Nissan Sentra. Instruction — part 320
DMS-52
< BASIC INSPECTION >
[SPORT MODE (M/T)]
DIAGNOSIS AND REPAIR WORK FLOW
7.
DETECT MALFUNCTIONING PART BY DIAGNOSIS PROCEDURE
Inspect according to Diagnosis Procedure of the system.
Is a malfunctioning part detected?
YES
>> GO TO 8.
NO
>> Check intermittent incident. Refer to
GI-39, "Intermittent Incident"
.
8.
REPAIR OR REPLACE THE MALFUNCTIONING PART
1. Repair or replace the malfunctioning part.
2. Reconnect parts or connectors disconnected during Diagnosis Procedure again after repair and replace-
ment.
3. Check DTC. If DTC is displayed, erase it.
>> GO TO 9.
9.
FINAL CHECK
When DTC was detected in step 3, perform DTC CONFIRMATION PROCEDURE or Component Function
Check again, and then check that the malfunction have been completely repaired.
When symptom was described from the customer, refer to confirmed symptom in step 4 or 5, and check that
the symptom is not detected.
Is DTC detected and does symptom remain?
YES-1 >> DTC is detected: GO TO 7.
YES-2 >> Symptom remains: GO TO 4.
NO
>> Before returning the vehicle to the customer, always erase DTC.
DMS
SPORT MODE SWITCH
DMS-53
< DTC/CIRCUIT DIAGNOSIS >
[SPORT MODE (M/T)]
C
D
E
F
G
H
I
J
K
L
M
B
N
P
A
DTC/CIRCUIT DIAGNOSIS
SPORT MODE SWITCH
Component Function Check
INFOID:0000000009755929
1.
CHECK SPORT MODE SWITCH OPERATION
1. Turn ignition switch ON.
2. Check SPORT mode indicator lamp turns ON/OFF on combination meter when turn SPORT mode switch
ON/OFF.
Is the inspection result normal?
YES
>> GO TO 2.
NO
>> Proceed to
2.
CHECK SPORT MODE SWITCH ILLUMINATION FUNCTION
1. Turn ON the headlamp.
2. Check SPORT mode switch illumination lights up.
Is the inspection result normal?
YES
>> INSPECTION END
NO
>> Proceed to
Diagnosis Procedure
INFOID:0000000009755930
Regarding Wiring Diagram information, refer to
1.
CHECK SPORT MODE SWITCH ILLUMINATION FUNCTION
1. Turn ignition switch ON.
2. Turn ON the headlamp.
3. Check that the SPORT mode switch illumination lights up.
Is the inspection result normal?
YES
>> GO TO 7.
NO
>> GO TO 2.
2.
CHECK SPORT MODE SWITCH ILLUMINATION POWER SUPPLY-1
1. Turn OFF the headlamp.
2. Turn ignition switch OFF.
3. Disconnect SPORT mode switch harness connector.
4. Turn ignition switch ON.
5. Turn ON the headlamp.
6. Check the voltage between SPORT mode switch harness connector terminals.
Is the inspection result normal?
YES
>> Check intermittent incident. Refer to
GI-39, "Intermittent Incident"
. If OK, replace SPORT mode
switch. Refer to
DMS-58, "Removal and Installation"
NO
>> GO TO 3.
3.
CHECK SPORT MODE SWITCH ILLUMINATION POWER SUPPLY-2
Check the voltage between SPORT mode switch harness connector and ground.
SPORT mode switch
Voltage
Connector
+
-
Terminal
M81
1
4
Battery voltage
DMS-54
< DTC/CIRCUIT DIAGNOSIS >
[SPORT MODE (M/T)]
SPORT MODE SWITCH
Is the inspection result normal?
YES
>> GO TO 6.
NO
>> GO TO 4.
4.
CHECK FUSE
1. Turn OFF the headlamp.
2. Turn ignition switch OFF.
3. Pull out #37 fuse. Refer to
4. Check that the fuse is not fusing.
Is the inspection result normal?
YES
>> GO TO 5.
NO
>> Replace the fuse after repair the applicable circuit.
5.
CHECK SPORT MODE SWITCH ILLUMINATION POWER SUPPLY CIRCUIT
1. Disconnect IPDM E/R harness connector E45. Refer to
2. Check the continuity between IPDM E/R harness connector and SPORT mode switch harness connector.
3. Also check harness for short to ground.
Is the inspection result normal?
YES
>> Perform IPDM E/R auto active test and check tail lamp relay operation. Refer to
(with intelligent key),
PCS-37, "Diagnosis Description"
(without intelligent key).
NO
>> Repair or replace error-detected parts.
6.
CHECK GROUND CIRCUIT
1. Turn OFF the headlamp.
2. Turn ignition switch OFF.
3. Check continuity between SPORT mode switch harness connector terminal and ground.
Is the inspection result normal?
YES
>> Check intermittent incident. Refer to
GI-39, "Intermittent Incident"
.
NO
>> Repair or replace error-detected parts.
7.
CHECK SPORT MODE SWITCH CIRCUIT
1. Turn OFF the headlamp.
2. Turn ignition switch OFF.
3. Disconnect SPORT mode switch harness connector.
4. Turn ignition switch ON.
5. Check voltage between SPORT mode switch harness connector terminals.
+
—
Voltage
SPORT mode switch
Connector
Terminal
M81
1
Ground
Battery voltage
+
−
Continuity
IPDM E/R
SPORT mode switch
Connector
Terminal
Connector
Terminal
E45
33
M81
1
Existed
+
−
Continuity
SPORT mode switch
Connector
Terminal
M81
4
Ground
Existed
DMS
SPORT MODE SWITCH
DMS-55
< DTC/CIRCUIT DIAGNOSIS >
[SPORT MODE (M/T)]
C
D
E
F
G
H
I
J
K
L
M
B
N
P
A
Is the inspection result normal?
YES
>> GO TO 11.
NO
>> GO TO 8.
8.
CHECK GROUND CIRCUIT
1. Turn ignition switch OFF.
2. Check the continuity between SPORT mode switch harness connector and ground.
Is the inspection result normal?
YES
>> GO TO 9.
NO
>> Repair or replace damaged parts.
9.
CHECK CIRCUIT BETWEEN COMBINATION METER AND SPORT MODE SWITCH-1
1. Disconnect combination meter harness connector M38.
2. Check continuity between combination meter harness connector terminal and SPORT mode switch har-
ness connector terminal.
3. Also check harness for short to power and short to ground.
Is the inspection result normal?
YES
>> GO TO 10.
NO
>> Repair or replace damaged parts.
10.
CHECK COMBINATION METER INPUT/OUTPUT SIGNAL
1. Connect all of disconnected connectors.
2. Check input/output signal of combination meter. Refer to
Is the inspection result normal?
YES
>> Check intermittent incident. Refer to
GI-39, "Intermittent Incident"
.
NO
>> Repair or replace error detected parts.
11.
CHECK SPORT MODE SWITCH
Check SPORT mode switch. Refer to
DMS-55, "Component Inspection"
Is the inspection result normal?
YES
>> Check intermittent incident. Refer to
GI-39, "Intermittent Incident"
.
NO
>> Replace SPORT mode switch. Refer to
DMS-58, "Removal and Installation"
Component Inspection
INFOID:0000000009755931
1.
CHECK SPORT MODE SWITCH
Check continuity between SPORT mode switch connector terminals.
SPORT mode switch
Voltage (Ap-
prox.)
Connector
+
-
Terminal
M81
6
8
5 V
+
−
Continuity
SPORT mode switch
Connector
Terminal
M81
8
Ground
Existed
+
−
Continuity
Combination meter
SPORT mode switch
Connector
Terminal
Connector
Terminal
M24
39
M81
6
Existed
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст