Nissan Tiida C11. Instruction — part 833
AMBIENT SENSOR
HA-47
< ON-VEHICLE REPAIR >
C
D
E
F
G
H
J
K
L
M
A
B
HA
N
O
P
AMBIENT SENSOR
Removal and Installation of Ambient Sensor - MR18DE, HR16DE and K9K
INFOID:0000000001696506
NOTE:
Vehicles with automatic A/C systems and instruction A/C system with a PTC heater are equipped with a ambient
sensor.
REMOVAL
1.
Remove the front grille. Refer to
EXT-19, "Removal and Installation"
2.
Disconnect the ambient sensor connector (1), and then remove
the ambient sensor (2).
INSTALLATION
Installation is in the reverse order of removal.
ALIIA0209ZZ
HA-48
< ON-VEHICLE REPAIR >
REFRIGERANT PRESSURE SENSOR
REFRIGERANT PRESSURE SENSOR
Removal and Installation of Refrigerant Pressure Sensor - MR18DE, HR16DE
INFOID:0000000001527644
REMOVAL
1.
Use the recovery/recycling equipment to evacuate the refrigerant. Refer to
2.
Disconnect connector, and then remove refrigerant pressure
sensor (1) from condenser (2).
CAUTION:
When working, be careful not to damage the condenser
fins.
INSTALLATION
Installation is in the reverse order of removal.
CAUTION:
• Replace O-rings of refrigerant pressure sensor with a new one, and apply compressor oil when
installing.
• When charging the refrigerant, check for leaks. Refer to
HA-22, "Checking of Refrigerant Leaks"
Removal and Installation of Refrigerant Pressure Sensor - K9K
INFOID:0000000001527628
REMOVAL
1.
Use the recovery/recycling equipment to evacuate the refrigerant. Refer to
2.
Remove the air duct (front).
3.
Remove the radiator core support finisher.
4.
Remove the front grille. Refer to
EXT-19, "Removal and Installation"
5.
Reposition the LH air guide out of the way.
6.
Disconnect the refrigerant pressure sensor connector and
remove the refrigerant pressure sensor (1) from the liquid tank
on the condenser.
CAUTION:
Do not damage the condenser fins.
INSTALLATION
Installation is in the reverse order of removal.
CAUTION:
• Replace the O-ring of the refrigerant pressure sensor with a new one, and apply compressor oil
when installing.
• When charging the refrigerant, check for leaks. Refer to
HA-22, "Checking of Refrigerant Leaks"
SJIA0681E
ALIIA0004ZZ
EXPANSION VALVE
HA-49
< ON-VEHICLE REPAIR >
C
D
E
F
G
H
J
K
L
M
A
B
HA
N
O
P
EXPANSION VALVE
Removal and Installation of Expansion Valve - MR18DE, HR16DE and K9K
INFOID:0000000001527645
REMOVAL
1.
Use the recovery/recycling equipment to evacuate the refrigerant. Refer to
2.
Remove cowl top cover. Refer to
EXT-20, "Removal and Installation"
.
3.
Remove lower dash insulator.
4.
Disconnect low-pressure flexible hose and high-pressure pipe from evaporator. Refer to
.
5.
Remove expansion valve bolts (A), and then remove expansion
valve (1).
CAUTION:
Cap or wrap the joint of the pipe with suitable material such
as vinyl tape to avoid the entry of air.
INSTALLATION
Installation is in the reverse order of removal.
CAUTION:
• Replace O-rings of evaporator with new ones, and apply compressor oil when installing.
• When charging the refrigerant, check for leaks. Refer to
HA-22, "Checking of Refrigerant Leaks"
SJIA0683E
HA-50
< SERVICE DATA AND SPECIFICATIONS (SDS)
SERVICE DATA AND SPECIFICATIONS (SDS)
SERVICE DATA AND SPECIFICATIONS (SDS)
SERVICE DATA AND SPECIFICATIONS (SDS)
MR18DE Engine
INFOID:0000000001396455
Compressor
Oil
Refrigerant
HR16DE Engine
INFOID:0000000001396456
Compressor
Oil
Refrigerant
K9K Engine
INFOID:0000000001396457
Compressor
Model
CR-10
Type
Vanes rotary (5 vanes)
Displacement
cm
3
(in
3
) / revolution
Maximum
96 (5.86)
Direction of rotation
Clockwise (viewed from drive end)
Drive belt
Poly-V Ribbed Belt (6-Groove)
Type
NISSAN A/C System Oil Type R
Capacity
m
(US fl oz, lmp fl oz)
Total in system
120 (4.1, 4.2)
Compressor (service part) charg-
ing amount
Refer to
HA-19, "Maintenance of Oil Quantity in Compressor"
Type
HFC-134a (R-134a)
Capacity
kg (lb)
0.45
±
0.05 (0.99
±
0.11)
Model
CR-10
Type
Vane rotary (5 vanes)
Displacement
cm
3
(in
3
) / revolution
Maximum
96 (5.86)
Direction of rotation
Clockwise (viewed from drive end)
Drive belt
Poly-V Ribbed Belt (7-Groove)
Type
NISSAN A/C System Oil Type R
Capacity
m
(US fl oz, lmp fl oz)
Total in system
120 (4.1, 4.2)
Compressor (service part) charg-
ing amount
Refer to
HA-19, "Maintenance of Oil Quantity in Compressor"
Type
HFC-134a (R-134a)
Capacity
kg (lb)
0.45
±
0.05 (0.99
±
0.11)
Model
XXXXX
Type
Variable displacement swash plate
Displacement
cm
3
(in
3
) / revolution
Maximum
XXX (XXXX)
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст