Nissan Versa Sedan. Instruction — part 742
B1033 – B1035 CRASH ZONE SENSOR
SRC-63
< DTC/CIRCUIT DIAGNOSIS >
C
D
E
F
G
I
J
K
L
M
A
B
SRC
N
O
P
B1033 – B1035 CRASH ZONE SENSOR
Description
INFOID:0000000009269163
DTC B1033 – B1035 CRASH ZONE SENSOR
The crash zone sensor is wired to the air bag diagnosis sensor unit. The air bag diagnosis sensor unit will
monitor for opens and shorts in detected lines to the crash zone sensor.
PART LOCATION
SRC-4, "Component Parts Location"
.
DTC Logic
INFOID:0000000009269164
DTC DETECTION LOGIC
With CONSULT
Without CONSULT
DTC CONFIRMATION PROCEDURE (With CONSULT)
1.
CHECK SELF-DIAG RESULT
1. Turn ignition switch ON.
2. Check for DTC using CONSULT.
Is the DTC detected?
YES (Current DTC)>>Refer to
.
YES (Past DTC)>>GO TO 2.
NO
>> Inspection End.
2.
ERASE SELF-DIAG RESULT
Erase the DTC using CONSULT.
Can the DTC be erased?
YES
>> Inspection End.
NO
>> Refer to
DTC CONFIRMATION PROCEDURE (Without CONSULT)
1.
CHECK SELF-DIAG RESULT
1. Turn ignition switch ON.
2. Check the air bag warning lamp status. Refer to
SRC-15, "Trouble Diagnosis without CONSULT"
NOTE:
CONSULT name
DTC
DTC detecting condition
Repair order
CRASH ZONE SEN
[UNIT FAIL]
B1033 Crash zone sensor has malfunctioned.
1.
Visually check the wiring harness connection.
2.
Replace the harness if it has visible damage.
3.
Replace the crash zone sensor.
4.
Replace the air bag diagnosis sensor unit.
5.
Replace the related harness.
B1034
CRASH ZONE SEN
[COMM FAIL]
B1035
Crash zone sensor communication error.
WHIA0200E
SRC-64
< DTC/CIRCUIT DIAGNOSIS >
B1033 – B1035 CRASH ZONE SENSOR
SRS will not enter diagnosis mode if no malfunction is detected in user mode.
Is the DTC detected?
YES
>> Refer to
NO
>> Inspection End.
Diagnosis Procedure
INFOID:0000000009269165
1.
HARNESS CONNECTOR
Visually inspect all applicable harness connectors for the following:
• Visible damage to connector or terminal
• Loose terminal
• Poor connection
NOTE:
All harness connectors should be inspected from the air bag diagnosis unit to the end component (including
any in-line connectors).
Is the inspection result normal?
YES
>> GO TO 2.
NO
>> Perform one of the following repairs:
• Visible damage: Replace the harness.
• Loose terminal: Secure the terminal.
• Poor connection: Secure the connection.
2.
CONFIRM DTC
1. Reconnect all harness connectors.
2. Turn ignition switch ON.
3. Check for DTC using CONSULT.
Is DTC still current?
YES
>> GO TO 3.
NO
>> Refer to
GI-45, "Intermittent Incident"
.
3.
WIRING HARNESS
Check the wiring harness for visible damage
NOTE
.
NOTE:
The entire wiring harness should be inspected from the air bag diagnosis sensor unit to the end component
(including any in-line connectors).
Is the inspection result normal?
YES
>> GO TO 4.
NO
>> Replace the harness.
4.
CONFIRM DTC
1. Reconnect all harness connectors.
2. Turn ignition switch ON.
3. Check for DTC using CONSULT.
Is DTC still current?
YES
>> GO TO 5.
NO
>> Refer to
GI-45, "Intermittent Incident"
.
5.
AIR BAG DIAGNOSIS SENSOR UNIT
1. Replace the air bag diagnosis sensor unit. Refer to
SR-27, "Removal and Installation"
.
2. Turn ignition switch ON.
3. Check for DTC using CONSULT.
Is DTC still current?
YES
>> GO TO 6.
NO
>> Clear DTC. Inspection End.
6.
CRASH ZONE SENSOR
1. Replace the crash zone sensor. Refer to
SR-22, "Removal and Installation"
2. Turn ignition switch ON.
B1033 – B1035 CRASH ZONE SENSOR
SRC-65
< DTC/CIRCUIT DIAGNOSIS >
C
D
E
F
G
I
J
K
L
M
A
B
SRC
N
O
P
3. Check for DTC using CONSULT.
Is DTC still current?
YES
>> GO TO 7.
NO
>> Clear DTC. Inspection End.
7.
RELATED HARNESS
Replace the related harness.
>> END
SRC-66
< DTC/CIRCUIT DIAGNOSIS >
B1118 – B1120 SATELLITE SENSOR LH
B1118 – B1120 SATELLITE SENSOR LH
Description
INFOID:0000000009269166
DTC B1118 – B1120 SATELLITE SENSOR LH
The side air bag satellite sensor LH is wired to the air bag diagnosis sensor unit. The air bag diagnosis sensor
unit will monitor the side air bag satellite sensor LH for internal failures and its circuits for communication
errors.
PART LOCATION
SRC-4, "Component Parts Location"
.
DTC Logic
INFOID:0000000009269167
DTC DETECTION LOGIC
With CONSULT
Without CONSULT
DTC CONFIRMATION PROCEDURE (With CONSULT)
1.
CHECK SELF-DIAG RESULT
1. Turn ignition switch ON.
2. Check for DTC using CONSULT.
Is the DTC detected?
YES (Current DTC)>>Refer to
YES (Past DTC)>>GO TO 2.
NO
>> Inspection End.
2.
ERASE SELF-DIAG RESULT
Erase the DTC using CONSULT.
Can the DTC be erased?
YES
>> Inspection End.
NO
>> Refer to
DTC CONFIRMATION PROCEDURE (Without CONSULT)
1.
CHECK SELF-DIAG RESULT
1. Turn ignition switch ON.
2. Check the air bag warning lamp status. Refer to
SRC-15, "Trouble Diagnosis without CONSULT"
CONSULT name
DTC
DTC detecting condition
Repair order
SATELLITE SENS LH
[UNIT FAIL]
B1118 Side air bag satellite sensor LH has mal-
functioned.
1.
Visually check the wiring harness connection.
2.
Replace the harness if it has visible damage.
3.
Replace the side air bag satellite sensor LH.
4.
Replace the air bag diagnosis sensor unit.
5.
Replace the related harness.
B1119
SATELLITE SENS LH
[COMM FAIL]
B1120
Side air bag satellite sensor LH communi-
cation error.
AWHIA0299GB
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст