Nissan Versa Sedan. Instruction — part 577
MWI
PREPARATION
MWI-7
< PREPARATION >
[TYPE A]
C
D
E
F
G
H
I
J
K
L
M
B
A
O
P
PREPARATION
PREPARATION
Special Service Tool
INFOID:0000000009601587
The actual shapes of Kent-Moore tools may differ from those of special service tools illustrated here.
Commercial Service Tools
INFOID:0000000009266561
Tool number
(Kent-Moore No.)
Tool name
Description
—
(J-46534)
Trim Tool Set
Removing trim components
AWJIA0483ZZ
Tool name
Description
Power tool
Loosening nuts, screws and bolts
PIIB1407E
MWI-8
< SYSTEM DESCRIPTION >
[TYPE A]
COMPONENT PARTS
SYSTEM DESCRIPTION
COMPONENT PARTS
Component Parts Location
INFOID:0000000009266562
AWNIA2714ZZ
MWI
COMPONENT PARTS
MWI-9
< SYSTEM DESCRIPTION >
[TYPE A]
C
D
E
F
G
H
I
J
K
L
M
B
A
O
P
Component Description
INFOID:0000000009266563
1.
ABS actuator and electric unit (control
unit)
2.
Combination meter
3.
CVT shift selector (O/D OFF switch)
(with CVT)
A/T shift selector (O/D OFF switch)
(with A/T)
4.
Air bag diagnosis sensor unit
(view with center console removed)
5.
Parking brake switch
(view with center console removed)
6.
Seat belt buckle switch LH
7.
Fuel level sensor unit and fuel pump
(view with rear seat and access cover
removed)
8.
Front door switch LH
9.
BCM
(view with instrument panel removed)
10. EPS control unit
(view with instrument lower panel re-
moved)
11. Brake fluid level switch
(view with IPDM E/R removed)
12. ECM
(view with IPDM E/R removed)
13. TCM
14. Oil pressure sensor
15. Washer fluid level switch (if equipped)
Unit
Description
Combination meter
The combination meter controls the following items according to the signals received from each unit.
• Speedometer
• Engine oil pressure gauge
• Warning lamps
• Information display
• Oil pressure sensor signal
• Tachometer
• Fuel gauge
• Indicator lamps
• Warning chime
CVT shift selector (O/D OFF
switch) (with CVT)
A/T shift selector (O/D OFF
switch) (with A/T)
Transmits the overdrive off switch signal to the combination meter.
Seat belt buckle switch (LH)
Transmits the seat belt buckle switch (LH) signal to the combination meter.
ABS actuator and electric unit
(control unit)
Transmits the vehicle speed signal to the combination meter via CAN communication.
Air bag diagnosis sensor unit
Transmits the air bag signal and seat belt buckle switch (RH) signal to the combination meter.
EPS Control unit
Transmits the EPS signal to the combination meter via CAN communication.
TCM
Transmits the shift position signal to the combination meter via CAN communication.
ECM
Transmits the following signals to the combination meter via CAN communication.
• Engine speed signal
• Engine coolant temperature signal
• Fuel consumption monitor signal
• Oil pressure sensor signal
BCM
Transmits the security signal to the combination meter.
Transmits the following signals to the combination meter via CAN communication.
• Low tire pressure warning signal
• Door open switch signal
Washer fluid level switch (if
equipped)
Transmits the washer fluid level switch signal to the combination meter.
Fuel level sensor unit
Transmits the fuel level sensor signal to the combination meter.
Parking brake switch
Transmits the parking brake switch signal to the combination meter.
Brake fluid level switch
Transmits the brake fluid level switch signal to the combination meter.
TCM
Transmits the shift position signal to the combination meter via CAN communication.
Oil pressure sensor
Transmits the oil pressure sensor signal to the ECM.
MWI-10
< SYSTEM DESCRIPTION >
[TYPE A]
SYSTEM
SYSTEM
METER SYSTEM
METER SYSTEM : System Diagram
INFOID:0000000009266564
SYSTEM DIAGRAM
METER SYSTEM : System Description
INFOID:0000000009266565
COMBINATION METER
Combination Meter
• The combination meter monitors signals from switches, sensors and modules to control the following func-
tions:
- Speedometer/Tachometer
- Shift position indicator
- Warning lamps
- Indicator lamps
- Meter illumination control
- Information display
• The combination meter has an integrated buzzer that is activated when it receives a signal from the BCM via
CAN communication. Refer to
WCS-7, "WARNING CHIME SYSTEM : System Description"
for further
details.
• The combination meter includes a self diagnosis function.
• The combination meter can be diagnosed with CONSULT.
METER CONTROL FUNCTION LIST
AWNIA2716GB
System
Description
Reference
Speedometer
Indicates vehicle speed.
Tachometer
Indicates engine speed.
Shift position indicator (with CVT or A/T )
Display shift position.
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст