Nissan March K13. Instruction — part 418
FRONT DOOR FINISHER
INT-15
< REMOVAL AND INSTALLATION >
C
D
E
F
G
H
I
K
L
M
A
B
INT
N
O
P
4.
Insert a remover tool (A) between power window switch finisher
(1) and front door finisher (2) to disengage fixing pawls.
CAUTION:
Apply protective tape (B) to the front door finisher to pro-
tect from damage.
5.
Remove power window switch finisher, and then disconnect power window switch harness connector.
6.
Remove front door finisher fixing screw.
7.
Insert remover tool (A) between front door panel (1) and front
door finisher (2) to disengage the fixing clips and metal clips.
CAUTION:
Insert remover tool into part shown in the figure.
(Between clips and door panel).
8.
Remove front door finisher from front door panel.
Instruction window models
1.
Fully open door window.
2.
Remove door mirror corner cover. Refer to
MIR-35, "DOOR MIRROR ASSEMBLY : Removal and Installa-
3.
Remove regulator handle.
NOTE:
Insert hook and pick tool (A) between regulator handle (1) and
regulator sealer to remove snap pin (2).
4.
Remove door pull handle fixing TORX screw with a screwdriver
(A).
:Pawl
JMJIA4086ZZ
: Clip
: Metal clip
JMJIA4087ZZ
JMJIA0491ZZ
JMJIA4096ZZ
INT-16
< REMOVAL AND INSTALLATION >
FRONT DOOR FINISHER
5.
Insert a remover tool (A) between door pull handle (1) and front
door finisher (2) to disengage fixing pawls and then remove door
pull handle.
CAUTION:
Apply protective tape (B) to the front door finisher to pro-
tect from damage.
6.
Remove front door finisher fixing screw.
7.
Insert remover tool (A) between front door panel (1) and front
door finisher (2) to disengage the fixing clips and metal clips.
CAUTION:
Insert remover tool into part shown in the figure.
(Between clips and door panel).
8.
Remove front door finisher from front door panel.
INSTALLATION
Note the following item,and nstall in the reverse order of removal.
CAUTION:
When installing front door finisher, check that all clips and metal clips are securely fitted in door panel
hole on body, and then press them in.
:Pawl
JMJIA4090ZZ
: Clip
: Metal clip
JMJIA4091ZZ
REAR DOOR FINISHER
INT-17
< REMOVAL AND INSTALLATION >
C
D
E
F
G
H
I
K
L
M
A
B
INT
N
O
P
REAR DOOR FINISHER
Exploded View
INFOID:0000000006046522
Power window models
JMJIA4123ZZ
1.
Rear door panel
2.
Rear door inside handle
3.
Power window switch finisher
4.
Hook cover
5.
Rear door finisher
6.
Power window switch finisher bracket
: Clip
: Pawl
: Metal clip
INT-18
< REMOVAL AND INSTALLATION >
REAR DOOR FINISHER
Instruction window models
Removal and Installation
INFOID:0000000006046523
CAUTION:
When removing, always use a remover tool that is made of plastic.
REMOVAL
Power window models
1.
Fully open door window.
2.
Remove power window switch finisher fixing TORX screw with a
screwdriver.
JMJIA4125ZZ
1.
Rear door panel
2.
Rear door inside handle
3.
Power window switch finisher
4.
Hook cover
5.
Rear door finisher
6.
Power window switch finisher bracket
: Clip
: Pawl
: Metal clip
JMJIA4096ZZ
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст