Nissan Cube. Instruction — part 443
EXL-46
< DTC/CIRCUIT DIAGNOSIS >
FRONT FOG LAMP CIRCUIT
FRONT FOG LAMP CIRCUIT
Component Function Check
INFOID:0000000009945145
1.
CHECK FRONT FOG LAMP OPERATION
IPDM E/R AUTO ACTIVE TEST
1.
Start IPDM E/R auto active test. Refer to
PCS-10, "Diagnosis Description"
2.
Check that the front fog lamp is turned ON.
CONSULT ACTIVE TEST
1.
Select “EXTERNAL LAMPS” of IPDM E/R active test item.
2.
With operating the test items, check that the front fog lamp is turned ON.
Is the front fog lamp turned ON?
YES
>> Front fog lamp circuit is normal.
NO
>> Refer to
.
Diagnosis Procedure
INFOID:0000000009945146
1.
CHECK FRONT FOG LAMP FUSE
1.
Turn the ignition switch OFF.
2.
Check that the following fuse is not fusing.
Is the fuse fusing?
YES
>> GO TO 2.
NO
>> GO TO 3.
2.
CHECK FRONT FOG LAMP SHORT CIRCUIT
1.
Disconnect IPDM E/R connector and the front fog connector.
2.
Check continuity between the IPDM E/R harness connector and the ground.
Does continuity exist?
YES
>> Repair the harnesses or connectors. And then replace the fuse.
NO
>> Replace the fuse. (Replace IPDM E/R if the fuse is fusing again.)
3.
CHECK FRONT FOG LAMP BULB
Check the applicable lamp bulb.
Is the bulb normal?
YES
>> GO TO 4.
NO
>> Replace the bulb.
4.
CHECK FRONT FOG LAMP OUTPUT VOLTAGE
CONSULT ACTIVE TEST
1.
Disconnect the front fog lamp connector.
2.
Turn the ignition switch ON.
3.
Select “EXTERNAL LAMPS” of IPDM E/R active test item.
Fog
: Front fog lamp ON
Off
: Front fog lamp OFF
Unit
Location
Fuse No.
Capacity
Front fog lamp
IPDM E/R
#50
15 A
IPDM E/R
Ground
Continuity
Connector
Terminal
RH
E12
21
Not existed
LH
22
FRONT FOG LAMP CIRCUIT
EXL-47
< DTC/CIRCUIT DIAGNOSIS >
C
D
E
F
G
H
I
J
K
M
A
B
EXL
N
O
P
4.
With operating the test items, check the voltage between the IPDM E/R harness connector and the
ground.
Is the measurement value normal?
YES
>> GO TO 5.
NO
>> Replace IPDM E/R.
5.
CHECK FRONT FOG LAMP OPEN CIRCUIT
1.
Turn the ignition switch OFF.
2.
Disconnect IPDM E/R connector.
3.
Check continuity between the IPDM E/R harness connector and the front fog lamp harness connector.
Does continuity exist?
YES
>> GO TO 6.
NO
>> Repair the harnesses or connectors.
6.
CHECK FRONT FOG LAMP GROUND CIRCUIT OPEN CIRCUIT
Check continuity between the front fog lamp harness connector and the ground.
Does continuity exist?
YES
>> Replace the front fog lamp.
NO
>> Repair the harnesses or connectors.
Terminals
Test item
Voltage
(Approx.)
(+)
(
−
)
IPDM E/R
Ground
EXTERNAL
LAMPS
Connector
Terminal
RH
E12
21
Fog
Battery
voltage
Off
0 V
LH
22
Fog
Battery
voltage
Off
0 V
IPDM E/R
Front fog lamp
Continuity
Connector
Terminal
Connector
Terminal
RH
E12
21
E48
1
Existed
LH
22
E30
1
Front fog lamp
Ground
Continuity
Connector
Terminal
RH
E48
2
Existed
LH
E30
2
EXL-48
< DTC/CIRCUIT DIAGNOSIS >
PARKING LAMP CIRCUIT
PARKING LAMP CIRCUIT
Component Function Check
INFOID:0000000009945151
1.
CHECK PARKING LAMP OPERATION
IPDM E/R AUTO ACTIVE TEST
1.
Start IPDM E/R auto active test. Refer to
PCS-10, "Diagnosis Description"
(without Intelligent Key).
2.
Check that the parking lamp is turned ON.
CONSULT ACTIVE TEST
1.
Select “EXTERNAL LAMPS” of IPDM E/R active test item.
2.
With operating the test items, check that the parking lamp is turned ON.
Is the parking lamp turned ON?
YES
>> Parking lamp circuit is normal.
NO
>> Refer to
.
Diagnosis Procedure
INFOID:0000000009945152
1.
CHECK PARKING LAMP FUSE
1.
Turn the ignition switch OFF.
2.
Check that the following fuses are not fusing.
Is the fuse fusing?
YES
>> GO TO 2.
NO
>> GO TO 3.
2.
CHECK PARKING LAMP SHORT CIRCUIT
1.
Disconnect IPDM E/R connector and the parking lamp connector.
2.
Check continuity between the IPDM E/R harness connector and the ground.
Does continuity exist?
YES
>> Repair the harnesses or connectors. And then replace the fuse.
NO
>> Replace the fuse. (Replace IPDM E/R if fusing is found again.)
3.
CHECK PARKING LAMP BULB
Check the applicable lamp bulb.
Is the bulb normal?
YES
>> GO TO 4.
NO
>> Replace the bulb.
4.
CHECK PARKING LAMP OUTPUT VOLTAGE
CONSULT ACTIVE TEST
TAIL
: Parking lamp ON
Off
: Parking lamp OFF
Unit
Location
Fuse No.
Capacity
• Parking lamp
• License plate lamp
• Side marker lamp
• Tail lamp
IPDM E/R
#47
10 A
IPDM E/R
Ground
Continuity
Connector
Terminal
RH
E14
37
Not existed
LH
36
PARKING LAMP CIRCUIT
EXL-49
< DTC/CIRCUIT DIAGNOSIS >
C
D
E
F
G
H
I
J
K
M
A
B
EXL
N
O
P
1.
Disconnect the parking lamp connector.
2.
Turn the ignition switch ON.
3.
Select “EXTERNAL LAMPS” of IPDM E/R active test item.
4.
With operating the test items, check the voltage between the IPDM E/R harness connector and the
ground.
Is the measurement value normal?
YES
>> GO TO 5.
NO
>> Replace IPDM E/R.
5.
CHECK PARKING LAMP OPEN CIRCUIT
1.
Turn the ignition switch OFF.
2.
Disconnect IPDM E/R connector.
3.
Check continuity between the IPDM E/R harness connector and the parking lamp harness connector.
Does continuity exist?
YES
>> GO TO 6.
NO
>> Repair the harnesses or connectors.
6.
CHECK PARKING LAMP GROUND OPEN CIRCUIT
Check continuity between the parking lamp harness connector and the ground.
Does continuity exist?
YES
>> Replace the front combination lamp.
NO
>> Repair the harnesses or connectors.
Terminals
Test item
Voltage
(Approx.)
(+)
(
−
)
IPDM E/R
Ground
EXTERNAL
LAMPS
Connector
Terminal
RH
E14
37
TAIL
Battery
voltage
LH
36
OFF
0 V
IPDM E/R
Parking lamp
Continuity
Connector
Terminal
Connector
Terminal
RH
E14
37
E43
1
Existed
LH
36
E24
1
Parking lamp
Ground
Continuity
Connector
Terminal
RH
E43
2
Existed
LH
E24
2
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст