Nissan Quest E52. Instruction — part 444
DLK-490
< REMOVAL AND INSTALLATION >
OUTSIDE KEY ANTENNA
OUTSIDE KEY ANTENNA
DRIVER SIDE
DRIVER SIDE : Removal and Installation
INFOID:0000000009649502
REMOVAL
Remove the driver side outside handle. Refer to
DLK-464, "OUTSIDE HANDLE : Removal and Installation"
.
INSTALLATION
Install in the reverse order of removal.
PASSENGER SIDE
PASSENGER SIDE : Removal and Installation
INFOID:0000000009649503
REMOVAL
Remove the passenger side outside handle. Refer to
DLK-464, "OUTSIDE HANDLE : Removal and Installa-
.
INSTALLATION
Install in the reverse order of removal.
REAR BUMPER
REAR BUMPER : Removal and Installation
INFOID:0000000009649504
REMOVAL
1.
Remove the rear bumper fascia. Refer to
EXT-16, "REAR BUMPER : Removal and Installation"
.
2.
Remove the outside key antenna (rear bumper) mounting clip
(A), then remove outside key antenna (rear bumper) (1).
INSTALLATION
Install in the reverse order of removal.
JMKIA6043ZZ
INTELLIGENT KEY WARNING BUZZER
DLK-491
< REMOVAL AND INSTALLATION >
C
D
E
F
G
H
I
J
L
M
A
B
DLK
N
O
P
INTELLIGENT KEY WARNING BUZZER
Removal and Installation
INFOID:0000000009649505
REMOVAL
1.
Remove the front bumper fascia. Refer to
EXT-12, "Removal and Installation"
.
2.
Remove the Intelligent Key warning buzzer mounting bolt (A),
and then remove the Intelligent Key warning buzzer (1).
INSTALLATION
Install in the reverse order of removal.
JMKIA6339ZZ
DLK-492
< REMOVAL AND INSTALLATION >
REMOTE KEYLESS ENTRY RECEIVER
REMOTE KEYLESS ENTRY RECEIVER
Removal and Installation
INFOID:0000000009649506
REMOVAL
1.
Remove the glove box lid. Refer to
IP-14, "Removal and Installation"
2.
Remove the remote keyless entry receiver mounting bolt (A),
and then remote keyless entry receiver (1).
INSTALLATION
Install in the reverse order of removal.
JMKIA6338ZZ
INTELLIGENT KEY BATTERY
DLK-493
< REMOVAL AND INSTALLATION >
C
D
E
F
G
H
I
J
L
M
A
B
DLK
N
O
P
INTELLIGENT KEY BATTERY
Removal and Installation
INFOID:0000000009649507
1.
Release the lock knob at the back of the Intelligent Key and remove the mechanical key.
2.
Insert a remover tool (A) wrapped with a cloth into the slit of the
corner and twist it to separate the upper part from the lower part.
CAUTION:
• Do not touch the circuit board or battery terminal.
• The key fob is water-resistant. However, if it does get wet,
immediately wipe it dry.
3.
Replace the battery with new one.
4.
Align the tips of the upper and lower parts, and then push them
together until it is securely closed.
CAUTION:
• When replacing battery, keep dirt, grease, and other for-
eign materials off the electrode contact area.
• After replacing the battery, check that all Intelligent Key
functions work normally.
PIIB6221E
Battery replacement
:Coin-type lithium battery
(CR2025)
PIIB6222E
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст