Nissan Quest E52. Instruction — part 60
AV
TEL ANTENNA
AV-119
< REMOVAL AND INSTALLATION >
[DISPLAY AUDIO]
C
D
E
F
G
H
I
J
K
L
M
B
A
O
P
TEL ANTENNA
Removal and Installation
INFOID:0000000009651975
REMOVAL
1.
Remove cluster lid C. Refer to
IP-14, "Removal and Installation"
2.
Remove TEL adapter unit mounting bracket screws.
3.
Disconnect connector to remove TEL adapter unit, TEL antenna, and bracket as a single unit.
4.
Disconnect connector and remove screws to TEL antenna.
INSTALLATION
Install in the reverse order of removal.
AV-120
< REMOVAL AND INSTALLATION >
[DISPLAY AUDIO]
MICROPHONE
MICROPHONE
Removal and Installation
INFOID:0000000009651976
REMOVAL
1.
Remove map lamp assembly. Refer to
INL-67, "Removal and Installation"
2.
Unhook pawls to remove microphone from map lamp assembly.
CAUTION:
Carefully handle the pawl fixing the microphone to prevent damage to the pawl.
INSTALLATION
Install in the reverse order of removal.
NOTE:
After installing microphone, check that it is securely installed with no backlash.
AV
SATELLITE RADIO ANTENNA
AV-121
< REMOVAL AND INSTALLATION >
[DISPLAY AUDIO]
C
D
E
F
G
H
I
J
K
L
M
B
A
O
P
SATELLITE RADIO ANTENNA
Exploded View
INFOID:0000000009651977
REMOVAL
DISASSEMBLY
Removal and Installation
INFOID:0000000009651978
REMOVAL
1.
Remove rear upper ventilator duct 2. Refer to
.
2.
Disconnect antenna feeder connector.
3.
Remove nut, and remove satellite radio antenna and the cover from the vehicle as a single unit.
INSTALLATION
Install in the reverse order of removal.
CAUTION:
If the satellite radio antenna mounting nut is tightened looser than the specified torque, then this will
lower the sensitivity of the antenna. On the other hand, if the nut is tightened tighter than the specified
torque, then this will deform the roof panel.
Disassembly and Assembly
INFOID:0000000009651979
DISASSEMBLY
Insert cloth-covered driver into gaps between satellite radio antenna and the cover, and remove the cover from
satellite radio antenna.
ASSEMBLY
Assemble in the reverse order of disassembly.
JSNIA3188ZZ
1.
Satellite radio antenna
:
Vehicle front
:
N·m (kg-m, in-fb)
JSNIA3284ZZ
1.
Satellite radio antenna
2.
Cover
:
Pawl
AV-122
< REMOVAL AND INSTALLATION >
[DISPLAY AUDIO]
ANTENNA AMP.
ANTENNA AMP.
Removal and Installation
INFOID:0000000009651980
REMOVAL
1.
Remove rear pillar garnish RH. Refer to
INT-27, "REAR PILLAR GARNISH : Removal and Installation"
2.
Remove screw and disconnect connector, and remove antenna amp.
INSTALLATION
Install in the reverse order of removal.
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст