Nissan Quest E52. Instruction — part 973
PWC-4
Description . . . . . . . . . . . . . . . ..
Work Procedure . . . . . . . . . . . . . ..
CHECK ANTI-PINCH FUNCTION . . . . . .
Description . . . . . . . . . . . . . . . ..
Work Procedure . . . . . . . . . . . . . ..
DTC/CIRCUIT DIAGNOSIS . . . . . . .
POWER SUPPLY AND GROUND CIRCUIT . .
POWER WINDOW MAIN SWITCH . . . . . . ...
POWER WINDOW MAIN SWITCH : Diagnosis
Procedure . . . . . . . . . . . . . . . ...
FRONT POWER WINDOW SWITCH (PASSEN-
GER SIDE) . . . . . . . . . . . . . . . ....
FRONT POWER WINDOW SWITCH (PASSEN-
GER SIDE) : Diagnosis Procedure . . . . . . .
SLIDING DOOR POWER WINDOW SWITCH . . ..
SLIDING DOOR POWER WINDOW SWITCH :
Diagnosis Procedure . . . . . . . . . . . ..
FRONT POWER WINDOW SWITCH (PAS-
SENGER SIDE) . . . . . . . . . . . . ..
Component Function Check . . . . . . . . ...
Diagnosis Procedure . . . . . . . . . . . ..
Component Inspection . . . . . . . . . . ...
SLIDING DOOR POWER WINDOW SWITCH .
Component Function Check . . . . . . . . ..
Diagnosis Procedure . . . . . . . . . . . .
Component Inspection . . . . . . . . . . ...
POWER WINDOW MOTOR . . . . . . . .
DRIVER SIDE . . . . . . . . . . . . . . ...
DRIVER SIDE : Component Function Check . .
DRIVER SIDE : Diagnosis Procedure . . . . ...
PASSENGER SIDE . . . . . . . . . . . . ..
PASSENGER SIDE : Component Function Check
..
PASSENGER SIDE : Diagnosis Procedure . . ..
SLIDING DOOR LH . . . . . . . . . . . . ..
SLIDING DOOR LH : Component Function Check ..
SLIDING DOOR LH : Diagnosis Procedure . . ...
SLIDING DOOR RH . . . . . . . . . . . . .
SLIDING DOOR RH : Component Function Check
..
SLIDING DOOR RH : Diagnosis Procedure . . ..
ENCODER CIRCUIT . . . . . . . . . .
Component Function Check . . . . . . . . ..
Diagnosis Procedure . . . . . . . . . . . .
SYMPTOM DIAGNOSIS . . . . . . .
NONE OF THE POWER WINDOWS CAN BE
OPERATED USING ANY SWITCH . . . . .
Diagnosis Procedure . . . . . . . . . . . .
DRIVER SIDE POWER WINDOW DOES NOT
OPERATE . . . . . . . . . . . . . . .
Diagnosis Procedure . . . . . . . . . . . .
FRONT PASSENGER SIDE POWER WIN-
DOW DOES NOT OPERATE . . . . . . ...
WHEN FRONT POWER WINDOW SWITCH (PAS-
SENGER SIDE) IS OPERATED . . . . . . . ..
WHEN POWER WINDOW MAIN SWITCH IS OP-
ERATED . . . . . . . . . . . . . . . . ..
WHEN POWER WINDOW MAIN SWITCH IS OP-
ERATED : Diagnosis Procedure . . . . . . ...
SLIDING DOOR LH POWER WINDOW DOES
NOT OPERATE . . . . . . . . . . . .
WHEN SLIDING DOOR LH POWER WINDOW
SWITCH IS OPERATED . . . . . . . . . . .
WHEN SLIDING DOOR LH POWER WINDOW
SWITCH IS OPERATED : Diagnosis Procedure ..
WHEN POWER WINDOW MAIN SWITCH IS OP-
ERATED . . . . . . . . . . . . . . . . ..
WHEN POWER WINDOW MAIN SWITCH IS OP-
ERATED : Diagnosis Procedure . . . . . . ...
SLIDING DOOR RH POWER WINDOW DOES
NOT OPERATE . . . . . . . . . . . .
WHEN SLIDING DOOR RH POWER WINDOW
SWITCH IS OPERATED . . . . . . . . . . .
WHEN SLIDING DOOR RH POWER WINDOW
SWITCH IS OPERATED : Diagnosis Procedure ..
PWC-5
C
D
E
F
G
H
I
J
L
M
A
B
PWC
N
O
P
WHEN POWER WINDOW MAIN SWITCH IS OP-
ERATED . . . . . . . . . . . . . . . . ..
WHEN POWER WINDOW MAIN SWITCH IS OP-
ERATED : Diagnosis Procedure . . . . . . ...
AUTO OPERATION DOES NOT OPERATE
BUT MANUAL OPERATE NORMALLY
(DRIVER SIDE) . . . . . . . . . . . . .
Diagnosis Procedure . . . . . . . . . . . .
ANTI-PINCH SYSTEM DOES NOT OPERATE
NORMALLY (DRIVER SIDE) . . . . . . ...
Diagnosis Procedure . . . . . . . . . . . .
POWER WINDOW RETAINED POWER OP-
ERATION DOES NOT OPERATE PROPERLY
..
Diagnosis Procedure . . . . . . . . . . . .
POWER WINDOW LOCK SWITCH DOES
NOT FUNCTION . . . . . . . . . . . ...
Diagnosis Procedure . . . . . . . . . . . .
POWER WINDOW SWITCH ILLUMINATION
DOES NOT ILLUMINATE . . . . . . . ...
DRIVER SIDE . . . . . . . . . . . . . . ...
DRIVER SIDE : Diagnosis Procedure . . . . ...
PASSENGER SIDE . . . . . . . . . . . . ..
PASSENGER SIDE : Diagnosis Procedure . . ..
SLIDING DOOR LH . . . . . . . . . . . . .
SLIDING DOOR LH : Diagnosis Procedure . . ..
SLIDING DOOR RH . . . . . . . . . . . . .
SLIDING DOOR RH : Diagnosis Procedure . . ..
REMOVAL AND INSTALLATION . . . .
POWER WINDOW MAIN SWITCH . . . . .
Removal and Installation . . . . . . . . . ...
SLIDING DOOR POWER WINDOW SWITCH .
PWC-6
< PRECAUTION >
[FRONT WINDOW ANTI-PINCH]
PRECAUTIONS
PRECAUTION
PRECAUTIONS
Precaution for Supplemental Restraint System (SRS) "AIR BAG" and "SEAT BELT
PRE-TENSIONER"
INFOID:0000000009653271
The Supplemental Restraint System such as “AIR BAG” and “SEAT BELT PRE-TENSIONER”, used along
with a front seat belt, helps to reduce the risk or severity of injury to the driver and front passenger for certain
types of collision. This system includes seat belt switch inputs and dual stage front air bag modules. The SRS
system uses the seat belt switches to determine the front air bag deployment, and may only deploy one front
air bag, depending on the severity of a collision and whether the front occupants are belted or unbelted.
Information necessary to service the system safely is included in the “SRS AIR BAG” and “SEAT BELT” of this
Instruction.
WARNING:
Always observe the following items for preventing accidental activation.
• To avoid rendering the SRS inoperative, which could increase the risk of personal injury or death in
the event of a collision that would result in air bag inflation, all maintenance must be performed by
an authorized NISSAN/INFINITI dealer.
• Improper maintenance, including incorrect removal and installation of the SRS, can lead to personal
injury caused by unintentional activation of the system. For removal of Spiral Cable and Air Bag
Module, see “SRS AIR BAG”.
• Never use electrical test equipment on any circuit related to the SRS unless instructed to in this Ser-
vice Instruction. SRS wiring harnesses can be identified by yellow and/or orange harnesses or harness
connectors.
PRECAUTIONS WHEN USING POWER TOOLS (AIR OR ELECTRIC) AND HAMMERS
WARNING:
Always observe the following items for preventing accidental activation.
• When working near the Air Bag Diagnosis Sensor Unit or other Air Bag System sensors with the
ignition ON or engine running, never use air or electric power tools or strike near the sensor(s) with
a hammer. Heavy vibration could activate the sensor(s) and deploy the air bag(s), possibly causing
serious injury.
• When using air or electric power tools or hammers, always switch the ignition OFF, disconnect the
battery, and wait at least 3 minutes before performing any service.
Precautions for Removing Battery Terminal
INFOID:0000000009962075
• When removing the 12V battery terminal, turn OFF the ignition
switch and wait at least 30 seconds.
NOTE:
ECU may be active for several tens of seconds after the ignition
switch is turned OFF. If the battery terminal is removed before ECU
stops, then a DTC detection error or ECU data corruption may
occur.
• For vehicles with the 2-batteries, be sure to connect the main bat-
tery and the sub battery before turning ON the ignition switch.
NOTE:
If the ignition switch is turned ON with any one of the terminals of
main battery and sub battery disconnected, then DTC may be
detected.
• After installing the 12V battery, always check "Self Diagnosis Result" of all ECUs and erase DTC.
NOTE:
The removal of 12V battery may cause a DTC detection error.
SEF289H
COMPONENT PARTS
PWC-7
< SYSTEM DESCRIPTION >
[FRONT WINDOW ANTI-PINCH]
C
D
E
F
G
H
I
J
L
M
A
B
PWC
N
O
P
SYSTEM DESCRIPTION
COMPONENT PARTS
Component Parts Location
INFOID:0000000009653272
A.
View with front door finisher removed B.
View with sliding door finisher re-
moved
No.
Component
Function
1.
BCM
• Supplies power supply to power window switch.
• Controls retained power.
• Receives key ID signal from remote keyless entry receiver.
Refer to
BCS-4, "BODY CONTROL SYSTEM : Component Parts Location"
for detailed installation location.
2.
Power window main switch
PWC-8, "Power Window Main Switch"
3.
Front power window motor (driver side)
PWC-8, "Front Power Window Motor (Driver Side)"
JMKIA8162GB
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст