Nissan Quest E52. Instruction — part 429
DLK-430
< REMOVAL AND INSTALLATION >
FRONT FENDER
FRONT FENDER
Exploded View
INFOID:0000000009649427
FRONT FENDER
FRONT FENDER : Removal and Installation
INFOID:0000000009649428
CAUTION:
Use a shop cloth to protect the body from being damaged during removal and installation.
REMOVAL
1.
Remove front fender cover. Refer to
2.
Remove hood side cover. Refer to
DLK-431, "HOOD SIDE COVER : Removal and Installation"
3.
Remove front bumper fascia and bumper side bracket. Refer to
EXT-12, "Removal and Installation"
.
4.
Remove front combination lamp. Refer to
EXL-104, "Removal and Installation"
(XENON TYPE) or
214, "Removal and Installation"
(HALOGEN TYPE).
5.
Remove fender protect molding. Refer to
EXT-24, "FENDER PROTECT MOLDING : Removal and Instal-
.
6.
Remove fender protector (front and rear). Refer to
EXT-23, "Removal and Installation"
7.
Remove front fender spacer and front fender baffle.
8.
Remove mounting bolts of front fender assembly.
9.
Remove front fender stiffener (2) from the vehicle body while
carefully pulling upper portion of front fender (1) toward vehicle
outside.
1.
Hood side cover
2.
Front fender spacer
3.
Front fender stay
4.
Front fender assembly
5.
Front fender baffle
6.
Front fender stiffener
: Clip
: Vehicle front
JMKIA8254ZZ
: Vehicle front
JMKIA5633ZZ
FRONT FENDER
DLK-431
< REMOVAL AND INSTALLATION >
C
D
E
F
G
H
I
J
L
M
A
B
DLK
N
O
P
10. Move front fender (1) toward vehicle front, and then disengage
clip (2).
CAUTION:
Apply protective tape (A) on the hood and front fender to
protect the painted surface from damage.
11. Remove front fender assembly.
INSTALLATION
Note the following items, and then install in the reverse order of removal.
CAUTION:
• After installation, apply the touch-up paint (the body color) onto the head of front fender mounting
bolts.
• After installation, adjust the following part.
- Hood assembly: Refer to
DLK-425, "HOOD ASSEMBLY : Adjustment"
.
- Front door: Refer to
DLK-434, "DOOR ASSEMBLY : Adjustment"
.
HOOD SIDE COVER
HOOD SIDE COVER : Removal and Installation
INFOID:0000000009649429
REMOVAL
1.
Disconnect end of hood side cover from front combination lamp.
2.
Remove fixing clips, and then remove hood side cover.
INSTALLATION
Install in the reverse order of removal.
: Clip
JMKIA6332ZZ
DLK-432
< REMOVAL AND INSTALLATION >
FRONT DOOR
FRONT DOOR
Exploded View
INFOID:0000000009649430
DOOR ASSEMBLY
DOOR ASSEMBLY : Removal and Installation
INFOID:0000000009649431
WARNING:
Before servicing, turn ignition switch OFF, disconnect battery negative terminal and wait 3 minutes or
more.
CAUTION:
• Perform work with 2 workers, because of its heavy weight.
• When removing and installing front door assembly, support door with a jack and shop cloth to pro-
tect door and body.
REMOVAL
1.
Remove front door protect molding. Refer to
EXT-25, "FRONT DOOR PROTECT MOLDING : Removal
1.
Front door panel
2.
TORX bolt
3.
Door striker
4.
Front door sash inner cover
5.
Grommet
6.
Bumper rubber
7.
Hole cover
8.
Door check link
9.
Door hinge (lower)
10. Door hinge (upper)
: Always replace after every disassembly.
: N·m (kg-m, in-lb)
: N·m (kg-m, ft-lb)
: Body grease
JMKIA8255GB
FRONT DOOR
DLK-433
< REMOVAL AND INSTALLATION >
C
D
E
F
G
H
I
J
L
M
A
B
DLK
N
O
P
2.
Disconnect front door harness connector.
3.
Remove mounting bolt of door check link on the vehicle.
4.
Remove door hinge mounting nuts (door side), and then remove door assembly.
INSTALLATION
Note the following items, and then install in the reverse order of removal.
CAUTION:
• Apply anticorrosive agent onto the mounting surface.
• Check front door open/close, lock/unlock operation after installation.
• After installation, perform the fitting adjustment. Refer to
DLK-434, "DOOR ASSEMBLY : Adjust-
• After installation, apply touch-up paint (the body color) onto the head of door hinge mounting nuts.
• Check door hinge rotating part for poor lubrication. If necessary, apply body grease.
• If malfunction is detected by the air bag warning lamp, after repair or replacement of the malfunc-
tioning parts, reset the memory using self-diagnosis or CONSULT. Refer to
.
• After the work is completed, check that no system malfunction is detected by air bag warning lamp.
JMKIA8256ZZ
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст