Nissan Cube. Instruction — part 446
EXL-58
< DTC/CIRCUIT DIAGNOSIS >
TAIL LAMP CIRCUIT
TAIL LAMP CIRCUIT
Component Function Check
INFOID:0000000009945161
NOTE:
Check the parking lamp circuit if the parking lamp and the tail lamp are not turned ON.
1.
CHECK TAIL LAMP OPERATION
IPDM E/R AUTO ACTIVE TEST
1.
Start IPDM E/R auto active test. Refer to
PCS-10, "Diagnosis Description"
(without Intelligent Key).
2.
Check that the tail lamp is turned ON.
CONSULT ACTIVE TEST
1.
Select “EXTERNAL LAMPS” of IPDM E/R active test item.
2.
With operating the test items, check that the tail lamp is turned ON.
Is the tail lamp turned ON?
YES
>> Tail lamp circuit is normal.
NO
>> Refer to
.
Diagnosis Procedure
INFOID:0000000009945162
1.
CHECK TAIL LAMP OUTPUT VOLTAGE
CONSULT ACTIVE TEST
1.
Disconnect the rear combination lamp connector.
2.
Turn the ignition switch ON.
3.
Select “EXTERNAL LAMPS” of IPDM E/R active test item.
4.
With operating the test items, check the voltage between the IPDM E/R harness connector and the
ground.
Is the measurement value normal?
YES
>> GO TO 2.
NO
>> Replace IPDM E/R.
2.
CHECK TAIL LAMP OPEN CIRCUIT
1.
Turn the ignition switch OFF.
2.
Disconnect IPDM E/R connector.
3.
Check continuity between the IPDM E/R harness connector and the rear combination lamp harness con-
nector.
TAIL
: Tail lamp ON
Off
: Tail lamp OFF
Terminals
Test item
Voltage
(Approx.)
(+)
(
−
)
IPDM E/R
Ground
EXTERNAL
LAMPS
Connector
Terminal
RH
E14
38
TAIL
Battery volt-
age
Off
0 V
LH
41
TAIL
Battery volt-
age
Off
0 V
TAIL LAMP CIRCUIT
EXL-59
< DTC/CIRCUIT DIAGNOSIS >
C
D
E
F
G
H
I
J
K
M
A
B
EXL
N
O
P
Does continuity exist?
YES
>> GO TO 3.
NO
>> Repair the harnesses or connectors.
3.
CHECK TAIL LAMP GROUND OPEN CIRCUIT
Check continuity between the rear combination lamp harness connector and the ground.
Does continuity exist?
YES
>> Replace the rear combination lamp.
NO
>> Repair the harnesses or connectors.
IPDM E/R
Rear combination lamp
Continuity
Connector
Terminal
Connector
Terminal
RH
E14
38
B59
6
Existed
LH
41
B80
6
Rear combination lamp
Ground
Continuity
Connector
Terminal
RH
B59
3
Existed
LH
B80
3
EXL-60
< DTC/CIRCUIT DIAGNOSIS >
REAR SIDE MARKER LAMP CIRCUIT
REAR SIDE MARKER LAMP CIRCUIT
Component Function Check
INFOID:0000000009945163
NOTE:
Check the parking lamp circuit if the parking lamp and the rear side marker lamp are not turned ON.
1.
CHECK REAR SIDE MARKER LAMP OPERATION
IPDM E/R AUTO ACTIVE TEST
1.
Start IPDM E/R auto active test. Refer to
PCS-10, "Diagnosis Description"
(without Intelligent Key).
2.
Check that the rear side marker lamp is turned ON.
CONSULT ACTIVE TEST
1.
Select "EXTERNAL LAMPS" of IPDM E/R active test item.
2.
With operating the test items, check that the rear side marker lamp is turned ON.
Is the rear side marker lamp turned ON/OFF?
YES
>> Rear side marker lamp circuit is normal.
NO
>> Refer to
.
Diagnosis Procedure
INFOID:0000000009945164
1.
CHECK REAR SIDE MARKER LAMP BULB
Check the applicable lamp bulb.
Is the bulb normal?
YES
>> GO TO 2.
NO
>> Replace the bulb.
2.
CHECK REAR SIDE MARKER LAMP OPEN CIRCUIT
1.
Turn the ignition switch OFF.
2.
Disconnect IPDM E/R connector and the rear side marker lamp connector.
3.
Check continuity between the IPDM E/R harness connector and the rear side marker lamp harness con-
nector.
Does continuity exist?
YES
>> GO TO 3.
NO
>> Repair the harnesses or connectors.
3.
CHECK REAR SIDE MARKER LAMP GROUND OPEN CIRCUIT
Check continuity between the rear side marker lamp harness connector and the ground.
Does continuity exist?
YES
>> Replace the rear side marker lamp assembly.
NO
>> Repair the harnesses or connectors.
TAIL
: Rear side marker lamp ON
Off
: Rear side marker lamp OFF
IPDM E/R
Rear side marker lamp
Continuity
Connector
Terminal
Connector
Terminal
RH
E14
41
T5
1
Existed
LH
T4
1
Rear side marker lamp
Ground
Continuity
Connector
Terminal
RH
T5
1
Existed
LH
T4
1
LICENSE PLATE LAMP CIRCUIT
EXL-61
< DTC/CIRCUIT DIAGNOSIS >
C
D
E
F
G
H
I
J
K
M
A
B
EXL
N
O
P
LICENSE PLATE LAMP CIRCUIT
Component Function Check
INFOID:0000000009945165
NOTE:
Check the parking lamp circuit if the parking lamp and the license plate lamp are not turned ON.
1.
CHECK LICENSE PLATE LAMP OPERATION
IPDM E/R AUTO ACTIVE TEST
1.
Start IPDM E/R auto active test. Refer to
PCS-10, "Diagnosis Description"
(with Intelligent Key) or
(without Intelligent Key).
2.
Check that the license plate lamp is turned ON.
CONSULT ACTIVE TEST
1.
Select “EXTERNAL LAMPS” of IPDM E/R active test item.
2.
With operating the lighting switch, check that the license plate lamp is turned ON.
Is the license plate lamp turned ON?
YES
>> License plate lamp circuit is normal.
NO
>> Refer to
.
Diagnosis Procedure
INFOID:0000000009945166
1.
CHECK LICENSE PLATE LAMP BULB
Check the applicable lamp bulb.
Is the bulb normal?
YES
>> GO TO 2.
NO
>> Replace the bulb.
2.
CHECK LICENSE PLATE LAMP OPEN CIRCUIT
1.
Turn the ignition switch OFF.
2.
Disconnect IPDM E/R connector and the license plate lamp connector.
3.
Check continuity between the IPDM E/R harness connector and the license plate lamp harness connec-
tor.
Does continuity exist?
YES
>> GO TO 3.
NO
>> Repair the harnesses or connectors.
3.
CHECK LICENSE PLATE LAMP GROUND OPEN CIRCUIT
Check continuity between the license plate lamp harness connector and the ground.
Does continuity exist?
YES
>> Replace the license plate lamp.
NO
>> Repair the harnesses or connectors.
TAIL
: License plate lamp ON
Off
: License plate lamp OFF
IPDM E/R
License plate lamp
Continuity
Connector
Terminal
Connector
Terminal
RH
E14
41
T3
1
Existed
LH
T2
1
License plate lamp
Ground
Continuity
Connector
Terminal
RH
T3
2
Existed
LH
T2
2
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст