Nissan Quest E52. Instruction — part 419
DLK-390
< SYMPTOM DIAGNOSIS >
KEY ID WARNING DOES NOT OPERATE
KEY ID WARNING DOES NOT OPERATE
Diagnosis Procedure
INFOID:0000000009649354
1.
CHECK DTC WITH BCM AND COMBINATION METER
Check that DTC is not detected with BCM and combination meter.
Is the inspection result normal?
YES
>> GO TO 2.
NO-1
>> Refer to
(BCM).
NO-2
>> Refer to
(Combination meter).
2.
CHECK INTELLIGENT KEY BATTERY
Check Intelligent Key battery.
Refer to
DLK-275, "Component Function Check"
Is the inspection result normal?
YES
>> GO TO 3.
NO
>> Repair or replace the malfunctioning parts.
3.
CHECK INSIDE KEY ANTENNA
Check inside key antenna.
• Instrument center: Refer to
.
• Console: Refer to
• Luggage room: Refer to
.
Is the inspection result normal?
YES
>> GO TO 4.
NO
>> Repair or replace the malfunctioning parts.
4.
CHECK INFORMATION DISPLAY
Check information display.
Refer to
DLK-277, "Component Function Check"
Is the inspection result normal?
YES
>> GO TO 5.
NO
>> Repair or replace the malfunctioning parts.
5.
REPLACE BCM
1.
Replace BCM. Refer to
BCS-98, "Removal and Installation"
.
2.
Confirm the operation after replacement.
Is the result normal?
YES
>> INSPECTION END
NO
>> Check intermittent incident. Refer to
GI-42, "Intermittent Incident"
.
INTELLIGENT KEY LOW BATTERY WARNING DOES NOT OPERATE
DLK-391
< SYMPTOM DIAGNOSIS >
C
D
E
F
G
H
I
J
L
M
A
B
DLK
N
O
P
INTELLIGENT KEY LOW BATTERY WARNING DOES NOT OPERATE
Diagnosis Procedure
INFOID:0000000009649355
1.
CHECK DTC WITH BCM AND COMBINATION METER
Check that DTC is not detected with BCM and combination meter.
Is the inspection result normal?
YES
>> GO TO 2.
NO-1
>> Refer to
(BCM).
NO-2
>> Refer to
(Combination meter).
2.
CHECK “LO- BATT OF KEY FOB WARN” SETTING IN “WORK SUPPORT”
1.
Select “INTELLIGENT KEY” of “BCM”.
2.
Select “LO- BATT OF KEY FOB WARN” in “WORK SUPPORT” mode.
3.
Check “LO- BATT OF KEY FOB WARN” setting in “WORK SUPPORT”.
Refer to
DLK-95, "INTELLIGENT KEY : CONSULT Function (BCM - INTELLIGENT KEY)"
.
Is the inspection result normal?
YES
>> GO TO 3.
NO
>> Set “ON” in “LO- BATT OF KEY FOB WARN”.
3.
CHECK INTELLIGENT KEY BATTERY
Check Intelligent Key battery.
Refer to
DLK-275, "Component Function Check"
Is the inspection result normal?
YES
>> GO TO 4.
NO
>> Repair or replace the malfunctioning parts.
4.
CHECK INFORMATION DISPLAY
Check information display.
Refer to
DLK-277, "Component Function Check"
Is the inspection result normal?
YES
>> GO TO 5.
NO
>> Repair or replace the malfunctioning parts.
5.
CHECK INSIDE KEY ANTENNA
Check inside key antenna.
• Instrument center: Refer to
.
.
• Luggage room: Refer to
.
Is the inspection result normal?
YES
>> GO TO 6.
NO
>> Repair or replace the malfunctioning parts.
6.
REPLACE BCM
1.
Replace BCM. Refer to
BCS-98, "Removal and Installation"
.
2.
Confirm the operation after replacement.
Is the result normal?
YES
>> INSPECTION END
NO
>> Check intermittent incident. Refer to
GI-42, "Intermittent Incident"
.
DLK-392
< SYMPTOM DIAGNOSIS >
DOOR LOCK OPERATION WARNING DOES NOT OPERATE
DOOR LOCK OPERATION WARNING DOES NOT OPERATE
Diagnosis Procedure
INFOID:0000000009649356
1.
CHECK DOOR LOCK FUNCTION
Check door lock function.
Does door lock/unlock using door request switch?
YES
>> GO TO 2.
NO
>> Refer to
DLK-372, "ALL DOOR REQUEST SWITCHES : Diagnosis Procedure"
.
2.
CHECK INTELLIGENT KEY WARNING BUZZER
Check Intelligent Key warning buzzer.
Refer to
DLK-273, "Component Function Check"
Is the inspection result normal?
YES
>> GO TO 3.
NO
>> Repair or replace the malfunctioning parts.
3.
REPLACE BCM
1.
Replace BCM. Refer to
BCS-98, "Removal and Installation"
.
2.
Confirm the operation after replacement.
Is the result normal?
YES
>> INSPECTION END
NO
>> Check intermittent incident. Refer to
GI-42, "Intermittent Incident"
.
BACK DOOR AUTO CLOSURE FUNCTION DOES NOT OPERATE
DLK-393
< SYMPTOM DIAGNOSIS >
C
D
E
F
G
H
I
J
L
M
A
B
DLK
N
O
P
BACK DOOR AUTO CLOSURE FUNCTION DOES NOT OPERATE
OPEN/CLOSURE FUNCTION
OPEN/CLOSURE FUNCTION : Description
INFOID:0000000009649357
Back door auto closure does not operate when back door opening and closing operations are performed.
OPEN/CLOSURE FUNCTION : Diagnosis Procedure
INFOID:0000000009649358
1.
CHECK DTC WITH BCM
Check that DTC is not detected with BCM.
Is the inspection result normal?
YES
>> GO TO 2.
NO
>> Refer to
2.
CHECK POWER SUPPLY AND GROUND CIRCUIT
Check back door control unit power supply and ground circuit.
Refer to
DLK-238, "BACK DOOR CONTROL UNIT : Diagnosis Procedure"
.
Is the inspection result normal?
YES
>> GO TO 3.
NO
>> Repair or replace the malfunctioning parts.
3.
CHECK BACK DOOR CLOSURE MOTOR
Check back door closure motor.
Refer to
DLK-304, "WITHOUT AUTOMATIC BACK DOOR : Diagnosis Procedure"
.
Is the inspection result normal?
YES
>> GO TO 4.
NO
>> Repair or replace the malfunctioning parts.
4.
REPLACE BACK DOOR CONTROL UNIT
1.
Replace back door control unit.
2.
Confirm the operation after replacement.
Is the result normal?
YES
>> INSPECTION END
NO
>> Check intermittent incident. Refer to
GI-42, "Intermittent Incident"
.
OPEN FUNCTION
OPEN FUNCTION : Description
INFOID:0000000009649359
Back door auto closure does not operate when back door opening operation is performed.
OPEN FUNCTION : Diagnosis Procedure
INFOID:0000000009649360
1.
CHECK BACK DOOR OPENER SWITCH
Check back door opener switch.
Refer to
DLK-271, "Component Function Check"
Is the inspection result normal?
YES
>> GO TO 2.
NO
>> Repair or replace the malfunctioning parts.
2.
CHECK BACK DOOR OPEN REQUEST SIGNAL CIRCUIT
Check back door open request signal circuit.
Refer to
DLK-280, "Diagnosis Procedure"
Is the inspection result normal?
YES
>> GO TO 3.
NO
>> Repair or replace the malfunctioning parts.
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст