Nissan Quest E52. Instruction — part 441
DLK-478
< REMOVAL AND INSTALLATION >
BACK DOOR LOCK
3.
Remove fixing clips and screws of touch sensor.
4.
Pull harness of touch sensor out of back door and remove touch sensor.
INSTALLATION
Note the following items, and then install in the reverse order of removal.
CAUTION:
• After installing touch sensor using fixing clips (A), tighten fix-
ing screws in numerical order as shown in the figure.
• Check back door open/close operation after installation.
EMERGENCY LEVER
EMERGENCY LEVER : Unlock procedures
INFOID:0000000009649485
UNLOCK PROCEDURES
NOTE:
If back door lock cannot be unlocked due to a malfunction or battery discharge, follow the procedures to
unlock back door.
1.
Remove the emergency lid. Refer to
INT-50, "EMERGENCY LID : Removal and Installation"
.
2.
From inside the vehicle, rotate emergency lever toward lower
direction and unlock.
: Vehicle front
JMKIA6282ZZ
: Vehicle front
JMKIA8267ZZ
JMKIA5264ZZ
FUEL FILLER LID OPENER
DLK-479
< REMOVAL AND INSTALLATION >
C
D
E
F
G
H
I
J
L
M
A
B
DLK
N
O
P
FUEL FILLER LID OPENER
Exploded View
INFOID:0000000009649486
CAUTION:
After installation, check fuel filler lid assembly open/close, lock/unlock operation.
FUEL FILLER LID
FUEL FILLER LID : Removal and Installation
INFOID:0000000009649487
REMOVAL
1.
Fully open fuel filler lid.
2.
Remove fuel mounting pin (1).
1.
Fuel filler lid opener cable
2.
TORX bolt
3.
Fuel filler lid assembly
4.
Bumper rubber
5.
Fuel filler lid lock assembly
: Clip
: Pawl
: N·m (kg-m, in-lb)
JMKIA8268GB
JMKIA8269ZZ
DLK-480
< REMOVAL AND INSTALLATION >
FUEL FILLER LID OPENER
3.
Remove mounting screws, and then remove fuel filler lid.
INSTALLATION
Note the following item, and install in the reverse order of removal.
CAUTION:
After installation, check fuel filler lid assembly open/close, lock/unlock operation.
NOTE:
• The following table shows the specified values for checking normal installation status.
• Fitting adjustment cannot be performed.
FUEL FILLER OPENER CABLE
FUEL FILLER OPENER CABLE : Removal and Installation
INFOID:0000000009649488
REMOVAL
1.
Remove hood lock control handle from instrument lower panel LH. Refer to
CONTROL HANDLE : Removal and Installation"
.
2.
Remove fuel filler lid opener cable (2) from fuel filler lid opener
lever (1).
3.
Remove front kicking plate LH and rear kicking plate LH. Refer to
INT-22, "KICKING PLATE : Removal
4.
Remove dash side finisher LH. Refer to
INT-24, "DASH SIDE FINISHER : Removal and Installation"
.
5.
Remove center pillar lower garnish LH. Refer to
INT-25, "CENTER PILLAR LOWER GARNISH : Removal
6.
Remove luggage side lower finisher LH. Refer to
INT-43, "LUGGAGE SIDE LOWER FINISHER :
.
7.
Remove fuel filler lid opener cable from fuel filler lid lock assembly. Refer to
LOCK : Removal and Installation"
.
8.
Remove fuel filler lid opener cable from each harness clamp of body harness.
9.
Remove fuel filler lid opener cable fixing clips, and then remove fuel filler lid opener cable.
INSTALLATION
Note the following item, and install in the reverse order of removal.
CAUTION:
After installation, check fuel filler lid assembly open/close, lock/unlock operation.
FUEL FILLER LID LOCK
FUEL FILLER LID LOCK : Removal and Installation
INFOID:0000000009649489
REMOVAL
1.
Fully open fuel filler lid.
2.
Remove luggage side lower finisher LH. Refer to
INT-43, "LUGGAGE SIDE LOWER FINISHER :
.
Clearance
Evenness
Fuel filler lid – Body side outer
2.0 – 4.0 mm (0.079 – 0.157 in)
(-1.0) – (+1.0) mm [(-0.039) –
(+0.039) in]
JMKIA5901ZZ
FUEL FILLER LID OPENER
DLK-481
< REMOVAL AND INSTALLATION >
C
D
E
F
G
H
I
J
L
M
A
B
DLK
N
O
P
3.
Rotate and disengage fuel filler lid lock assembly, and then
remove fuel filler lid lock assembly.
NOTE:
Operation is performed easily when rotating fuel filler lid lock
from passenger room side.
4.
Disengage fuel filler lid opener cable (1). Remove fuel filler lid
opener cable while pressing stopper pin (2).
INSTALLATION
Note the following item, and install in the reverse order of removal.
CAUTION:
After installation, check fuel filler lid assembly open/close, lock/unlock operation.
JMKIA8270ZZ
JMKIA8271ZZ
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст