Nissan Quest E52. Instruction — part 798
INL-72
< REMOVAL AND INSTALLATION >
FOOT LAMP
FOOT LAMP
DRIVER SIDE
DRIVER SIDE : Exploded View
INFOID:0000000009653499
DRIVER SIDE : Replacement
INFOID:0000000009653500
CAUTION:
• Disconnect the battery negative terminal or remove power circuit fuse while performing the opera-
tion to electric leakage.
• Never touch the glass surface of the bulb with bare hands or allow oil or grease to get on it to pre-
vent damage to the bulb.
• Never touch the glass surface of the bulb with bare hands because the surface is very hot just after
the lamp is turned OFF to prevent a burns.
• Leaving the bulb removed from housing for a long period of time can deteriorate performance of the
lens and reflector (causing dirty or clouding). Always prepare a new bulb and have it on hand when
replacing the bulb.
FOOT LAMP BULB (DRIVER SIDE)
1.
Remove instrument lower panel LH. Refer to
IP-14, "Removal and Installation"
.
1.
Instrument lower panel LH
2.
Lamp housing
3.
Bulb & socket assembly
: Pawl
: Vehicle front
JMLIA2178ZZ
FOOT LAMP
INL-73
< REMOVAL AND INSTALLATION >
C
D
E
F
G
H
I
J
K
M
A
B
INL
N
O
P
2.
Rotate the bulb & socket assembly counterclockwise and unlock
it and then remove bulb & socket assembly.
PASSENGER SIDE
PASSENGER SIDE : Exploded View
INFOID:0000000009653501
PASSENGER SIDE : Replacement
INFOID:0000000009653502
CAUTION:
• Disconnect the battery negative terminal or remove power circuit fuse while performing the opera-
tion to electric leakage.
• Never touch the glass surface of the bulb with bare hands or allow oil or grease to get on it to pre-
vent damage to the bulb.
• Never touch the glass surface of the bulb with bare hands because the surface is very hot just after
the lamp is turned OFF to prevent a burns.
• Leaving the bulb removed from housing for a long period of time can deteriorate performance of the
lens and reflector (causing dirty or clouding). Always prepare a new bulb and have it on hand when
replacing the bulb.
FOOT LAMP BULB (PASSENGER SIDE)
JMLIA1528ZZ
1.
Instrument lower panel RH
2.
Lamp housing
3.
Bulb& socket assembly
: Pawl
: Vehicle front
JMLIA2179ZZ
INL-74
< REMOVAL AND INSTALLATION >
FOOT LAMP
1.
Remove instrument lower panel RH. Refer to
IP-14, "Removal and Installation"
2.
Rotate the bulb & socket assembly counterclockwise and unlock
it and then remove bulb & socket assembly.
JMLIA1528ZZ
STEP LAMP
INL-75
< REMOVAL AND INSTALLATION >
C
D
E
F
G
H
I
J
K
M
A
B
INL
N
O
P
STEP LAMP
Exploded View
INFOID:0000000009653503
Removal and Installation
INFOID:0000000009653504
CAUTION:
Disconnect the battery negative terminal or remove power circuit fuse while performing the operation
to electric leakage.
REMOVAL
1.
Disengage step lamp assembly fixing pawls with a remover tool
(A).
CAUTION:
Apply protective tape (B) on the part to protect it from dam-
age.
2.
Disconnect harness connector, and then remove step lamp
assembly.
INSTALLATION
Install in the reverse order of removal.
Replacement
INFOID:0000000009653505
CAUTION:
• Disconnect the battery negative terminal or remove power circuit fuse while performing the opera-
tion to electric leakage.
• Never touch the glass surface of the bulb with bare hands or allow oil or grease to get on it to pre-
vent damage to the bulb.
• Never touch the glass surface of the bulb with bare hands because the surface is very hot just after
the lamp is turned OFF to prevent a burns.
• Leaving the bulb removed from housing for a long period of time can deteriorate performance of the
lens and reflector (causing dirty or clouding). Always prepare a new bulb and have it on hand when
replacing the bulb.
STEP LAMP BULB
1.
Step lamp assembly
2.
Bulb
: Pawl
JMLIA1423ZZ
: Pawl
JMLIA1529ZZ
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст