Nissan Versa Sedan. Instruction — part 578
MWI
SYSTEM
MWI-11
< SYSTEM DESCRIPTION >
[TYPE A]
C
D
E
F
G
H
I
J
K
L
M
B
A
O
P
Warning lamp/
indicator lamp
Oil pressure warning lamp
The warning lamp turns ON when it receives the
oil pressure warning signal.
Seat belt warning lamp
The warning lamp turns ON when the LH seat
belt is unfastened and the vehicle is moving, and
turns OFF when the seat belt is fastened.
High temperature warning lamp
The ECM monitors the engine coolant tempera-
ture sensor and sends a signal to the combina-
tion meter to turn on the high temperature
warning lamp via CAN communication.
Meter illumi-
nation control
Meter illumination control function
Illumination control is enabled when the combi-
nation switch (lighting switch) is in the 1st or 2nd
position changing from daytime mode to night-
time mode.
Meter illumination control switch
The operation of the illumination control switch
changes the brightness of meter illumination.
Information
display
Fuel gauge
Indicates fuel level.
Odo/trip meter
Displays mileage.
Trip computer
Instant fuel consumption
Displays current fuel consumption.
Average fuel consumption
Displays average fuel consumption.
Distance to empty
Displays distance to empty.
System
Description
Reference
MWI-12
< SYSTEM DESCRIPTION >
[TYPE A]
SYSTEM
METER SYSTEM : Arrangement of Combination Meter
INFOID:0000000009266566
METER SYSTEM : Fail-Safe
INFOID:0000000009266567
The combination meter activates the fail-safe control if CAN communication with each unit is malfunctioning.
AWNIA2450GB
MWI
SYSTEM
MWI-13
< SYSTEM DESCRIPTION >
[TYPE A]
C
D
E
F
G
H
I
J
K
L
M
B
A
O
P
SPEEDOMETER
SPEEDOMETER : System Description
INFOID:0000000009266568
SYSTEM DIAGRAM
DESCRIPTION
The ABS actuator and electric unit (control unit) receives each wheel speed sensor signal and provides a vehi-
cle speed signal to the combination meter via CAN communication.
TACHOMETER
Function
Specifications
Speedometer
Reset to zero by suspending communication.
Tachometer
Meter Illumination
When suspending communication, changes to nighttime
mode.
Information dis-
play
Trip computer
Instant fuel consumption
0 km/h is displayed.
Average fuel consumption
• When reception time of an abnormal signal is 2 sec-
onds or less, the last received datum is used for cal-
culation to indicate the result.
• When reception time of an abnormal signal is more
than 2 seconds, the last result calculated during nor-
mal condition is indicated.
Distance to empty
Odo/trip meter
An indicated value is maintained at communications
blackout.
Shift position indicator
The indicator turns OFF by suspending communication.
Buzzer
The buzzer turns off by suspending communication.
Warning lamp/in-
dicator lamp
ABS warning lamp
The lamp turns ON by suspending communication.
EPS warning lamp
Brake warning lamp
Malfunction indicator lamp (MIL)
High water temperature warning lamp
The lamp turns OFF by suspending communication.
High beam indicator lamp
Turn signal indicator lamp
Door warning lamp
Oil pressure warning lamp
O/D OFF indicator lamp
JSNIA2973GB
MWI-14
< SYSTEM DESCRIPTION >
[TYPE A]
SYSTEM
TACHOMETER : System Description
INFOID:0000000009266569
SYSTEM DIAGRAM
DESCRIPTION
The crank position sensor sends a crankshaft position signal to the ECM. The ECM provides an engine speed
signal to the combination meter via CAN communication lines. The tachometer indicates engine speed in rev-
olutions per minute (rpm).
SHIFT POSITION INDICATOR
SHIFT POSITION INDICATOR : System Diagram
INFOID:0000000009266570
WITH CVT
WITH A/T
SHIFT POSITION INDICATOR : System Description
INFOID:0000000009266571
DESCRIPTION
The combination meter receives the shift position signal from TCM via CAN communication, and displays the
position of the shift indicator.
HIGH WATER TEMPERATURE WARNING LAMP
JSNIA2974GB
AWNIA1914GB
AWNIA2715GB
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст