Nissan Quest E52. Instruction — part 346
DLK-98
< SYSTEM DESCRIPTION >
DIAGNOSIS SYSTEM (BCM)
TRUNK
TRUNK : CONSULT Function (BCM - TRUNK)
INFOID:0000000009649014
DATA MONITOR
NOTE:
The following table includes information (items) inapplicable to this vehicle. For information (items) applicable
to this vehicle, refer to CONSULT display items.
LCD
This test is able to check meter display information
• Engine start information displays when “BP N” on CONSULT screen is touched
• Engine start information displays when “BP I” on CONSULT screen is touched
• Key ID warning displays when “ID NG” on CONSULT screen is touched
• ROTAT: This item is displayed, but cannot be used.
• P position warning displays when “SFT P” on CONSULT screen is touched
• INSRT: This item is displayed, but cannot be monitored
• BATT: This item is displayed, but cannot be monitored
• Take away through window warning displays when “NO KY” on CONSULT screen is
touched
• Take away warning display when “OUTKEY” on CONSULT screen is touched
• OFF position warning display when “LK WN” on CONSULT screen is touched
FLASHER
This test is able to check hazard warning lamp operation
• LH: LH side hazard warning lamps operate
• RH: RH side hazard warning lamps operate
• Off: Non-operation
P RANGE
This test is able to check CVT shift selector power supply
• On: Operate
• Off: Non-operation
ENGINE SW ILLUMI
This test is able to check push-button ignition switch illumination operation
• On: Operate
• Off: Non-operation
LOCK INDICATOR
This test is able to check LOCK indicator (push-button ignition switch) operation
• On: Operate
• Off: Non-operation
ACC INDICATOR
This test is able to check ACC indicator (push-button ignition switch) operation
• On: Operate
• Off: Non-operation
IGNITION ON IND
This test is able to check ON indicator (push-button ignition switch) operation
• On: Operate
• Off: Non-operation
HORN
This test is able to check horn operation
• On: Operate
• Off: Non-operation
TRUNK/BACK DOOR
NOTE:
This item is displayed, but cannot be used
POWER SLIDE DOOR
This test is able to check automatic siding door operation
• RR PSD ON: Auto open/close operate
• RL PSD ON: Auto open/close operate
Test item
Description
Monitor Item
Contents
PUSH SW
Indicates [On/Off] condition of push switch
UNLK SEN -DR
Indicates [On/Off] condition of unlock sensor
VEH SPEED 1
Indicates [km/h] condition of vehicle speed signal from combination meter
TR/BD OPEN SW
Indicates [On/Off] condition of back door opener switch
DIAGNOSIS SYSTEM (BCM)
DLK-99
< SYSTEM DESCRIPTION >
C
D
E
F
G
H
I
J
L
M
A
B
DLK
N
O
P
TRNK/HAT MNTR
NOTE:
This item is displayed, but cannot be monitored
RKE-TR/BD
NOTE:
This item is displayed, but cannot be monitored
Monitor Item
Contents
DLK-100
< SYSTEM DESCRIPTION >
DIAGNOSIS SYSTEM (AUTOMATIC BACK DOOR CONTROL UNIT)
DIAGNOSIS SYSTEM (AUTOMATIC BACK DOOR CONTROL UNIT)
CONSULT Function (AUTOMATIC BACK DOOR CONTROL UNIT)
INFOID:0000000009649015
APPLICATION ITEM
CONSULT performs the following functions via CAN communication with automatic back door control unit.
DATA MONITOR
NOTE:
The following table includes information (items) inapplicable to this vehicle. For information (items) applicable
to this vehicle, refer to CONSULT display items.
SELF-DIAG RESULT
Diagnosis mode
Function Description
Self Diagnostic Result
Displays the diagnosis results judged by automatic back door control unit
CAN Diag Support Monitor
Monitors the reception status of CAN communication viewed from automatic back door
control unit
Data Monitor
The automatic back door control unit input/output signals are displayed
Ecu Identification
The automatic back door control unit part number is displayed
Monitor Item
Unit
Description
VHCL SPEED MTR
[km/h]
Display the vehicle speed signal received from combination meter by nu-
merical value
VHCL SPEED ABS
[km/h]
Display the vehicle speed signal received from ABS actuator and electrical
unit by numerical value
VHCL SPEED SIG
[NORMAL/ER-
ROR]
Indicates condition of vehicle speed from automatic back door control unit
MAIN SW
[ON/OFF]
Indicates condition of automatic door main switch
AUTO BD SW
[ON/OFF]
Indicates condition of automatic back door switch
BK DOOR CL SW
[ON/OFF]
Indicates condition of automatic back door close switch
UNLOCK SEN DR
[ON/OFF]
NOTE:
This item is displayed, but cannot be monitored
OPEN SW
[ON/OFF]
Indicates condition of open switch
CLOSE SW
[ON/OFF]
Indicates condition of close switch
HALF LATCH SW
[ON/OFF]
Indicates condition of half latch switch
TOUCH SEN RH
[ON/OFF/OPEN]
Indicates condition of touch sensor RH
TOUCH SEN LH
[ON/OFF/OPEN]
Indicates condition of touch sensor LH
P RANGE IND
[ON/OFF]
Indicates condition of P range signal from TCM
RKE REQ
[OFF/MOVE/
REV]
Indicates condition of remote keyless entry signal from BCM
IGN SW
[ON/OFF]
Indicates condition of IGN power supply
ENCODER A
[LO/HI]
Indicates condition of encoder signal from encoder A
ENCODER B
[LO/HI]
Indicates condition of encoder signal from encoder B
BD OPENER SW
[ON/OFF]
Indicates condition of back door opener switch
UNLOCK SEN BD
[LOCK/
UNLOCK]
NOTE:
This item is displayed, but cannot be monitored
DESTINATION
[JPN/NAM]
Indicates specification of destination of the automatic back door system
HAZARD
[ON/OFF]
Indicates specification of hazard warning
DIAGNOSIS SYSTEM (SLIDING DOOR CONTROL UNIT LH)
DLK-101
< SYSTEM DESCRIPTION >
C
D
E
F
G
H
I
J
L
M
A
B
DLK
N
O
P
DIAGNOSIS SYSTEM (SLIDING DOOR CONTROL UNIT LH)
CONSULT Function
INFOID:0000000009649016
APPLICATION ITEM
CONSULT performs the following functions via CAN communication with sliding door control unit LH.
DATA MONITOR
NOTE:
The following table includes information (items) inapplicable to this vehicle. For information (items) applicable
to this vehicle, refer to CONSULT display items.
Diagnosis mode
Function description
Self Diagnostic Result
Displays the diagnosis results judged by sliding door control unit LH
CAN Diag Support Monitor
Monitors the reception status of CAN communication viewed from sliding door control
unit LH
Data Monitor
The sliding door control unit LH input/output signals are displayed
Active Test
The signal used to activate each device are forcibly supplied from sliding door control
unit LH
Ecu Identification
The sliding door control unit LH part number is displayed
Monitor item
Description
SPEED METER
Vehicle speed signal from combination meter is displayed
ABS SPEED
Vehicle speed signal from ABS actuator and electric unit (control unit) is displayed
MAIN SW
[ON/OFF] status of automatic door main switch, which is judged from automatic door main
switch signal, is displayed
KNOB LCK SW L
[Lock (OFF)/unlock (ON)] status of sliding door LH, which is judged from sliding door lock/
unlock status signal, is displayed
ONE-TOUCH SW
[Operation (ON)/non-operation (OFF)] status of sliding door one-touch open/close switch
LH, which is judged from sliding door one-touch open/close switch signal, is displayed
F LID SW
[ON/OFF] status of fuel filler lid status switch, which is judged from fuel filler lid open/close
status signal, is displayed
B PILLER SW
[Operation (ON)/non-operation (OFF)] status of sliding door open/close switch (rear LH),
which is judged from sliding door open/close switch (rear LH) signal, is displayed
DRIVER SW
[Operation (ON)/non-operation (OFF)] status of sliding door open/close switch (front LH),
which is judged from sliding door open/close switch (front LH) signal, is displayed
ACC On SW
[ON, ACC status (ON)/other than ON, ACC (OFF)] status of ignition switch, which is
judged from ACC signal, is displayed
DOR HAND SW L
[Operation (ON)/non-operation (OFF)] status of sliding door handle LH, which is judged
from sliding door handle switch signal, is displayed
TOUCH SEN LH
[Pinching detection (ON)/non-detection (OFF)] status of sliding door touch sensor LH,
which is judged from sliding door touch sensor signal, is displayed
RR-LH DOOR SW
[Open (ON)/close (OFF)] status of sliding door LH, which is judged from sliding door
switch signal, is displayed
HAF LATC SW L
[Half latch, fully close (OFF)/open (ON)] status of half latch switch, which is judged from
half latch switch signal, is displayed
P RANGE SW
[P position (ON)/other than P position (OFF)] status of selector lever, which is judged from
shift position signal, is displayed
BRAKE SW
[Depressed (ON)/non-depressed (OFF)] status of brake pedal, which is judged from stop
lamp switch signal, is displayed
P BRAKE SW
[Operation (ON)/non-operation (OFF)] status of parking brake, which is judged from park
brake switch signal, is displayed
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст