Nissan Quest E52. Instruction — part 816
INSTRUMENT PANEL ASSEMBLY
IP-13
< REMOVAL AND INSTALLATION >
C
D
E
F
G
H
I
K
L
M
A
B
IP
N
O
P
INSTRUMENT FINISHER
1.
Instrument upper garnish
2.
Sunload sensor
3.
Optical sensor
4.
Speaker grille LH
5.
Front squawker LH
6.
Instrument side finisher LH
7.
Combination meter
8.
Cluster lid A
9.
Socket and bulb
10. Foot well lamp LH
11.
Instrument lower panel LH
12. Fuse block lid
13. Steering column upper cover
14. Steering column lower cover
15. Instrument lower cover LH
16. Socket inner case
17. Socket knob
18. Instrument lower cover center
(With NAVI)
19. Instrument lower cover center
(Without NAVI)
20. Instrument lower cover RH
21. Glove box assembly
22. Instrument lower panel RH
23. Glove box lamp
24. Socket and bulb
25. Socket and bulb
26. Foot well lamp RH
27. Glove box damper
28. Instrument side finisher RH
29. Instrument panel assembly
30. Front squawker RH
31. Speaker grille RH
32. Instrument bracket
33. Center speaker grille
34. Center squawker
35. Front display unit (With NAVI)
36. Cluster lid D (With NAVI)
37. Cluster lid C (With NAVI)
38. Cluster lid D (Without NAVI)
39. Cluster lid C (Without NAVI)
40. Instrument lower panel center
41. Cup holder assembly
42. Disc eject switch (With NAVI)
43. AV C/U (With NAVI)
44. Steering member lower bracket
45. Instrument stay LH
46. Instrument stay RH
47. Front passenger air bag module
: Clip
: Pawl
: Metal clip
: Always replace after every disassembly.
: N·m (kg-m, ft-lb)
JMJIA6130ZZ
IP-14
< REMOVAL AND INSTALLATION >
INSTRUMENT PANEL ASSEMBLY
Removal and Installation
INFOID:0000000009650900
WORK STEP
1.
Instrument panel assembly
2.
Instrument finisher B
3.
Hazard switch
4.
NATS antenna amp.
5.
Ignition switch
6.
Instrument finisher A
7.
Instrument finisher C
: Metal clip
PARTS
INSTRU-
MENT
PANEL
ASSEM-
BLY
COMBI-
NATION
METER
AV C/U
FRONT
DISPLAY
INSTRU-
MENT
FINISH-
ER A
INSTRU-
MENT
FINISH-
ER B
INSTRU-
MENT
FINISH-
ER C
Front body side welt LH
[1]
[1]
[1]
[1]
[1]
Instrument side finisher LH
[2]
[2]
[2]
[2]
[2]
Front pillar garnish LH
[3]
Front pillar lower garnish LH
[4]
Speaker grille LH
[5]
Front squawker LH
[6]
Instrument lower cover LH
[7]
[3]
[1]
[3]
[3]
[3]
Instrument lower cover RH
[8]
[4]
[2]
[4]
[4]
[4]
Instrument lower cover center
[9]
[5]
[3]
[5]
[5]
[5]
Instrument lower panel LH
[10]
[6]
[6]
[6]
Instrument finisher A
[11]
[6]
[7]
[7]
Instrument finisher B
[12]
[7]
[7]
Driver air bag module
[13]
Steering wheel
[14]
Steering column covers
[15]
Spiral cable
[16]
Combination switch
[17]
Cluster lid A
[18]
[8]
Combination meter
[19]
[9]
BCM
[20]
Optical sensor
[21]
Sunload sensor
[22]
Front body side welt RH
[23]
Instrument side finisher RH
[24]
[1]
Front pillar garnish RH
[25]
Front pillar lower garnish RH
[26]
Speaker grille RH
[27]
Front Squawker RH
[28]
Disk eject switch
[29]
[4]
Instrument lower panel center
[30]
[8]
AV C/U
[31]
[5]
Instrument finisher C
[32]
[9]
[2]
Selector lever
[33]
[10]
Cluster lid C
[34]
[11]
INSTRUMENT PANEL ASSEMBLY
IP-15
< REMOVAL AND INSTALLATION >
C
D
E
F
G
H
I
K
L
M
A
B
IP
N
O
P
[ ]: Number indicates step in removal procedure.
WARNING:
Before servicing, turn ignition switch OFF, disconnect battery negative terminal and wait 3 minutes or
more.
CAUTION:
When removing, always use a remover tool that is made of plastic.
REMOVAL
1.
Remove front body side welt LH. Refer to
INT-23, "BODY SIDE WELT : Removal and Installation"
2.
Remove instrument side finisher LH.
a.
Insert a remover tool (A) into lower space.
b.
Pull the instrument side finisher LH crosswise, and then disen-
gage the pawls
CAUTION:
Apply protective tape (B) on the part to protect it from dam-
age.
3.
Remove front pillar garnish LH. Refer to
INT-21, "FRONT PILLAR GARNISH : Removal and Installation"
.
4.
Remove front pillar lower garnish LH. Refer to
INT-22, "FRONT PILLAR LOWER GARNISH : Removal
5.
Remove speaker grille LH.
a.
Pull up speaker grille LH, and then disengage pawl.
b.
Pull back speaker grille LH, and then disengage metal clips.
6.
Remove front squawker LH. Refer to the following.
• For Display audio: Refer to
AV-114, "Removal and Installation"
.
• For Base audio with separate display: Refer to
AV-254, "Removal and Installation"
Cluster lid D
[35]
[12]
Front display unit
[36]
[13]
Center speaker grille
[37]
Center squawker
[38]
Glove box lid
[39]
Instrument lower panel RH
[40]
Passenger air bag module connecting har-
ness connector
[41]
Passenger air bag module mounting bolts
and screws
[42]
Cup holder assembly
[43]
Instrument panel assembly
[44]
Instrument upper garnish
[45]
: Pawl
JMJIA6131ZZ
: Pawl
: Metal clip
JMJIA6132ZZ
IP-16
< REMOVAL AND INSTALLATION >
INSTRUMENT PANEL ASSEMBLY
• For Bose audio without navigation: Refer to
AV-409, "Removal and Installation"
.
• For Bose audio with navigation: Refer to
AV-615, "Removal and Installation"
.
7.
Remove instrument lower cover LH.
a.
Insert a remover tool (A) between instrument lower cover LH,
and instrument lower cover center to disengage pawls as shown
in the figure.
b.
Pull back instrument lower cover LH.
CAUTION:
Apply protective tape (B) on the part to protect it from dam-
age.
8.
Remove instrument lower cover RH.
a.
Insert remover tool (A) between instrument lower cover RH, and
instrument lower cover center to disengage the pawls as shown
in the figure.
b.
Pull back instrument lower cover RH, and then disengage clip.
CAUTION:
Apply protective tape (B) on the part to protect it from dam-
age.
9.
Remove instrument lower cover center.
a.
Without NAVI
: Pawl
JMJIA6133ZZ
: Clip
: Pawl
JMJIA6134ZZ
: Pawl
: Metal clip
JMJIA6135ZZ
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст