Nissan Tiida C11. Instruction — part 1373
REPAIR FOR COMPONENT PARTS
TM-543
< DISASSEMBLY AND ASSEMBLY >
[TYPE 2 (4AT: RE4F03B)]
C
E
F
G
H
I
J
K
L
M
A
B
TM
N
O
P
g.
Install bolts (E) from bottom of control valve lower body (1).
Using bolts (E) as guides, install separating plate (2) as a set.
h.
Install support plates (3) on control valve lower body (1).
i.
Install control valve lower body (1) on control valve inter body (2)
using reamer bolts (F) as guides, and tighten reamer bolts (F)
slightly.
2.
Install O-rings on solenoid valves and terminal body.
3.
Install and tighten bolts.
(1): Control valve upper body
(2): Control valve inter body
(3): Control valve lower body
(4): Support plate
SCIA7013E
SCIA7014E
SCIA7180E
SCIA7058E
TM-544
< DISASSEMBLY AND ASSEMBLY >
[TYPE 2 (4AT: RE4F03B)]
REPAIR FOR COMPONENT PARTS
Bolt length, number and location:
*
: Reamer bolt and nut.
a.
Install and tighten bolts (B) to the specified torque.
b.
Install solenoid valve assembly (1) on control valve assembly.
c.
Tighten bolts (A), (C) and (G) to the specified torque.
d.
Remove reamer bolts (F), and then set oil strainer (1) on control
valve assembly
e.
Install and tighten bolts (A), (D), reamer bolts (F) and nuts to the
specified torque.
f.
Tighten bolts (E) to the specified torque.
Bolt symbol
A
B
C
D
E
F
*
G
Bolt length “
” [mm (in)]
13.5
(0.531)
58.0
(2.283)
40.0
(1.575)
66.0
(2.598)
33.0
(1.299)
78.0
(3.071)
18.0
(0.709)
Number of bolts
6
3
6
11
2
2
1
Tightening torque
[N·m (kg-m, in-lb)]
7.84 (0.80, 69)
3.92
(0.40, 35)
7.84 (0.80, 69)
Bolts:
7.84 N·m (0.80 kg-m, 69 in-lb)
ATL0032D
Bolts:
7.84 N·m (0.80 kg-m, 69 in-lb)
SCIA7008E
Nuts and bolts:
7.84 N·m (0.80 kg-m, 69 in-lb)
SCIA7131E
Bolts:
3.92 N·m (0.40 kg-m, 35 in-lb)
ATL0035D
REPAIR FOR COMPONENT PARTS
TM-545
< DISASSEMBLY AND ASSEMBLY >
[TYPE 2 (4AT: RE4F03B)]
C
E
F
G
H
I
J
K
L
M
A
B
TM
N
O
P
Control Valve Upper Body
INFOID:0000000001731438
COMPONENTS
1.
Retainer plate
2.
Plug
3.
Cooler check valve spring
4.
Cooler check valve
5.
Control valve upper body
6.
Pilot valve
7.
Pilot valve spring
8.
Retainer plate
9.
1-2 accumulator retainer plate
SCIA2960J
TM-546
< DISASSEMBLY AND ASSEMBLY >
[TYPE 2 (4AT: RE4F03B)]
REPAIR FOR COMPONENT PARTS
DISASSEMBLY
1.
Remove valves at retainer plates.
CAUTION:
Do not use a magnetic pick-up tool.
a.
Use suitable tool (A) to remove retainer plates (1).
b.
Remove retainer plates (1) while holding spring, plugs (2) or
sleeves using suitable tool (A).
CAUTION:
Remove plugs (2) slowly to prevent internal parts from
jumping out.
10. 1-2 accumulator piston spring
11.
1-2 accumulator piston
12. Plug
13. Retainer plate
14.
Retainer plate
15. Plug
16. 1st reducing valve
17.
1st reducing valve spring
18. Retainer plate
19. 3-2 timing valve spring
20.
3-2 timing valve
21. Retainer plate
22. Plug
23.
Overrun clutch reducing valve
24. Overrun clutch reducing valve spring
25. Retainer plate
26.
Torque converter relief valve spring 27. Torque converter relief valve
28. Retainer plate
29.
Sleeve
30. Plug
31. Torque converter clutch control valve
spring
32.
Torque converter clutch control
valve
33. Retainer plate
34. Plug
35.
1-2 accumulator valve spring
36. 1-2 accumulator valve
SCIA4979E
SCIA7136E
SCIA7137E
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст