Nissan Altima L32. Instruction — part 122
BCS-22
< FUNCTION DIAGNOSIS >
[BCM]
DIAGNOSIS SYSTEM (BCM)
ACTIVE TEST
MULTI REMOTE ENT
MULTI REMOTE ENT : CONSULT-III Function (BCM - MULTIREMOTE ENT)
INFOID:0000000004507201
DATA MONITOR
DOOR SW-DR
[ON/OFF]
The switch status input from front door switch LH
DOOR SW-AS
[ON/OFF]
The switch status input from front door switch RH
DOOR SW-RR
[ON/OFF]
The switch status input from rear door switch RH
DOOR SW-RL
[ON/OFF]
The switch status input from rear door switch LH
DOOR SW-BK
[ON/OFF]
NOTE:
The item is indicated, not monitored.
CDL LOCK SW
[ON/OFF]
Lock switch status received from central door lock switch by power window switch se-
rial link
CDL UNLOCK SW
[ON/OFF]
Unlock switch status received from central door lock switch by power window switch
serial link
KEY CYL LK-SW
[ON/OFF]
Lock switch status received from key cylinder switch by power window switch serial
link
KEY CYL UN-SW
[ON/OFF]
Unlock switch status received from key cylinder switch by power window switch serial
link
TRNK/HAT MNTR
[ON/OFF]
The switch status input from trunk room lamp switch
RKE-LOCK
[ON/OFF]
Lock signal status received from remote keyless entry receiver
RKE-UNLOCK
[ON/OFF]
Unlock signal status received from remote keyless entry receiver
Monitor item
[Unit]
Description
Test item
Operation
Description
INT LAMP
ON
Outputs the interior room lamp control signal to turn map lamp and personal lamp ON
(Map lamp switch is in DOOR position).
OFF
Stops the interior room lamp control signal to turn map lamp and personal lamp OFF.
STEP LAMP TEST
ON
Outputs the step lamp control signal to turn step lamp ON.
OFF
Stops the step lamp control signal to turn step lamp OFF.
LUGGAGE LAMP TEST
ON
Outputs the luggage room lamp control signal to turn step lamp ON.
OFF
Stops the luggage room lamp control signal to turn step lamp ON.
Monitor Item
Condition
DOOR SW-DR
Indicates [ON/OFF] condition of front door switch (driver side).
DOOR SW-AS
Indicates [ON/OFF] condition of front door switch (passenger side).
DOOR SW-RR
Indicates [ON/OFF] condition of rear door switch RH.
DOOR SW-RL
Indicates [ON/OFF] condition of rear door switch LH.
DOOR SW-BK
NOTE:
This item is displayed, but cannot be monitored.
CDL LOCK SW
Indicates [ON/OFF] condition of door lock and unlock switch.
BCS
DIAGNOSIS SYSTEM (BCM)
BCS-23
< FUNCTION DIAGNOSIS >
[BCM]
C
D
E
F
G
H
I
J
K
L
B
A
O
P
N
ACTIVE TEST
WORK SUPPORT
CDL UNLOCK SW
Indicates [ON/OFF] condition of door lock and unlock switch.
RKE-LOCK
Indicates [ON/OFF] condition of LOCK signal from keyfob.
RKE-UNLOCK
Indicates [ON/OFF] condition of UNLOCK signal from keyfob.
RKE-TR/BD
Indicates [ON/OFF] condition of TRUNK OPEN signal from keyfob.
RKE-PANIC
Indicates [ON/OFF] condition of PANIC button of keyfob.
RKE-P/W OPEN
Indicates [ON/OFF] condition of P/W DOWN signal from keyfob.
RKE-MODE CHG
Indicates [ON/OFF] condition of MODE CHANGE signal from keyfob.
KEY CYL LK-SW
Indicated [ON/OFF] condition of lock signal from door key cylinder.
KEY CYL UN-SW
Indicated [ON/OFF] condition of unlock signal from door key cylinder.
KEY CYL SW-TR
NOTE:
This item is displayed, but cannot be monitored.
Monitor Item
Condition
Test item
Description
INT LAMP
This test is able to check interior room lamp operation.
The interior room lamp will be activated after “ON” on CONSULT-III screen is touched.
LUGGAGE LAMP TEST
NOTE:
This item is displayed, but cannot be tested.
DOOR LOCK
This test is able to check door lock/unlock operation.
• The all door lock actuators are locked when “ALL LCK” on CONSULT-III screen is touched.
• The all door lock actuators are unlocked when “ALL UNLK” on CONSULT-III screen is
touched.
• The door lock actuator (driver side) is unlocked when “DR UNLK” on CONSULT-III screen
is touched.
• The door lock actuator (passenger side) is unlocked when “AS UNLK” on CONSULT- III
screen is touched.
• The door lock actuator (rear LH and RH) is unlocked when “OTR ULK” on CONSULT-III
screen is touched.
FLASHER
This test is able to check flasher operation [LH/RH/OFF].
HORN
This test is able to check horn operation [ON/OFF].
TRUNK/GLASS HATCH
This test is able to check trunk lid opener actuator open operation.
This actuator opens when “ON” on CONSULT-III screen is touched.
TRUNK/BACK DOOR
NOTE:
This item is displayed, but cannot be tested.
AUTOMATIC BACK DOOR
NOTE:
This item is displayed, but cannot be tested.
Test item
Description
DOOR LOCK-UNLOCK SET
Selective unlock function mode can be changed to operate (WITH) or not operate (WITHOUT)
with this mode.
HORN CHIRP SET
Answer back function (horn) mode can be changed in this mode.
For the detail of the setting.
HAZARD LAMP SET
Answer back function (hazard) mode can be changed in this mode.
• MODE1: Non-operation
• MODE2: Lock (non-operation) Unlock (blink once)
• MODE3: Lock (blink towice) Unlock (non-operation)
• MODE4: Lock (blink towice) Unlock (blink once)
AUTO LOCK SET
Auto door lock time can be changed in this mode.
• MODE 1: 1 minute
• MODE 2: 5 minutes
BCS-24
< FUNCTION DIAGNOSIS >
[BCM]
DIAGNOSIS SYSTEM (BCM)
HEADLAMP
HEADLAMP : CONSULT-III Function
INFOID:0000000004202242
WORK SUPPORT
1 : Initial setting
2: With auto light system
DATA MONITOR
PANIC ALARM SET
Panic alarm button pressing time on keyfob remote control button can be selected from the
following with this mode.
• MODE1: 0.5 sec.
• MODE2: 1.5 sec.
• MODE3: Non-operation
PW DOWN SET
Unlock button pressing time on keyfob button can be selected from the following with this
mode.
• MODE 1: 3 sec.
• MODE 2: Non-operation
• MODE 3: 5 se
Test item
Description
Service item
Setting item
Setting
BATTERY SAVER SET
ON
1
With the exterior lamp battery saver function
OFF
Without the exterior lamp battery saver function
ILL DELAY SET
2
MODE 1
1
45 sec.
Sets delay timer function timer operation time
(All doors closed)
MODE 2
Without the func-
tion
MODE 3
30 sec.
MODE 4
60 sec.
MODE 5
90 sec.
MODE 6
120 sec.
MODE 7
150 sec.
MODE 8
180 sec.
CUSTOM A/LIGHT
SETTING
2
MODE 1
1
Normal
MODE 2
More sensitive setting than normal setting (Turns ON earlier than normal operation.)
MODE 3
More sensitive setting than MODE 2 (Turns ON earlier than MODE 2.)
MODE 4
Less sensitive setting than normal setting (Turns ON later than normal operation.)
Monitor item
[Unit]
Description
PUSH SW
[ON/OFF]
The switch status input from push-button ignition switch
ENGINE STATE
[STOP/STALL/CRANK/RUN]
The engine status received from ECM with CAN communication
VEH SPEED 1
[km/h]
The value of the vehicle speed received from combination meter with CAN commu-
nication
KEY SW-SLOT
[ON/OFF]
Key switch status input from key slot
BCS
DIAGNOSIS SYSTEM (BCM)
BCS-25
< FUNCTION DIAGNOSIS >
[BCM]
C
D
E
F
G
H
I
J
K
L
B
A
O
P
N
1: With auto light system.
2: The item is indicated, not monitored.
ACTIVE TEST
TURN SIGNAL R
[ON/OFF]
Each switch status that BCM judges from the combination switch reading function
TURN SIGNAL L
[ON/OFF]
TAIL LAMP SW
[ON/OFF]
HI BEAM SW
[ON/OFF]
HEAD LAMP SW1
[ON/OFF]
HEAD LAMP SW2
[ON/OFF]
PASSING SW
[ON/OFF]
AUTO LIGHT SW
1
[ON/OFF]
FR FOG SW
[ON/OFF]
DOOR SW-DR
[ON/OFF]
The switch status input from front door switch LH
DOOR SW-AS
[ON/OFF]
The switch status input from front door switch RH
DOOR SW-RR
[ON/OFF]
The switch status input from rear door switch RH
DOOR SW-RL
[ON/OFF]
The switch status input from rear door switch LH
DOOR SW-BK
2
[ON/OFF]
—
OPTICAL SENSOR
[V]
1
The value of exterior brightness voltage input from the optical sensor
Monitor item
[Unit]
Description
Test item
Operation
Description
TAIL LAMP
ON
Transmits the Position light request signal to IPDM E/R with CAN com-
munication to turn the tail lamp ON.
OFF
Stops the tail lamp request signal transmission.
HEAD LAMP
HI
Transmits the high beam request signal with CAN communication to turn
the headlamp (HI)
LO
Transmits the low beam request signal with CAN communication to turn
the headlamp (LO).
OFF
Stops the high & low beam request signal transmission.
FR FOG LAMP
ON
Transmits the front fog lights request signal to IPDM E/R with CAN com-
munication to turn the front fog lamp ON.
OFF
Stops the front fog lights request signal transmission.
DAYTIME RUNNING LIGHT*
ON
—
OFF
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст