Nissan Quest E52. Instruction — part 908
MWI
DIAGNOSIS SYSTEM (COMBINATION METER)
MWI-37
< SYSTEM DESCRIPTION >
C
D
E
F
G
H
I
J
K
L
M
B
A
O
P
O/D OFF IND
[On/Off]
Status of O/D OFF indicator detected from O/D OFF indicator signal is received
from CVT shift selector.
4WD W/L
[Off]
This item is displayed, but cannot be monitored.
4WD LOCK IND
[Off]
This item is displayed, but cannot be monitored.
FUEL W/L
[On/Off]
Low fuel warning status detected by the identified fuel level.
WASHER W/L
[On/Off]
Status of low washer fluid warning judged from washer level switch input to com-
bination meter.
AIR PRES W/L
[On/Off]
Status of low tire pressure warning lamp judged from TPMS malfunction warning
lamp signal received from BCM with CAN communication line.
KEY G/Y W/L
[On/Off]
Status of Intelligent Key system malfunction detected from Intelligent Key warning
display signal is received from BCM via CAN communication.
EPS W/L
[On/Off]
Status of EPS warning lamp judged from EPS warning lamp signal received from
EPS control unit with CAN communication line.
AFS OFF IND
[Off]
This item is displayed, but cannot be monitored.
ECO MODE IND
[Off]
This item is displayed, but cannot be monitored.
LCD
[B&P N, B&P I, ID NG, ROTAT, SFT
P, INSRT, BATT, NO KY, OUTKY, LK
WN, KY>PSW, Off]
Displays status of Intelligent Key system warning judged from meter display signal
received from BCM with CAN communication line.
ACC TARGET
[Off]
This item is displayed, but cannot be monitored.
ACC DISTANCE
[Off]
This item is displayed, but cannot be monitored.
ACC OWN VHL
[Off]
This item is displayed, but cannot be monitored.
ACC SET SPEED
[Off]
This item is displayed, but cannot be monitored.
ACC UNIT
[Off]
This item is displayed, but cannot be monitored.
SHIFT IND
[P, R, N, D, L]
Status of shift position indicator judged from shift position signal received from
TCM with CAN communication line.
BSW IND
[Off]
This item is displayed, but cannot be monitored.
BSW W/L
[On/Off]
Status of BSW warning lamp judged from BSW warning lamp signal received from
camera control unit via CAN communication.
FUEL CAP W/L
[On/Off]
Status of fuel filler cap warning detected from fuel filler cap warning display signal
is received from ECM via CAN communication.
O/D OFF SW
[On/Off]
Status of overdrive control switch.
M RANGE SW
[Off]
This item is displayed, but cannot be monitored.
NM RANGE SW
[Off]
This item is displayed, but cannot be monitored.
AT SFT UP SW
[Off]
This item is displayed, but cannot be monitored.
AT SFT DWN SW
[Off]
This item is displayed, but cannot be monitored.
Display item [Unit]
MAIN
SIGNALS
Description
MWI-38
< SYSTEM DESCRIPTION >
DIAGNOSIS SYSTEM (COMBINATION METER)
NOTE:
Some items are not available according to vehicle specification.
Warning History
• Stores histories when warning/indicator lamp is turned on.
• “Warning History” indicates the “TIME” when the warning/indicator lamp is turned on.
• The “TIME” above is:
- 0: The condition that the warning/indicator lamp has been turned on 1 or more times after starting the engine
and waiting for 30 seconds.
- 1 - 39: The number of times the engine was restarted after the 0 condition.
- NO Warning History: Stores NO (0) turning on history of warning/indicator lamp.
NOTE:
• Warning History is not stored for approximately 30 seconds after the engine starts.
• Brake warning lamp does not store any history when the parking brake is applied or the brake fluid level gets
low.
Display Item
COMP F/B SIG
[On/Off]
A/C compressor activation condition that ECM judges according to the water tem-
perature and the acceleration degree.
PKB SW
[On/Off]
Status of parking brake switch.
BUCKLE SW
[On/Off]
Status of seat belt buckle switch (driver side).
BRAKE OIL SW
[On/Off]
Status of brake fluid level switch.
A/C AMP CONN
[On/Off]
Status of A/C auto amp. connection recognition signal.
ENTER SW
[On/Off]
Status of
(ENTER) switch.
SELECT SW
[On/Off]
Status of
(SELECT) switch.
ECO MODE SW
[Off]
This item is displayed, but cannot be monitored.
DISTANCE
[km]
Value of distance to empty calculated by combination meter.
OUTSIDE TEMP
[
°
C or
°
F]
Ambient temperature value converted from ambient sensor signal received from
ambient sensor.
NOTE:
This may not match with the temperature value indicated on the information dis-
play. (Because the information display value is a corrected value from the ambient
sensor input value.)
FUEL LOW SIG
[On/Off]
Status of fuel level low warning signal to output to AV control unit via CAN com-
munication.
BUZZER
[On/Off]
X
Buzzer status (in the combination meter) is detected from the buzzer output signal
received from each unit via CAN communication and the warning output condition
of the combination meter.
TPMS PRESS L
[On/Off]
Status of low tire pressure warning judged from low tire pressure warning lamp
signal received from BCM with CAN communication line.
4WD AUTO IND
[Off]
This item is displayed, but cannot be monitored.
Display item [Unit]
MAIN
SIGNALS
Description
Display item
Description
ABS W/L
Lighting history of ABS warning lamp.
VDC/TCS IND
Lighting history of VDC OFF indicator lamp.
SLIP IND
Lighting history of VDC warning lamp.
MWI
DIAGNOSIS SYSTEM (COMBINATION METER)
MWI-39
< SYSTEM DESCRIPTION >
C
D
E
F
G
H
I
J
K
L
M
B
A
O
P
NOTE:
In items displayed on the CONSULT screen, only those listed in the above table are used.
BRAKE W/L
Lighting history of brake warning lamp.
DOOR W/L
Lighting history of door open warning.
OIL W/L
Lighting history of oil pressure warning lamp.
C-ENG W/L
Lighting history of malfunction indicator lamp.
CRUISE IND
Lighting history of CRUISE indicator.
O/D OFF IND
Lighting history of O/D OFF indicator lamp.
FUEL W/L
Lighting history of low fuel level warning.
WASHER W/L
Lighting history of low washer fluid warning.
AIR PRES W/L
Lighting history of low tire pressure warning lamp.
KEY G/Y W/L
Lighting history of Intelligent Key system malfunction.
EPS W/L
Lighting history of EPS warning lamp.
BSW W/L
Lighting history of BSW warning lamp.
Display item
Description
MWI-40
< ECU DIAGNOSIS INFORMATION >
COMBINATION METER
ECU DIAGNOSIS INFORMATION
COMBINATION METER
Reference Value
INFOID:0000000009651485
VALUES ON THE DIAGNOSIS TOOL
NOTE:
The following table includes information (items) inapplicable to this vehicle. For information (items) applicable
to this vehicle, refer to CONSULT display items.
Monitor Item
Condition
Value/Status
SPEED METER
[km/h]
Ignition switch
ON
While driving
Input value of vehicle speed signal
(CAN communication signal)
NOTE:
655.35 is displayed when the malfunc-
tion signal is received
SPEED OUTPUT
[km/h]
Ignition switch
ON
While driving
Output value of vehicle speed signal
(CAN communication signal)
NOTE:
655.35 is displayed when the malfunc-
tion signal is received
ODO OUTPUT
[km/h or mph]
Ignition switch
ON
—
Output value of odometer signal (CAN
communication signal)
TACHO METER
[rpm]
Ignition switch
ON
Engine running
Input value of engine speed signal
(CAN communication signal)
NOTE:
8191.875 is displayed when the mal-
function signal is received
FUEL METER
[L]
Ignition switch
ON
—
Input value of fuel level sensor signal
W TEMP METER
[
°
C]
Ignition switch
ON
—
Input value of engine coolant tempera-
ture signal (CAN communication sig-
nal)
NOTE:
215 is displayed when the malfunction
signal is input
ABS W/L
Ignition switch
ON
ABS warning lamp ON
On
ABS warning lamp OFF
Off
VDC/TCS IND
Ignition switch
ON
VDC OFF indicator lamp ON
On
VDC OFF indicator lamp OFF
Off
SLIP IND
Ignition switch
ON
VDC warning lamp ON
On
VDC warning lamp OFF
Off
BRAKE W/L
Ignition switch
ON
Brake warning lamp ON
On
Brake warning lamp OFF
Off
DOOR W/L
Ignition switch
ON
Door open warning ON
On
Door open warning OFF
Off
HI-BEAM IND
Ignition switch
ON
High-beam indicator lamp ON
On
High-beam indicator lamp OFF
Off
TURN IND
Ignition switch
ON
Turn signal indicator lamp ON
On
Turn signal indicator lamp OFF
Off
LIGHT IND
Ignition switch
ON
Position lamp indicator lamp ON
On
Position lamp indicator lamp OFF
Off
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст