Nissan Quest E52. Instruction — part 1284
WASHER NOZZLE & TUBE
WW-69
< REMOVAL AND INSTALLATION >
C
D
E
F
G
H
I
J
K
M
A
B
WW
N
O
P
4.
Disconnect front washer tube A (1) from joint A (2).
5.
Remove front washer tube mounting clips (A) from the Vehicle.
6.
Remove front washer tube mounting clips from front washer
tube A and B (3).
7.
Remove front washer tube A from the vehicle.
8.
Remove cowl top cover. Refer to
EXT-22, "Removal and Installation"
.
9.
Disconnect front washer tube C and D from the front washer nozzle. Refer to
ZLE : Removal and Installation"
.
10. Remove front washer tube B.
a.
Disconnect front washer tube B from the cowl top cover.
b.
Disconnect front washer tube B check valve.
11. Remove front washer tube C.
a.
Disconnect front washer tube C from the cowl top cover.
b.
Disconnect front washer tube C check valve.
12. Remove front washer tube D.
a.
Disconnect front washer tube D from the cowl top cover.
b.
Disconnect front washer tube D check valve.
INSTALLATION
Note the following item, and then install in the reverse order of removal.
CAUTION:
• When installing front washer tube C to the check valve, install
to portion (B: RH side).
• When installing front washer tube D to the check valve, install
to portion (A: LH side).
REAR WASHER TUBE
REMOVAL
1.
Fully open hood assembly.
2.
Remove fender protector RH (front). Refer to
EXT-23, "Removal and Installation"
3.
Disconnect rear washer tube A from the front & rear washer pump.
: Vehicle front
JMLIA2165ZZ
JMLIA2154ZZ
WW-70
< REMOVAL AND INSTALLATION >
WASHER NOZZLE & TUBE
4.
Remove front kicking plate and rear kicking plate. Refer to
INT-22, "KICKING PLATE : Removal and
.
5.
Remove luggage side lower finisher and back pillar garnish. Refer to
INT-27, "BACK PILLAR GARNISH :
.
6.
Remove third assist grip (LH and RH), and then remove headlining assembly rear clips.
Refer to
INT-35, "Removal and Installation"
7.
Slightly lower the headlining assembly (1) rear and secure work
space.
8.
Disconnect rear washer tube B (3) from joint B (2).
9.
Remove back door upper finisher. Refer to
INT-49, "BACK DOOR UPPER FINISHER : Removal and
.
10. Disconnect rear washer tube C from the rear washer nozzle. Refer to
.
11. Remove rear washer tube mounting clips (A) from the Vehicle.
12. Remove rear washer tube mounting clips from the rear washer tube.
13. Remove rear washer tube from the vehicle.
INSTALLATION
Install in the reverse order of removal.
JMLIA2166ZZ
WASHER LEVEL SWITCH
WW-71
< REMOVAL AND INSTALLATION >
C
D
E
F
G
H
I
J
K
M
A
B
WW
N
O
P
WASHER LEVEL SWITCH
Removal and Installation
INFOID:0000000009649591
The washer level switch must be replaced together with the washer tank as an assembly.
Refer to
WW-59, "Removal and Installation"
.
WW-72
< REMOVAL AND INSTALLATION >
WIPER AND WASHER SWITCH
WIPER AND WASHER SWITCH
Exploded View
INFOID:0000000009649592
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст