Nissan Quest E52. Instruction — part 797
INL-68
< REMOVAL AND INSTALLATION >
MAP LAMP
• Never touch the glass surface of the bulb with bare hands because the surface is very hot just after
the lamp is turned OFF to prevent a burns.
• Leaving the bulb removed from housing for a long period of time can deteriorate performance of the
lens and reflector (causing dirty or clouding). Always prepare a new bulb and have it on hand when
replacing the bulb.
MAP LAMP BULB
1.
Disengage lens fixing pawls with a remover tool (A).
2.
Remove bulb.
: Pawl
JMLIA1526ZZ
VANITY MIRROR LAMP
INL-69
< REMOVAL AND INSTALLATION >
C
D
E
F
G
H
I
J
K
M
A
B
INL
N
O
P
VANITY MIRROR LAMP
Exploded View
INFOID:0000000009653495
Replacement
INFOID:0000000009653496
CAUTION:
• Disconnect the battery negative terminal or remove power circuit fuse while performing the opera-
tion to electric leakage.
• Never touch the glass surface of the bulb with bare hands or allow oil or grease to get on it to pre-
vent damage to the bulb.
• Never touch the glass surface of the bulb with bare hands because the surface is very hot just after
the lamp is turned OFF to prevent a burns.
• Leaving the bulb removed from housing for a long period of time can deteriorate performance of the
lens and reflector (causing dirty or clouding). Always prepare a new bulb and have it on hand when
replacing the bulb.
VANITY MIRROR LAMP
1.
Disengage lens fixing pawls with a remover tool (A).
CAUTION:
Apply protective tape (B) on the part to protect it from dam-
age.
2.
Remove bulb.
1.
Lens
2.
Bulb
: Pawl
JMLIA1419ZZ
: Pawl
JMLIA1527ZZ
INL-70
< REMOVAL AND INSTALLATION >
GLOVE BOX LAMP
GLOVE BOX LAMP
Exploded View
INFOID:0000000009653497
Replacement
INFOID:0000000009653498
CAUTION:
• Disconnect the battery negative terminal or remove power circuit fuse while performing the opera-
tion to electric leakage.
• Never touch the glass surface of the bulb with bare hands or allow oil or grease to get on it to pre-
vent damage to the bulb.
• Never touch the glass surface of the bulb with bare hands because the surface is very hot just after
the lamp is turned OFF to prevent a burns.
• Leaving the bulb removed from housing for a long period of time can deteriorate performance of the
lens and reflector (causing dirty or clouding). Always prepare a new bulb and have it on hand when
replacing the bulb.
GLOVE BOX LAMP BULB
1.
Remove Instrument lower panel RH. Refer to
IP-14, "Removal and Installation"
.
1.
Bulb & socket assembly
2.
Lamp housing
3.
Instrument lower panel RH
: Pawl
: Vehicle front
JMLIA2177ZZ
GLOVE BOX LAMP
INL-71
< REMOVAL AND INSTALLATION >
C
D
E
F
G
H
I
J
K
M
A
B
INL
N
O
P
2.
Rotate the bulb & socket assembly counterclockwise and unlock
it and then remove bulb & socket assembly.
JMLIA1528ZZ
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст