Nissan Quest E52. Instruction — part 922
MWI
COMBINATION METER
MWI-93
< REMOVAL AND INSTALLATION >
C
D
E
F
G
H
I
J
K
L
M
B
A
O
P
REMOVAL AND INSTALLATION
COMBINATION METER
Exploded View
INFOID:0000000009651542
REMOVAL
.
DISASSEMBLY
Removal and Installation
INFOID:0000000009651543
REMOVAL
1.
Remove the cluster lid A. Refer to
IP-14, "Removal and Installation"
.
2.
Remove screws and connector, and then remove combination meter.
INSTALLATION
Install in the reverse order of removal.
Disassembly and Assembly
INFOID:0000000009651544
DISASSEMBLY
1.
Disengage the pawls (4 on the lower part) of the combination meter.
2.
Insert the removal tool into the clearance (in the order of A, B)
between the front cover and the meter control unit. Remove 4
pawls on the lower side of the front cover by turning the tool
while increasing the clearance.
CAUTION:
Wrap the removal tools with protective tape to prevent
scratches.
3.
Pull the front cover straight to remove it from the unified meter control unit.
CAUTION:
1.
Unified meter control unit
2.
Front cover
JSNIA3340ZZ
JSNIA3427ZZ
MWI-94
< REMOVAL AND INSTALLATION >
COMBINATION METER
• Never touch the display, pointer, the inside of front cover and the printed area of the dial during
the work.
• Keep away from magnetic sources.
• Never damage the front cover.
ASSEMBLY
Install the front cover straight to the unified meter control unit and engage all the pawl.
CAUTION:
• Never touch the display, pointer, the inside of front cover and the printed area of the dial during the
work.
• Keep away from magnetic sources.
• Never damage the front cover.
MWI
METER CONTROL SWITCH
MWI-95
< REMOVAL AND INSTALLATION >
C
D
E
F
G
H
I
J
K
L
M
B
A
O
P
METER CONTROL SWITCH
Exploded View
INFOID:0000000009651545
REMOVAL
.
Removal and Installation
INFOID:0000000009651546
REMOVAL
1.
Remove cluster lid A. Refer to
IP-14, "Removal and Installation"
2.
Disengage the tabs and remove meter control switch.
INSTALLATION
Install in the reverse order of removal.
MWI-96
< REMOVAL AND INSTALLATION >
ILLUMINATION CONTROL SWITCH
ILLUMINATION CONTROL SWITCH
Exploded View
INFOID:0000000009651547
REMOVAL
.
Removal and Installation
INFOID:0000000009651548
REMOVAL
1.
Remove cluster lid A. Refer to
IP-14, "Removal and Installation"
2.
Disengage the tabs and remove illumination control switch.
INSTALLATION
Install in the reverse order of removal.
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст