Nissan Quest E52. Instruction — part 1241
VTL-14
< REMOVAL AND INSTALLATION >
DUCT AND GRILLE
2.
Remove fixing clips (A), and then remove rear foot duct 1.
INSTALLATION
Install in the reverse order of removal.
REAR VENTILATOR DUCT
REAR VENTILATOR DUCT : Removal and Installation
INFOID:0000000009650648
REMOVAL
1.
Remove back pillar garnish RH. Refer to
INT-27, "BACK PILLAR GARNISH : Removal and Installation"
.
2.
Remove mounting bolts (A), and then remove rear ventilator pil-
lar duct.
3.
Remove headlining. Refer to
INT-35, "Removal and Installation"
4.
Remove mounting bolt (A).
5.
Slide the right side of rear upper ventilator duct 2 as shown in the figure, disengage rear upper ventilator
duct 3, and then remove rear upper ventilator duct 2.
6.
Remove rear sunroof stay (sunroof models only). Refer to
RF-59, "REAR SUNROOF : Exploded View"
.
7.
Remove curtain air bag mounting bolts. Refer to
.
JMIIA1861ZZ
JMIIA1807ZZ
JMIIA1167ZZ
DUCT AND GRILLE
VTL-15
< REMOVAL AND INSTALLATION >
C
D
E
F
G
H
J
K
L
M
A
B
VTL
N
O
P
8.
Remove mounting bolts (A), and then remove fixing clips.
9.
Remove rear upper ventilator duct 3.
10. Remove mounting bolts (A), and then remove fixing clips.
11. Remove rear upper ventilator duct 1.
INSTALLATION
Install in the reverse order of removal.
: Clip
JMIIA1168ZZ
: Clip
JMIIA1169ZZ
VTL-16
< REMOVAL AND INSTALLATION >
BLOWER UNIT
BLOWER UNIT
Exploded View
INFOID:0000000009650649
REMOVAL
DISASSEMBLY
1.
Steering member
2.
Knee protector
3.
Instrument stay LH
4.
Instrument stay RH
5.
Drain hose
6.
Blower unit assembly
7.
Heater & cooling unit assembly
: N·m (kg-m, in-lb)
: N·m (kg-m, ft-lb)
JSIIA1814GB
BLOWER UNIT
VTL-17
< REMOVAL AND INSTALLATION >
C
D
E
F
G
H
J
K
L
M
A
B
VTL
N
O
P
Removal and Installation
INFOID:0000000009650650
REMOVAL
1.
Remove front A/C unit assembly. Refer to
HA-49, "HEATER & COOLING UNIT ASSEMBLY : Removal
2.
Remove fixing screw, and then separate blower unit assembly and heater & cooling unit assembly.
INSTALLATION
Install in the reverse order of removal.
1.
Intake duct case
2.
Intake shutter case
3.
Intake door
4.
Intake upper case
5.
Intake lower case
6.
Intake door motor
7.
Blower motor
8.
Outlet seal
9.
Intake seal
: Vehicle front
JMIIA1809ZZ
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст