest
Assembly in the reverse order of disassembly.
Disassembly of Seatback Trim and Pad
1.
Remove the headrest.
2.
Remove the retainer under the back of seatback.
WIIA1385E
PIIB2915J
PIIB6507E
PIIB2486J
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст