Nissan Quest E52. Instruction — part 886
MIR-8
< SYSTEM DESCRIPTION >
[WITH ADP]
SYSTEM
NOTE:
During the reverse interlock door mirror system, if all of the above conditions are not satisfied, mirror face
returns to original angle.
AUTOMATIC DRIVE POSITIONER SYSTEM LINKED OPERATION
Description
Door mirror control is included in automatic drive positioner system. Refer to automatic drive positioner system
for more details.
Refer to
ADP-9, "AUTOMATIC DRIVE POSITIONER SYSTEM : System Description"
.
DOOR MIRROR SYSTEM : Schematic
INFOID:0000000009652705
AUTO ANTI-DAZZLING INSIDE MIRROR SYSTEM
AUTO ANTI-DAZZLING INSIDE MIRROR SYSTEM : System Description
INFOID:0000000009652706
The sensor built in inside mirror detects the brightness of headlight of the vehicle behind and automatically
changes the light transmission to decrease the brightness.
JMLIA2117GB
DIAGNOSIS SYSTEM (DRIVER SEAT CONTROL UNIT)
MIR-9
< SYSTEM DESCRIPTION >
[WITH ADP]
C
D
E
F
G
H
I
J
K
M
A
B
MIR
N
O
P
DIAGNOSIS SYSTEM (DRIVER SEAT CONTROL UNIT)
CONSULT Function
INFOID:0000000009652707
The automatic drive positioner system can be checked and diagnosed for component operation using CON-
SULT.
APPLICATION ITEMS
SELF-DIAGNOSIS RESULTS
DATA MONITOR
NOTE:
The following table includes information (items) inapplicable to this vehicle. For information (items) applicable
to this vehicle, refer to CONSULT display items.
Diagnostic mode
Description
Ecu Identification
Displays part numbers of driver seat control unit.
Self Diagnostic Result
Performs self-diagnosis for the auto drive positioner system and displays the results.
Data Monitor
Displays input signals transmitted from various switches and sensors to driver seat control unit
in real time.
Active Test
Drives each output unit.
Work support
Changes the setting for each system function.
Monitor Item
Unit
Main
Signals
Selection
From
Menu
Contents
STARTER SW
“ON/OFF”
×
×
Ignition key switch ON (START, ON) /OFF (ACC, OFF) sta-
tus judged from the ignition switch signal.
SET SW
“ON/OFF”
×
×
ON/OFF status judged from the setting switch signal.
MEMORY SW 1
“ON/OFF”
×
×
ON/OFF status judged from the seat memory switch 1 sig-
nal.
MEMORY SW 2
“ON/OFF”
×
×
ON/OFF status judged from the seat memory switch 2 sig-
nal.
DETENT SW
“ON/OFF”
×
×
The CVT shift selector position “OFF (P position) / ON (oth-
er than P position)” judged from the detention switch signal.
STEERING STATUS
“LOCK/UN-
LOCK”
×
×
NOTE:
This item is indicated, but not monitored.
SLIDE SW–FR
“ON/OFF”
×
×
ON/OFF status judged from the sliding switch (forward) sig-
nal.
SLIDE SW–RR
“ON/OFF”
×
×
ON/OFF status judged from the sliding switch (backward)
signal.
RECLN SW–FR
“ON/OFF”
×
×
ON/OFF status judged from the reclining switch (forward)
signal.
RECLN SW–RR
“ON/OFF”
×
×
ON/OFF status judged from the reclining switch (backward)
signal.
LIFT FR SW–UP
“ON/OFF”
×
×
ON/OFF status judged from the lifting switch front (up) sig-
nal.
LIFT FR SW–DN
“ON/OFF”
×
×
ON/OFF status judged from the lifting switch front (down)
signal.
LIFT RR SW–UP
“ON/OFF”
×
×
ON/OFF status judged from the lifting switch rear (up) sig-
nal.
LIFT RR SW–DN
“ON/OFF”
×
×
ON/OFF status judged from the lifting switch rear (down)
signal.
MIR CON SW–UP
“ON/OFF”
×
×
ON/OFF status judged from the mirror switch (up) signal.
MIR-10
< SYSTEM DESCRIPTION >
[WITH ADP]
DIAGNOSIS SYSTEM (DRIVER SEAT CONTROL UNIT)
ACTIVE TEST
CAUTION:
When driving vehicle, do not perform active test.
MIR CON SW–DN
“ON/OFF”
×
×
ON/OFF status judged from the mirror switch (down) signal.
MIR CON SW–RH
“ON/OFF”
×
×
ON/OFF status judged from the mirror switch (right) signal.
MIR CON SW–LH
“ON/OFF”
×
×
ON/OFF status judged from the mirror switch (left) signal.
MIR CHNG SW–R
“ON/OFF”
×
×
ON/OFF status judged from the door mirror remote control
switch (switching to right) signal.
MIR CHNG SW–L
“ON/OFF”
×
×
ON/OFF status judged from the door mirror remote control
switch (switching to left) signal.
VEHICLE SPEED
—
×
×
Display the vehicle speed signal received from combination
meter by numerical value [km/h].
P RANG SW CAN
“ON/OFF”
×
×
ON/OFF status judged from the P range switch signal.
R RANGE (CAN)
“ON/OFF”
×
×
ON/OFF status judged from the R range switch signal.
DOOR SW–FL
“ON/OFF”
×
×
ON/OFF status judged from the front door switch (driver
side) signal.
DOOR SW–FR
“ON/OFF”
×
×
ON/OFF status judged from the door switch (front passen-
ger side) signal.
IGN ON SW
“ON/OFF”
×
×
ON/OFF status judged from the ignition switch signal.
ACC ON SW
“ON/OFF”
×
×
ON/OFF status judged from the ACC switch signal.
KEY ON SW
“ON/OFF”
×
×
ON/OFF status judged from the key on switch signal.
KEYLESS ID
—
×
×
Key ID status judged from the key ID signal.
KYLS DR UNLK
“ON/OFF”
×
×
ON/OFF status judged from the driver side door unlock ac-
tuator output switch signal.
VHCL SPEED (ABS)
“ON/OFF”
×
×
ON/OFF status judged from vehicle speed signal.
HANDLE
“RHD/LHD”
×
×
RHD/LHD status judged from handle position signal.
TRANSMISSION
“AT or CVT/
MT”
×
×
AT or CVT/MT status judged from transmission.
SLIDE PULSE
—
–
×
Value (32768) when battery connections are standard. If it
moves backward, the value increases. If it moves forward,
the value decreases.
RECLN PULSE
—
–
×
Value (32768) when battery connections are standard. If it
moves backward, the value increases. If it moves forward,
the value decreases.
LIFT FR PULSE
—
–
×
Value (32768) when battery connections are standard. If it
moves DOWN, the value increases. If it moves UP, the val-
ue decreases.
LIFT RR PULSE
—
–
×
Value (32768) when battery connections are standard. If it
moves DOWN, the value increases. If it moves UP, the val-
ue decreases.
MIR/SEN RH U–D
“V”
–
×
Voltage input from door mirror sensor (passenger side) up/
down is displayed.
MIR/SEN RH R–L
“V”
–
×
Voltage input from door mirror sensor (passenger side) left/
right is displayed.
MIR/SEN LH U–D
“V”
–
×
Voltage input from door mirror sensor (driver side) up/down
is displayed.
MIR/SEN LH R–L
“V”
–
×
Voltage input from door mirror sensor (driver side) left/right
is displayed.
Monitor Item
Unit
Main
Signals
Selection
From
Menu
Contents
DIAGNOSIS SYSTEM (DRIVER SEAT CONTROL UNIT)
MIR-11
< SYSTEM DESCRIPTION >
[WITH ADP]
C
D
E
F
G
H
I
J
K
M
A
B
MIR
N
O
P
WORK SUPPORT
Test item
Description
SEAT SLIDE
Activates/deactivates the sliding motor.
SEAT RECLINING
Activates/deactivates the reclining motor.
SEAT LIFTER FR
Activates/deactivates the lifting motor (front).
SEAT LIFTER RR
Activates/deactivates the lifting motor (rear).
MIRROR MOTOR RH
Activates/deactivates the mirror motor (passenger side).
MIRROR MOTOR LH
Activates/deactivates the mirror motor (driver side).
MEMORY SW INDCTR
Turns ON/OFF the memory indicator.
Work item
Content
Item
SEAT SLIDE VOLUME SET
The amount of seat sliding for entry/exit assist can be selected
from 3 items.
40 mm
80 mm
150 mm
EXIT SEAT SLIDE SETTING
Entry/exit assist (seat) can be selected:
ON (operated) – OFF (not operated)
ON
OFF
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст