Nissan Quest E52. Instruction — part 885
MIR-4
< PREPARATION >
[WITH ADP]
PREPARATION
PREPARATION
PREPARATION
Special Service Tools
INFOID:0000000009652698
The actual shapes of Kent-Moore tools may differ from those of special service tools illustrated here.
Commercial Service Tools
INFOID:0000000009652699
Tool number
(Kent-Moore No.)
Tool name
Description
(J-39570)
Chassis ear
Locates the noise
(J-50397)
NISSAN Squeak and Rat-
tle Kit
Repairs the cause of noise
SIIA0993E
SIIA0994E
Tool name
Description
Remover tool
Remove the clip, pawl and metal clip
JMKIA3050ZZ
COMPONENT PARTS
MIR-5
< SYSTEM DESCRIPTION >
[WITH ADP]
C
D
E
F
G
H
I
J
K
M
A
B
MIR
N
O
P
SYSTEM DESCRIPTION
COMPONENT PARTS
Component Parts Location
INFOID:0000000009652700
Door Mirror Remote Control Switch
INFOID:0000000009652701
MIRROR SWITCH
It transmits mirror face adjust operation to automatic drive positioner control unit.
CHANGEOVER SWITCH
No.
Component parts
Function
1.
BCM
The ignition switch signal (ACC/ON) is transmitted to driver seat control unit
via CAN communication.
Refer to
BCS-4, "BODY CONTROL SYSTEM : Component Parts Location"
for detailed installation location.
2.
Automatic drive positioner control unit
Door mirror is supplied with power after receiving the input of mirror switch
and changeover switch.
Refer to
ADP-8, "Automatic Drive Positioner Control Unit"
for detailed instal-
lation location.
3.
TCM
The CVT shift position signal is transmitted to driver seat control unit via CAN
communication.
Refer to
TM-10, "CVT CONTROL SYSTEM : Component Parts Location"
for
detailed installation location.
4.
Door mirror remote control switch
Refer to
MIR-5, "Door Mirror Remote Control Switch"
.
5.
Door mirror (driver side)
Refer to
6.
Driver seat control unit
The ignition switch signal (ACC/ON) is transmitted to automatic drive posi-
tioner control unit via UART communication.
Refer to
ADP-8, "Driver Seat Control Unit"
for detailed installation location.
7.
Auto anti-dazzling inside mirror
Refer to
MIR-6, "Auto Anti-dazzling Inside Mirror"
.
JMLIA2141ZZ
MIR-6
< SYSTEM DESCRIPTION >
[WITH ADP]
COMPONENT PARTS
It transmits the LH/RH control of door mirror that supplies power to automatic drive positioner control unit.
Door Mirror
INFOID:0000000009652702
It makes mirror face operate from side to side and up and down via integrated motor.
Auto Anti-dazzling Inside Mirror
INFOID:0000000009652703
It automatically changes the light transmittance according to the brightness of the light from the headlight of
the vehicle behind.
SYSTEM
MIR-7
< SYSTEM DESCRIPTION >
[WITH ADP]
C
D
E
F
G
H
I
J
K
M
A
B
MIR
N
O
P
SYSTEM
DOOR MIRROR SYSTEM
DOOR MIRROR SYSTEM : System Description
INFOID:0000000009652704
SYSTEM DIAGRAM
MANUAL FUNCTION
Description
• Automatic drive positioner control unit controls door mirror.
• Automatic drive positioner control unit inputs changeover switch signal and perform the LH/RH control of
door mirror motor supplying electric power when changeover switch is operated.
• Automatic drive positioner control unit inputs mirror switch signal and supplies electric power to door mirror.
• The ignition switch signal (ACC/ON) is transmitted from BCM to driver seat control unit via CAN communica-
tion and from driver seat control unit to automatic drive positioner control unit via UART communication.
Operation Conditions
If the following conditions are not satisfied, operation is not performed.
• Ignition switch: ON or ACC
• Changeover switch: Select either left or right
REVERSE INTERLOCK DOOR MIRROR SYSTEM
Description
• Select either of the door mirror faces by changeover switch, and then set mirror face downward.
• When ignition switch is ON position and CVT shift selector is in R position, TCM sends the R signal to driver
seat control unit.
• The R signal is transmitted to automatic drive positioner control unit from driver seat control unit via UART
communication.
• When the R signal is detected, automatic drive positioner control unit activated mirror motor.
Operation Conditions
If the following conditions are not satisfied, operation is not performed.
• Ignition switch: ON
• Changeover switch: Select either left or right
• CVT shift selector: R position
JMLIA2115GB
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст