Nissan March K13. Instruction — part 684
FRONT WIPER ARM
WW-53
< REMOVAL AND INSTALLATION >
C
D
E
F
G
H
I
J
K
M
A
B
WW
N
O
P
Standard clearance
R
: 37.1
±
7.5 mm (1.461
±
0.295 in)
L
: 28.4
±
7.5 mm (1.118
±
0.295 in)
JPLIA0136ZZ
WW-54
< REMOVAL AND INSTALLATION >
FRONT WIPER DRIVE ASSEMBLY
FRONT WIPER DRIVE ASSEMBLY
Exploded View
INFOID:0000000006067398
REMOVAL VIEW
DISASSEMBLY VIEW
Removal and Installation
INFOID:0000000006067399
REMOVAL
1.
Remove front wiper arm (LH and RH). Refer to
.
2.
Remove cowl top cover. Refer to
EXT-15, "Removal and Installation"
.
3.
Disconnect front wiper motor connector.
4.
Remove mounting bolts front wiper drive assembly.
1.
Front wiper arm cap RH
2.
Front wiper arm RH
3.
Front wiper drive
4.
Front wiper motor
5.
Front wiper arm LH
6.
Front wiper blade LH
6.
Front wiper blade (RH)
Refer to
for symbols in the figure.
JMLIA1000GB
1.
Shaft seal
2.
Bracket Front wiper frame
3.
Front wiper motor
4.
Front wiper linkage 2
5.
Front wiper linkage 1
: Multi
−
purpose grease or an equivalent
JMLIA1001ZZ
FRONT WIPER DRIVE ASSEMBLY
WW-55
< REMOVAL AND INSTALLATION >
C
D
E
F
G
H
I
J
K
M
A
B
WW
N
O
P
5.
Remove front wiper drive assembly from the vehicle.
INSTALLATION
1.
Install front wiper drive assembly to the vehicle.
2.
Connect front wiper motor connector.
3.
Operate front wiper to move it to the auto stop position.
4.
Install cowl top cover. Refer to
EXT-15, "Removal and Installation"
.
5.
Install front wiper arms. Refer to
.
Disassembly and Assembly
INFOID:0000000006067400
DISASSEMBLY
1.
Remove front wiper linkage 1 and 2 from the front wiper drive assembly.
CAUTION:
Never bend the linkage or damage the plastic part of the ball joint when removing the front wiper
linkage.
2.
Remove front wiper motor mounting screws, and then remove the front wiper motor from the front wiper
frame.
ASSEMBLY
1.
Connect front wiper motor connector.
2.
Operate front wiper to move it to the auto stop position.
3.
Disconnect front wiper motor connector.
4.
Install front wiper motor to front wiper frame.
5.
Install front wiper linkage 1 to the front wiper motor and the front wiper frame.
6.
Install front wiper linkage 2 to the front wiper frame.
CAUTION:
• Never drop front wiper motor or cause it to come into contact with other parts.
• Be careful for the grease condition at the front wiper motor and front wiper linkage joint
(retainer). Apply multi
−
purpose grease or an equivalent if necessary.
WW-56
< REMOVAL AND INSTALLATION >
WIPER AND WASHER SWITCH
WIPER AND WASHER SWITCH
Exploded View
INFOID:0000000006067403
WW-47, "Removal and Installation"
.
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст