Nissan Versa Sedan. Instruction — part 66
BCS
DIAGNOSIS SYSTEM (BCM)
BCS-25
< SYSTEM DESCRIPTION >
[WITH INTELLIGENT KEY SYSTEM]
C
D
E
F
G
H
I
J
K
L
B
A
O
P
N
ACTIVE TEST
WORK SUPPORT
*: Initial setting
TRUNK
TRUNK : CONSULT Function (BCM - TRUNK)
INFOID:0000000009268627
DATA MONITOR
THEFT ALM
THEFT ALM : CONSULT Function (BCM - THEFT)
INFOID:0000000009268628
DATA MONITOR
TRNK/HAT MNTR [On/Off]
Indicates condition of trunk room lamp switch.
RKE-LOCK [On/Off]
Indicates condition of lock signal from Intelligent Key.
RKE-UNLOCK [On/Off]
Indicates condition of unlock signal from Intelligent Key.
Monitor Item [Unit]
Description
Test item
Description
BATTERY SAVER
This test is able to check battery saver operation [On/Off].
Support Item
Setting
Description
BATTERY SAVER SET
ON*
Exterior lamp battery saver function ON.
OFF
Exterior lamp battery saver function OFF.
ROOM LAMP TIMER SET
MODE 3*
10 min.
Sets interior room lamp battery saver timer operating time.
MODE 2
60 min.
MODE 1
15 min.
Monitor Item [Unit]
Description
PUSH SW [On/Off]
Indicates condition of push-button ignition switch.
VEH SPEED 1 [km/h]
Indicates vehicle speed signal received from ABS on CAN communication line.
KEY CYL SW-TR [On/Off]
Indicates condition of trunk key cylinder switch.
TR/BD OPEN SW [On/Off]
Indicates condition of trunk open switch.
TRNK/HAT MNTR [On/Off]
Indicates condition of trunk room lamp switch.
RKE-TR/BD [On/Off]
Indicates condition of trunk open signal from Intelligent Key.
Monitored Item
Description
REQ SW -DR [On/Off]
Indicates condition of door request switch LH.
REQ SW -AS [On/Off]
Indicates condition of door request switch RH.
REQ SW -BD/TR [On/Off]
Indicates condition of trunk open switch.
PUSH SW [On/Off]
Indicates condition of push-button ignition switch.
DOOR SW-DR [On/Off]
Indicates condition of front door switch LH.
DOOR SW-AS [On/Off]
Indicates condition of front door switch RH.
DOOR SW-RR [On/Off]
Indicates condition of rear door switch RH.
DOOR SW-RL [On/Off]
Indicates condition of rear door switch LH.
DOOR SW-BK [On/Off]
Indicates condition of trunk switch.
CDL LOCK SW [On/Off]
Indicates condition of lock signal from door lock and unlock switch.
CDL UNLOCK SW [On/Off]
Indicates condition of unlock signal from door lock and unlock switch.
BCS-26
< SYSTEM DESCRIPTION >
[WITH INTELLIGENT KEY SYSTEM]
DIAGNOSIS SYSTEM (BCM)
ACTIVE TEST
RETAINED PWR
RETAINED PWR : CONSULT Function (BCM - RETAINED PWR)
INFOID:0000000009268629
DATA MONITOR
SIGNAL BUFFER
SIGNAL BUFFER : CONSULT Function (BCM - SIGNAL BUFFER)
INFOID:0000000009268630
DATA MONITOR
ACTIVE TEST
AIR PRESSURE MONITOR
AIR PRESSURE MONITOR : CONSULT Function (BCM - AIR PRESSURE MONI-
TOR)
INFOID:0000000009268631
NOTE:
The Signal Tech II Tool (J-50190) can be used to perform the following functions. Refer to the Signal Tech II
User Guide for additional information.
• Activate and display TPMS transmitter IDs
• Display tire pressure reported by the TPMS transmitter
• Read TPMS DTCs
• Register TPMS transmitter IDs
• Check Intelligent Key relative signal strength
KEY CYL LK-SW [On/Off]
Indicates condition of lock signal from door key cylinder switch.
KEY CYL UN-SW [On/Off]
Indicates condition of unlock signal from door key cylinder switch.
KEY CYL SW-TR [On/Off]
Indicates condition of trunk key cylinder switch.
TR/BD OPEN SW [On/Off]
Indicates condition of trunk open switch.
TRNK/HAT MNTR [On/Off]
Indicates condition of trunk room lamp switch.
RKE-LOCK [On/Off]
Indicates condition of lock signal from Intelligent Key.
RKE-UNLOCK [On/Off]
Indicates condition of unlock signal from Intelligent Key.
RKE-TR/BD [On/Off]
Indicates condition of trunk open signal from Intelligent Key.
Monitored Item
Description
Test Item
Description
VEHICLE SECURITY HORN
This test is able to check vehicle security horn operation [On].
FLASHER
This test is able to check turn signal lamp operation [LH/RH/Off].
THEFT IND
This test is able to check security indicator lamp operation [On/Off].
HEADLAMP(HI)
This test is able to check vehicle security lamp operation [On].
Monitor Item [Unit]
Description
DOOR SW-DR [On/Off]
Indicates condition of front door switch LH.
DOOR SW-AS [On/Off]
Indicates condition of front door switch RH.
Monitor Item [Unit]
Description
PUSH SW [On/Off]
Indicates condition of the push-button ignition switch.
Test Item
Description
OIL PRESS SW
This test is able to check the oil pressure gauge operation [Off/On].
BCS
DIAGNOSIS SYSTEM (BCM)
BCS-27
< SYSTEM DESCRIPTION >
[WITH INTELLIGENT KEY SYSTEM]
C
D
E
F
G
H
I
J
K
L
B
A
O
P
N
• Confirm vehicle Intelligent Key antenna signal strength
SELF DIAGNOSTIC RESULT
NOTE:
Before performing self diagnostic result, be sure to register the ID, or else the actual malfunction may be differ-
ent from that displayed on CONSULT.
DATA MONITOR
ACTIVE TEST
WORK SUPPORT
PANIC ALARM
PANIC ALARM : CONSULT Function (BCM - PANIC ALARM)
INFOID:0000000009564188
ACTIVE TEST
Monitor Item [Unit]
Description
AIR PRESS FL [kPa, kg/cm
2
or Psi]
Indicates air pressure of front LH tire.
AIR PRESS FR [kPa, kg/cm
2
or Psi]
Indicates air pressure of front RH tire.
AIR PRESS RR [kPa, kg/cm
2
or Psi]
Indicates air pressure of rear RH tire.
AIR PRESS RL [kPa, kg/cm
2
or Psi]
Indicates air pressure of rear LH tire.
ID REGST FL1 [Done/Yet]
Indicates ID registration status of front LH transmitter.
ID REGST FR1 [Done/Yet]
Indicates ID registration status of front RH transmitter.
ID REGST RR1 [Done/Yet]
Indicates ID registration status of rear RH transmitter.
ID REGST RL1 [Done/Yet]
Indicates ID registration status of rear LH transmitter.
WARNING LAMP [Off/On]
Indicates condition of low tire pressure warning lamp in combination meter.
BUZZER [Off/On]
Indicates condition of buzzer in combination meter.
Test Item
Description
HORN
This test is able to check horn operation [On].
FLASHER
This test is able to check turn signal lamp operation [Off/LH/RH].
ID REGIST WARNING
This test is able to check ID registration warning chime operation [On/Off].
WARNING LAMP
This test is able to check tire pressure warning lamp operation [On/Off].
Support Item
Description
ID READ
The registered ID number is displayed.
ID REGIST
Refer to
Test Item
Description
VEHICLE SECURITY HORN
This test is able to check panic alarm operation [On].
HEAD LAMP (HI)
This test is able to check head lamp HI operation [On].
BCS-28
< ECU DIAGNOSIS INFORMATION >
[WITH INTELLIGENT KEY SYSTEM]
BCM
ECU DIAGNOSIS INFORMATION
BCM
Reference Value
INFOID:0000000009268632
NOTE:
The Signal Tech II Tool (J-50190) can be used to perform the following functions. Refer to the Signal Tech II
User Guide for additional information.
• Activate and display TPMS transmitter IDs
• Display tire pressure reported by the TPMS transmitter
• Read TPMS DTCs
• Register TPMS transmitter IDs
• Check Intelligent Key relative signal strength
• Confirm vehicle Intelligent Key antenna signal strength
VALUES ON THE DIAGNOSIS TOOL
Monitor Item
Condition
Value/Status
AIR COND SW
A/C switch OFF
Off
A/C switch ON
On
AIR PRESS FL
Front left tire air pressure value
kPa, kg/cm
2
, psi
AIR PRESS FR
Front right tire air pressure value
kPa, kg/cm
2
, psi
AIR PRESS RL
Rear left tire air pressure value
kPa, kg/cm
2
, psi
AIR PRESS RR
Rear right tire air pressure value
kPa, kg/cm
2
, psi
BRAKE SW 1
When the brake pedal is released
On
When the brake pedal is depressed
Off
BRAKE SW2
Brake pedal released
Off
Brake pedal depressed
On
BUZZER
Buzzer in combination meter OFF
Off
Buzzer in combination meter ON
On
CDL LOCK SW
Door lock/unlock switch does not operate
Off
Press door lock/unlock switch to the LOCK side
On
CDL UNLOCK SW
Door lock/unlock switch does not operate
Off
Press door lock/unlock switch to the UNLOCK side
On
CONFRM ID ALL
The key ID does not match any key ID registered to BCM.
Yet
The key ID matches any key ID registered to BCM.
DONE
CONFIRM ID4
The key ID does not match the fourth key ID registered to BCM.
Yet
The key ID matches the fourth key ID registered to BCM.
DONE
CONFIRM ID3
The key ID does not match the third key ID registered to BCM.
Yet
The key ID matches the third key ID registered to BCM.
DONE
CONFIRM ID2
The key ID does not match the second key ID registered to BCM.
Yet
The key ID matches the second key ID registered to BCM.
DONE
CONFIRM ID1
The key ID does not match the first key ID registered to BCM.
Yet
The key ID matches the first key ID registered to BCM.
DONE
DETE SW -IPDM
When selector lever is in P position
Off
When selector lever is in any position other than P
On
DETE/CANCL SW
When selector lever is in P position
Off
When selector lever is in any position other than P
On
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст