Nissan Altima L32. Instruction — part 1532
VTL-20
< ON-VEHICLE REPAIR >
EVAPORATOR
EVAPORATOR
Removal and Installation
INFOID:0000000004205425
COMPONENTS
Heater and Cooling Unit
REMOVAL
1. Remove the heater and cooling unit assembly. Refer to
HA-32, "HFC-134a (R-134a) Service Procedure"
2. Remove the expansion valve.
CAUTION:
Cap or wrap the joint of the pipe with suitable material such as vinyl tape to avoid the entry of air.
3. Remove the blower unit. Refer to
VTL-14, "Removal and Installation"
4. Remove the heater and cooling unit foot duct RH.
5. Remove the air mix door motor RH.
6. Remove the evaporator cover.
7. Remove the evaporator.
• Remove the intake sensor.
CAUTION:
Mark the mounting position of the intake sensor.
ALIIA0021ZZ
1.
Heater and cooling unit case
2.
Evaporator
3.
Intake sensor
4.
In-cabin microfilter
5.
Evaporator cover
6.
Heater and cooling unit foot duct RH
7.
Blower unit
⇐
Front
WJIA0190E
EVAPORATOR
VTL-21
< ON-VEHICLE REPAIR >
C
D
E
F
G
H
J
K
L
M
A
B
VTL
N
O
P
INSTALLATION
Installation is in the reverse order of removal.
CAUTION:
• Replace the O-rings with new ones, then apply compressor oil to them when installing them.
Expansion valve mounting bolts
: 2.9 - 5.0 N·m (0.29 - 0.51 kg-m, 26 - 44 in-lb)
VTL-22
< ON-VEHICLE REPAIR >
HEATER CORE
HEATER CORE
Removal and Installation
INFOID:0000000004205426
COMPONENTS
REMOVAL
1. Remove the heater and cooling unit assembly. Refer to
VTL-12, "Removal and Installation"
.
2. Remove the heater grommet, heater pipe support and heater pipe cover.
3. Remove the heater and cooling unit foot duct LH.
4. Remove the heater core.
INSTALLATION
Installation is in the reverse order of removal.
• Make sure that the aspirator hose is securely attached to the aspirator on the heater and cooling unit foot
duct LH.
1.
Heater grommet
2.
Heater pipe support
3.
Heater and cooling unit foot duct LH
4.
Heater core
5.
Heater and cooling unit case
⇐
Front
ALIIA0022ZZ
DUCTS AND GRILLES
VTL-23
< ON-VEHICLE REPAIR >
C
D
E
F
G
H
J
K
L
M
A
B
VTL
N
O
P
DUCTS AND GRILLES
DUCTS, NOZZLES AND GRILLES
DUCTS, NOZZLES AND GRILLES : Components
INFOID:0000000004205427
Ducts
ALIIA0023ZZ
1.
Upper ventilator duct
2.
Heater and cooling unit assembly
3.
Connector duct (LH)
4.
Floor ventilator duct (LH)
5.
Connector duct (center)
6.
Rear floor duct (LH)
7.
Rear ventilator duct (center)
8.
Rear floor duct (RH)
9.
Floor ventilator duct (RH)
10. Connector duct (RH)
11. Rear console duct
⇐
Front
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст