Nissan Quest E52. Instruction — part 294
DAS-18
< SYSTEM DESCRIPTION >
[BSW]
DIAGNOSIS SYSTEM (BSW CONTROL MODULE)
DIAGNOSIS SYSTEM (BSW CONTROL MODULE)
CONSULT Function (BSW)
INFOID:0000000009940673
APPLICATION ITEMS
CONSULT performs the following functions via CAN communication using BSW control module.
SELF DIAGNOSTIC RESULT
.
DATA MONITOR
NOTE:
• The following table includes information (items) inapplicable to this vehicle. For information (items) applica-
ble to this vehicle, refer to CONSULT display items.
• SIGNAL B, SIGNAL C are displayed, but not used.
ACTIVE TEST
CAUTION:
• Never perform “Active Test” while driving the vehicle.
• The “Active Test” cannot be performed when the BSW warning lamp is illuminated.
• Shift the selector lever to “P” position, and then perform the test.
Diagnosis mode
Description
Self Diagnostic Result
Displays the name of a malfunctioning system stored in the BSW control module
Data Monitor
Displays BSW control module input/output data in real time
Active Test
Enables an operational check of a load by transmitting a driving signal from the BSW control module
to the load
Ecu Identification
Displays BSW control module part number
CAN Diag Support Monitor
Displays a reception/transmission state of CAN communication and BSW communication
Monitored item
[Unit]
SIGNAL A
BSW
MAI
N
SIGNAL
Description
VHCL SPEED SE
[km/h] or [mph]
×
×
Indicates vehicle speed calculated from BSW control module through CAN communication [ABS
actuator and electric unit (control unit) transmits vehicle speed signal (wheel speed) through
CAN communication]
BUZZER O/P
[On/Off]
×
Indicates [On/Off] status of BSW warning chime output
Shift position
[Off, P, R, N, D]
×
Indicates shift position read from BSW control module through CAN communication (TCM trans-
mits shift position signal through CAN communication)
Turn signal
[OFF/LH/RH/LH&RH]
×
Indicates turn signal operation status read from BSW control module through CAN communica-
tion (BCM transmits turn indicator signal through CAN communication)
WARN SYS SW
[On/Off]
×
×
Indicates [On/Off] status of BSW switch
BSW/BSI WARN LMP
[On/Off]
×
Indicates [On/Off] status of BSW warning lamp output
BSW SYSTEM ON
[On/Off]
×
Indicates [On/Off] status of BSW system
Test item
Description
ICC BUZZER
Sounds a buzzer used for BSW system by arbitrarily operating ON/OFF
BSW/BSI WARNING LAMP
The BSW warning lamp can be illuminated by ON/OFF operations as necessary
DAS
DIAGNOSIS SYSTEM (BSW CONTROL MODULE)
DAS-19
< SYSTEM DESCRIPTION >
[BSW]
C
D
E
F
G
H
I
J
K
L
M
B
N
P
A
ICC BUZZER
BSW/BSI WARNING LAMP
Test item
Operation
Description
BSW warning chime operation
sound
ICC BUZZER
MODE1
Transmits the buzzer output signals to the combination
meter via CAN communication
Intermittent beep sound
Test start
Starts the tests of “MODE1”
—
Reset
Stops transmitting the buzzer output signal below to end
the test
—
End
Returns to the “SELECT TEST ITEM” screen
—
Test item
Operation
Description
BSW warning lamp
BSW/BSI WARNING
LAMP
Off
Stops transmitting the BSW warning lamp signal below to
end the test
—
On
Transmits the BSW warning lamp signal to the combina-
tion meter via CAN communication
ON
DAS-20
< SYSTEM DESCRIPTION >
[BSW]
DIAGNOSIS SYSTEM (SIDE RADAR LH)
DIAGNOSIS SYSTEM (SIDE RADAR LH)
CONSULT Function (SIDE RADAR LEFT)
INFOID:0000000009940674
DESCRIPTION
CONSULT performs the following functions by communicating with the side radar LH.
SELF DIAGNOSTIC RESULT
Self Diagnostic Result
Displays memorized DTC in side radar LH. Refer to
.
FFD (Freeze Frame Data)
The side radar records the following data when the malfunction is detected.
DATA MONITOR
NOTE:
The following table includes information (items) inapplicable to this vehicle. For information (items) applicable
to this vehicle, refer to CONSULT display items.
ACTIVE TEST
CAUTION:
• Never perform the active test while driving.
• Active test cannot be started while the BSW indicator is illuminated.
Select diag mode
Function
Self Diagnostic Result
Displays memorized DTC in the side radar
Data Monitor
Displays real-time data of side radar
Active Test
Enables operation check of electrical loads by sending driving signal to them
Ecu Identification
Displays part number of side radar
Freeze Frame Data item
Description
VHCL SP from ADAS
The vehicle speed (from BSW control module) at the moment a malfunction is detected is dis-
played
TURN SIG STATUS
Turn signal status at the moment a malfunction is detected is displayed
Monitored item
[Unit]
Description
BEAM DISTANCE
[—]
NOTE:
The item is displayed, but it is not used
BEAM POSITION
[—]
NOTE:
The item is displayed, but it is not used
SIDE RADAR MALF
[On/Off]
Indicates [On/Off] status of side radar malfunction
BLOCKAGE COND
[On/Off]
Indicates [On/Off] status of side radar blockage
ACTIVATE OPE
[—]
NOTE:
The item is displayed, but it is not used
VEHICLE DETECT
[On/Off]
Indicates [On/Off] status of vehicle detection
Active test item
Operation
Description
BSW/BSI INDICATOR
DRIVE
On
Outputs the voltage to illuminate the BSW indicator
Off
Stops the voltage to illuminate the BSW indicator
DAS
DIAGNOSIS SYSTEM (SIDE RADAR RH)
DAS-21
< SYSTEM DESCRIPTION >
[BSW]
C
D
E
F
G
H
I
J
K
L
M
B
N
P
A
DIAGNOSIS SYSTEM (SIDE RADAR RH)
CONSULT Function (SIDE RADAR RIGHT)
INFOID:0000000009940675
DESCRIPTION
CONSULT performs the following functions by communicating with the side radar RH.
SELF DIAGNOSTIC RESULT
Self Diagnostic Result
Displays memorized DTC in side radar RH. Refer to
FFD (Freeze Frame Data)
The side radar records the following data when the malfunction is detected.
DATA MONITOR
NOTE:
The following table includes information (items) inapplicable to this vehicle. For information (items) applicable
to this vehicle, refer to CONSULT display items.
ACTIVE TEST
CAUTION:
• Never perform the active test while driving.
• Active test cannot be started while the BSW indicator is illuminated.
Select diag mode
Function
Self Diagnostic Result
Displays memorized DTC in the side radar
Data Monitor
Displays real-time data of side radar
Active Test
Enables operation check of electrical loads by sending driving signal to them
Ecu Identification
Displays part number of side radar
Freeze Frame Data item
Description
VHCL SP from ADAS
The vehicle speed (from BSW control module) at the moment a malfunction is detected is dis-
played
TURN SIG STATUS
Turn signal status at the moment a malfunction is detected is displayed
Monitored item
[Unit]
Description
BEAM DISTANCE
[—]
NOTE:
The item is displayed, but it is not used
BEAM POSITION
[—]
NOTE:
The item is displayed, but it is not used
SIDE RADAR MALF
[On/Off]
Indicates [On/Off] status of side radar malfunction
BLOCKAGE COND
[On/Off]
Indicates [On/Off] status of side radar blockage
ACTIVATE OPE
[—]
NOTE:
The item is displayed, but it is not used
VEHICLE DETECT
[On/Off]
Indicates [On/Off] status of vehicle detection
Active test item
Operation
Description
BSW/BSI INDICATOR
DRIVE
On
Outputs the voltage to illuminate the BSW indicator
Off
Stops the voltage to illuminate the BSW indicator
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст