Nissan Quest E52. Instruction — part 1240
VTL-10
< REMOVAL AND INSTALLATION >
DUCT AND GRILLE
Install in the reverse order of removal.
SIDE VENTILATOR GRILLE
SIDE VENTILATOR GRILLE : Removal and Installation
INFOID:0000000009650638
REMOVAL
1.
Remove instrument panel assembly. Refer to
IP-14, "Removal and Installation"
.
2.
Remove fixing screw (passenger side only).
3.
Disengage fixing pawls and metal clips, and then remove side ventilator grille.
INSTALLATION
Install in the reverse order of removal.
SIDE DEFROSTER GRILLE
SIDE DEFROSTER GRILLE : Removal and Installation
INFOID:0000000009650639
REMOVAL
Disengage fixing pawl using a remover tool (A), and then remove
side defroster grille.
CAUTION:
Apply protective tape (B) on the part to protect it from damage.
INSTALLATION
Install in the reverse order of removal.
CENTER VENTILATOR DUCT
CENTER VENTILATOR DUCT : Removal and Installation
INFOID:0000000009650640
REMOVAL
1.
Remove instrument panel assembly. Refer to
IP-14, "Removal and Installation"
.
2.
Remove fixing screws, and then remove center ventilator duct.
INSTALLATION
: Pawl
JMIIA1155ZZ
: Screw
JMIIA1800ZZ
DUCT AND GRILLE
VTL-11
< REMOVAL AND INSTALLATION >
C
D
E
F
G
H
J
K
L
M
A
B
VTL
N
O
P
Install in the reverse order of removal.
FRONT DEFROSTER NOZZLE
FRONT DEFROSTER NOZZLE : Removal and Installation
INFOID:0000000009650641
REMOVAL
1.
Remove instrument panel assembly. Refer to
IP-14, "Removal and Installation"
.
2.
Remove center ventilator duct. Refer to
VTL-10, "CENTER VENTILATOR DUCT : Removal and Installa-
3.
Remove side defroster nozzle LH and RH. Refer to
VTL-11, "SIDE DEFROSTER NOZZLE : Removal and
.
4.
Remove fixing screw (A), and then remove instrument panel
center bracket (1).
5.
Remove fixing screws (B), and then remove front defroster noz-
zle (2).
INSTALLATION
Install in the reverse order of removal.
SIDE DEFROSTER NOZZLE
SIDE DEFROSTER NOZZLE : Removal and Installation
INFOID:0000000009650642
REMOVAL
Driver Side
1.
Remove instrument panel assembly. Refer to
IP-14, "Removal and Installation"
.
2.
Remove fixing screws (A), and then remove instrument panel
bracket LH (1).
3.
Remove fixing screw (B), and then remove side defroster nozzle
LH (2).
Passenger Side
1.
Remove instrument panel assembly. Refer to
IP-14, "Removal and Installation"
.
2.
Remove fixing screws (A), and then remove instrument panel
bracket RH (1).
3.
Remove fixing screw (B), and then remove side defroster nozzle
RH (2).
JMIIA1801ZZ
JMIIA1802ZZ
JMIIA1803ZZ
VTL-12
< REMOVAL AND INSTALLATION >
DUCT AND GRILLE
INSTALLATION
Install in the reverse order of removal.
FRONT FLOOR DUCT 1
FRONT FLOOR DUCT 1 : Removal and Installation
INFOID:0000000009650643
REMOVAL
Driver Side
1.
Remove instrument lower cover LH. Refer to
IP-14, "Removal and Installation"
.
2.
Remove front floor duct 1 LH.
Passenger Side
1.
Remove instrument lower cover RH. Refer to
IP-14, "Removal and Installation"
2.
Remove harness fixing clip (A), and then remove front floor duct
1 RH.
INSTALLATION
Install in the reverse order of removal.
FRONT FLOOR DUCT 2
FRONT FLOOR DUCT 2 : Removal and Installation
INFOID:0000000009650644
REMOVAL
1.
Pull up front of front floor carpet to secure work space. Refer to
.
2.
Remove front floor spacer. Refer to
.
3.
Remove fixing screws (A) and harness clips (B), and then
remove front floor duct 2.
INSTALLATION
Install in the reverse order of removal.
FOOT DUCT
FOOT DUCT : Removal and Installation
INFOID:0000000009650645
REMOVAL
Driver Side
1.
Remove instrument lower cover LH. Refer to
IP-14, "Removal and Installation"
.
JMIIA1804ZZ
JMIIA1160ZZ
DUCT AND GRILLE
VTL-13
< REMOVAL AND INSTALLATION >
C
D
E
F
G
H
J
K
L
M
A
B
VTL
N
O
P
2.
Remove fixing screws (A), and then remove foot duct LH (1) and
aspirator (2) from heater & cooling unit assembly as a set.
Passenger Side
1.
Remove heater & cooling unit assembly. Refer to
HA-49, "HEATER & COOLING UNIT ASSEMBLY :
.
2.
Remove fixing screws (A), and then remove foot duct RH from
heater & cooling unit assembly.
INSTALLATION
Install in the reverse order of removal.
REAR VENTILATOR GRILLE
REAR VENTILATOR GRILLE : Removal and Installation
INFOID:0000000009650646
REMOVAL
Disengage fixing metal clips using a remover tool (A), and then
remove rear ventilator grille.
INSTALLATION
Install in reverse order of removal.
REAR FOOT DUCT
REAR FOOT DUCT : Removal and Installation
INFOID:0000000009650647
REMOVAL
1.
Remove luggage side lower finisher RH. Refer to
INT-43, "LUGGAGE SIDE LOWER FINISHER :
.
JMIIA1805ZZ
JMIIA1806ZZ
: Metal clip
JMIIA1185ZZ
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст