Nissan Primera P12. Instruction — part 76
POWER DOOR LOCK SYSTEM
BL-13
C
D
E
F
G
H
J
K
L
M
A
B
BL
POWER DOOR LOCK SYSTEM
PFP:24814
System Description
EIS005GP
OPERATION
Power is supplied at all times
●
through 10A fuse (No.12, located in the fusible link and fuse box)
●
to smart entrance control unit terminal 56, and
●
to key switch terminal 1,
●
through 40A fusible link (letter B, located in the fusible link and fuse box)
●
to smart entrance control unit terminal 49.
●
through 10A fuse (No. 3, located in the fusible link and fuse box)
●
to trunk release actuator terminal 2 (for sedan models).
●
to back door release actuator terminal 3 (except for sedan models).
Ground is supplied
●
to smart entrance control unit terminal 53
●
through body grounds M16, M50 and M70.
DOOR LOCK AND UNLOCK SWITCH OPERATION
When door lock/unlock switch is in LOCK position, ground is supplied
●
to smart entrance control unit terminal 13
●
through (door lock/unlock switch) terminal 1
●
through (door lock/unlock switch) terminal 3
●
through body grounds M16, M50 and M70.
With power and ground supplied, doors are locked.
When door lock/unlock switch is in UNLOCK position, ground is supplied
●
to smart entrance control unit terminal 14
●
through (door lock/unlock switch) terminal 2
●
through (door lock/unlock switch) terminal 3
●
through body grounds M16, M50 and M70.
With power and ground supplied, all doors are unlocked.
KEY REMINDER SYSTEM
●
If the ignition key is in the ignition key cylinder and driver door is open, setting door lock/unlock switch,
lock knob, key or remote controller to “LOCK” locks the door once but then immediately unlocks all doors.
BL-14
POWER DOOR LOCK SYSTEM
Component Parts and Harness Connector Location
EIS005GQ
SIIA1640E
POWER DOOR LOCK SYSTEM
BL-15
C
D
E
F
G
H
J
K
L
M
A
B
BL
Schematic
EIS005GR
MKWA0094E
BL-16
POWER DOOR LOCK SYSTEM
Wiring Diagram — D/LOCK —
EIS005GS
MKWA0949E
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст