Nissan Quest E52. Instruction — part 807
BODY SIDE TRIM
INT-27
< REMOVAL AND INSTALLATION >
C
D
E
F
G
H
I
K
L
M
A
B
INT
N
O
P
REAR PILLAR GARNISH : Removal and Installation
INFOID:0000000009650288
CAUTION:
• When removing, always use a remover tool that is made of plastic to prevent damage to the parts.
• Never damage the body.
• When removing, be careful not to damage or drop fixing clips on the side window side.
REMOVAL
1.
Remove luggage side lower finisher. Refer to
INT-43, "LUGGAGE SIDE LOWER FINISHER : Removal
2.
Remove second seat belt shoulder anchor. Refer to
SB-11, "SEAT BELT RETRACTOR : Removal and
.
3.
Remove rear pillar garnish cap.
disengage rear pillar garnish cap fixing pawl using a remover
tool (A), and then remove rear pillar garnish cap.
CAUTION:
Apply protective tape (B) on the part to protect it from dam-
age.
4.
Remove rear pillar garnish fixing bolt.
5.
Remove rear pillar garnish.
Disengage rear pillar garnish fixing clips and pawls using a
remover tool (A), and then remove rear pillar garnish.
INSTALLATION
Note the following items, and install in the reverse order of removal.
CAUTION:
• When installing, check in advance that clips are accurately aligned with the holes on body panel
side, and then install by pressing in.
• When installing, be careful not to damage or drop clips on the side window side.
BACK PILLAR GARNISH
BACK PILLAR GARNISH : Removal and Installation
INFOID:0000000009650289
CAUTION:
• When removing, always use a remover tool that is made of plastic to prevent damage to the parts.
• Never damage the body.
• Be careful not to bend headlining.
• Be careful not to damage or drop fixing clips on the side window side.
REMOVAL
1.
Remove luggage side lower finisher. Refer to
INT-43, "LUGGAGE SIDE LOWER FINISHER : Removal
: Pawl
JMJIA4859ZZ
: Clip
: Pawl
JMJIA4860ZZ
INT-28
< REMOVAL AND INSTALLATION >
BODY SIDE TRIM
2.
Remove back door support rod. (with auto back door) Refer to
DLK-477, "BACK DOOR SUPPORT ROD :
.
3.
Remove third seat belt shoulder anchor. Refer to
SB-16, "SEAT BELT RETRACTOR : Removal and
.
4.
Remove back pillar garnish.
a.
Disengage back pillar garnish fixing clips using a remover tool
(A).
b.
Disengage back pillar garnish fixing pawls using a remover tool
(A).
CAUTION:
Apply protective tape (B) on the part to protect it from dam-
age.
c.
Disengage back pillar garnish fixing metal clip using a remover
tool (A), and then remove back pillar garnish.
CAUTION:
Be careful not to deform headlining when removing
because headlining is inserted into groove of back pillar
garnish.
INSTALLATION
Note the following items, and install in the reverse order of removal.
CAUTION:
• When installing, check in advance that clips and metal clip are accurately aligned with the holes on
body panel side, and then install by pressing in.
• When installing, be careful not to damage or drop clips on the side window side.
ROOF SIDE GARNISH
ROOF SIDE GARNISH : Removal and Installation
INFOID:0000000009650290
CAUTION:
• When removing, always use a remover tool that is made of plastic to prevent damage to the parts.
• Never damage the body.
• Be careful not to damage roof side garnish when removing because roof side garnish is damaged
easily.
• Be careful not to bend headlining.
REMOVAL
1.
Remove rear pillar garnish. Refer to
INT-27, "REAR PILLAR GARNISH : Removal and Installation"
: Clip
JMJIA4861ZZ
: Pawl
JMJIA4862ZZ
: Metal clip
JMJIA4863ZZ
BODY SIDE TRIM
INT-29
< REMOVAL AND INSTALLATION >
C
D
E
F
G
H
I
K
L
M
A
B
INT
N
O
P
2.
Remove back pillar garnish. Refer to
INT-27, "BACK PILLAR GARNISH : Removal and Installation"
.
3.
Remove shade hook. (with sunshade)
a.
Remove hook pin using a remover tool (A).
CAUTION:
Apply protective tape (B) on the part to protect it from dam-
age.
b.
Pull toward vehicle lower, disengage shade hook fixing pawl,
and then remove.
4.
Remove roof side garnish.
a.
Disengage roof side garnish fixing metal clips using a remover
tool (A)
b.
Lower roof side garnish from the vehicle body outside to
remove.
CAUTION:
Be careful not to deform headlining when removing,
because headlining is inserted into groove of roof side gar-
nish.
INSTALLATION
Note the following item, and install in the reverse order of removal.
CAUTION:
When installing, check in advance that metal clips are accurately aligned with the holes on body panel
side, and then install by pressing in.
: Pawl
JMJIA4864ZZ
: Metal clip
JMJIA4865ZZ
INT-30
< REMOVAL AND INSTALLATION >
FLOOR TRIM
FLOOR TRIM
Exploded View
INFOID:0000000009650291
FRONT FLOOR CARPET
FRONT FLOOR CARPET : Removal and Installation
INFOID:0000000009650292
CAUTION:
• When removing, always use a remover tool that is made of plastic to prevent damage to the parts.
• Never damage the body.
REMOVAL
1.
Rear floor carpet
2.
Harness clip
3.
Front carpet
4.
Carpet hook
5.
Front floor pad RH
6.
Front floor pad LH
7.
Front floor spacer RH
8.
Front floor center spacer LH
9.
Center floor insulator
10.
Rear floor spacer
11.
Center floor insulator A
12.
Front floor center spacer RH
13.
Floor spacer C
14.
Front floor spacer RH
15.
Floor side spacer RH
16.
Floor side spacer LH
: Pawl
: Vehicle front
JMJIA6210ZZ
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст