Nissan Cube. Instruction — part 61
BCS
SHIPPING MODE CANCEL OPERATION
BCS-93
< BASIC INSPECTION >
[WITHOUT INTELLIGENT KEY SYSTEM]
C
D
E
F
G
H
I
J
K
L
B
A
O
P
N
SHIPPING MODE CANCEL OPERATION
Description
INFOID:0000000009949754
SYSTEM DIAGRAM
DESCRIPTION
• The combination meter transmits meter CAN signal*
1
to BCM via CAN communication, when the extended
storage fuse switch is ON.
• BCM switches the status (shipping mode or normal mode) by itself according to the meter CAN signal*
1
from
combination meter, and transmits shipping mode status signal to combination meter via CAN communica-
tion.
• The combination meter displays extended storage fuse warning message*
2
on the odometer display, when
BCM is in shipping mode.
• BCM control functions are limited in shipping mode. Refer to
.
*1: Odometer signal, wake up signal and each signal.
*2: When shipping mode function operates, “SHIP
→
PHASE
→
On
→
PUSH
→
FUSE In” is displayed.
Work Procedure
INFOID:0000000009949755
1.
TRANSIT MODE CANCEL OPERATION
1.
Turn ignition switch OFF.
2.
Push in (switch on) the extended storage fuse switch. Refer to
3.
Turn ignition switch ON.
4.
Turn ignition switch OFF and wait at least 2seconds.
>> GO TO 2.
2.
TRANSIT MODE CANCEL CHECK
1.
Turn ignition switch ON.
2.
Check that extended storage fuse warning message is not displays on odometer display.
>> WORK END
JMMIA1311GB
BCS-94
< SYSTEM DESCRIPTION >
[WITHOUT INTELLIGENT KEY SYSTEM]
BODY CONTROL SYSTEM
SYSTEM DESCRIPTION
BODY CONTROL SYSTEM
System Description
INFOID:0000000009949756
OUTLINE
• BCM (Body Control Module) controls various electrical components. It receives the information required
from CAN communication and the signals received from each switch and sensor.
• BCM has a combination switch reading function for reading the status of combination switches (light, turn
signal, wiper and washer) in addition to functions for controlling the operation of various electrical compo-
nents. It also has a signal transmission function, for other systems, and a power consumption control func-
tion that reduces the power consumption with the ignition switch OFF.
• BCM is equipped with a diagnosis function that operates with CONSULT and allows for various settings to
be changed.
BCM FUNCTION LIST
System
Reference page
Combination switch reading system
Signal buffer system
Power consumption control system
Headlamp system
Turn signal and hazard warning lamp system
Parking, license plate, side maker and tail lamps system
Exterior lamp battery saver system
Interior room lamp control system
Interior room lamp battery saver system
Illumination control system
Front wiper and washer system
Rear wiper and washer system
Instruction air conditioner system
Warning chime system
WCS-5, "WARNING CHIME SYSTEM : System Diagram"
Power door lock system
Nissan vehicle immobilizer system-NATS (NVIS)
Vehicle security system
Panic alarm
Rear window defogger system
Remote keyless entry system
Power window system
Retained accessory power (RAP) system
Tire pressure monitor system (TPMS) - AIR PRESSURE MON-
ITOR
WT-8, "TIRE PRESSURE MONITORING SYSTEM : System De-
scription"
BCS
BODY CONTROL SYSTEM
BCS-95
< SYSTEM DESCRIPTION >
[WITHOUT INTELLIGENT KEY SYSTEM]
C
D
E
F
G
H
I
J
K
L
B
A
O
P
N
Component Parts Location
INFOID:0000000009949757
1.
BCM
A.
Behind of instrument lower panel LH
(Left side)
JPMIA1514ZZ
BCS-96
< SYSTEM DESCRIPTION >
[WITHOUT INTELLIGENT KEY SYSTEM]
COMBINATION SWITCH READING SYSTEM
COMBINATION SWITCH READING SYSTEM
System Diagram
INFOID:0000000009949758
System Description
INFOID:0000000009949759
OUTLINE
• BCM reads the status of the combination switch (light, turn signal, wiper and washer) and recognizes the
status of each switch.
• BCM has a combination of 5 output terminals (OUTPUT 1 - 5) and 5 input terminals (INPUT 1 - 5). It reads a
maximum of 20 switch status.
COMBINATION SWITCH MATRIX
Combination switch circuit
Combination switch INPUT-OUTPUT system list
JMMIA1037GB
System
INPUT 1
INPUT 2
INPUT 3
INPUT 4
INPUT 5
OUTPUT 1
—
FR WASHER
FR WIPER LOW
TURN LH
TURN RH
OUTPUT 2
FR WIPER HI
—
FR WIPER INT
PASSING
HEADLAMP 1
OUTPUT 3
INT VOLUME 1
RR WASHER
—
HEADLAMP 2
HI BEAM
JMMIA1038GB
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст