Nissan Quest E52. Instruction — part 1011
PWO-32
< SYMPTOM DIAGNOSIS >
[AC 120 V OUTLET]
AC 120 V OUTLET MAIN SWITCH INDICATOR DOES NOT TURN ON
AC 120 V OUTLET MAIN SWITCH INDICATOR DOES NOT TURN ON
Diagnosis Procedure
INFOID:0000000009651890
1.
CHECK FAIL-SAFE ACTIVATION
Check if the symptom is caused by a fail-safe operation. Refer to
.
Is fail-safe operating?
YES
>> Repair the part causing fail-safe operation.
NO
>> GO TO 2.
2.
CHECK INVERTER UNIT POWER SUPPLY CIRCUIT
Check inverter unit power supply circuit. Refer to
.
Is the inspection result normal?
YES
>> GO TO 3.
NO
>> Repair or replace the malfunctioning parts.
3.
CHECK AC 120 V OUTLET MAIN SWITCH POWER SUPPLY CIRCUIT
Check AC 120 V outlet main switch power supply circuit. Refer to
.
Is the inspection result normal?
YES
>> GO TO 4.
NO
>> Repair or replace the malfunctioning parts.
4.
CHECK AC 120 V OUTLET MAIN SWITCH INPUT SIGNAL CIRCUIT
Check AC 120 V outlet main switch input signal circuit. Refer to
.
Is the inspection result normal?
YES
>> GO TO 5.
NO
>> Repair or replace the malfunctioning parts.
5.
CHECK AC 120 V OUTLET MAIN SWITCH INDICATOR CIRCUIT
Check AC 120 V outlet main switch indicator circuit. Refer to
.
Is the inspection result normal?
YES
>> Refer to
GI-42, "Intermittent Incident"
.
NO
>> Repair or replace the malfunctioning parts.
PWO
NORMAL OPERATING CONDITION
PWO-33
< SYMPTOM DIAGNOSIS >
[AC 120 V OUTLET]
C
D
E
F
G
H
I
J
K
L
B
A
O
P
N
NORMAL OPERATING CONDITION
Description
INFOID:0000000009651891
Because of modified sine wave output, the AC 120 V outlet may not operate normally for electric appliance of
which electric power consumption is 150 W or less.
• Electric appliances requiring a large amount of electric power consumption at startup (e.g. CRT-based TV,
power tool)
• Measuring instruments for data requiring accuracy (e.g. medical equipment, measuring instrument)
• Microprocessor-controlled appliances (e.g. microprocessor-controlled blanket)
Noise may be caused in radio or TV, depending on an electric appliance.
PWO-34
< REMOVAL AND INSTALLATION >
[AC 120 V OUTLET]
INVERTER UNIT
REMOVAL AND INSTALLATION
INVERTER UNIT
Removal and Installation
INFOID:0000000009651892
REMOVAL
1.
Remove luggage side lower finisher (RH). Refer to
INT-43, "LUGGAGE SIDE LOWER FINISHER :
.
2.
Disconnect inverter unit connector.
3.
Remove mounting bolt.
4.
Remove inverter unit.
INSTALLATION
Install in the reverse order of removal.
PWO
AC 120V OUTLET MAIN SW
PWO-35
< REMOVAL AND INSTALLATION >
[AC 120 V OUTLET]
C
D
E
F
G
H
I
J
K
L
B
A
O
P
N
AC 120V OUTLET MAIN SW
Removal and Installation
INFOID:0000000009651893
REMOVAL
1.
Remove instrument lower panel center. Refer to
IP-14, "Removal and Installation"
2.
Insert remover tool (B) into pawl (A) of instrument lower panel
center and press the pawl toward direction (C) to release the
pawl.
3.
Remove AC 120 V main switch from instrument lower panel
center in direction (D).
INSTALLATION
Install in the reverse order of removal.
JSMIA0457ZZ
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст