Nissan Altima L32. Instruction — part 866
INSTRUMENT PANEL ASSEMBLY
IP-11
< ON-VEHICLE REPAIR >
C
D
E
F
G
H
I
K
L
M
A
B
IP
N
O
P
ON-VEHICLE REPAIR
INSTRUMENT PANEL ASSEMBLY
Exploded View
INFOID:0000000004205588
ALJIA0016ZZ
IP-12
< ON-VEHICLE REPAIR >
INSTRUMENT PANEL ASSEMBLY
Removal and Installation
INFOID:0000000004205589
CAUTION:
• Disconnect both battery terminals.
• Never tamper with or force air bag lid open, as this may adversely affect air bag performance.
• Be careful not to scratch instrument panel pad and other parts.
REMOVAL
1. Disconnect both battery terminals.
2. Remove the A-pillar finishers. Refer to
INT-15, "Removal and Installation"
.
3. Put selector lever in the drive (D) position, then remove selector lever knob (CVT Models only). Refer to
TM-255, "Removal and Installation"
4. Put the shift lever in neutral, then remove shift lever knob. (M/T Models only) Refer to
5. Remove the cluster lid D (1).
6. Remove console finisher. Refer to
TM-255, "Removal and Installation"
7. Remove the storage bin (1) or CD changer finisher (if equipped).
1.
Center speaker grille
2.
Tweeter speaker grille (LH)
3.
Instrument panel
4.
Instrument side mask (LH)
5.
Combination meter
6.
Lower knee protector (LH)
7.
Cluster lid A
8.
Instrument lower cover (LH)
9.
Fuse block cover
10. Steering column cover upper
11. Steering column cover lower
12. Console side finisher (LH)
13. CD changer finisher (if equipped)
14. Storage bin (if equipped)
15. Cup holder M/T
16. Cup holder CVT
17. Console screw cover (LH)
18. Console rear finisher (if equipped
with rear duct)
19. Console rear finisher (without rear
duct)
20. Console screw cover (RH)
21. CVT finisher
22. Console
23. M/T finisher
24. Console side finisher (RH)
25. Cluster lid D
26. Cluster lid C
27. Center ventilator grilles
28. Glove box assembly
29. Instrument side mask (RH)
30. Tweeter speaker grille (RH)
Clip
Metal clip
Pawl
ALJIA0036ZZ
ALJIA0017ZZ
INSTRUMENT PANEL ASSEMBLY
IP-13
< ON-VEHICLE REPAIR >
C
D
E
F
G
H
I
K
L
M
A
B
IP
N
O
P
8. Remove both instrument side masks (1).
9. Open the fuse block cover, remove the instrument lower cover
screw (A), then remove the instrument lower cover (1).
• Disconnect the harness connectors.
• Disconnect the aspirator tube.
10. Remove both the console side finishers.
11. Remove the console upper screws (A).
12. Remove the console side screws (A).
ALJIA0018ZZ
ALJIA0019ZZ
ALJIA0022ZZ
ALJIA0023ZZ
IP-14
< ON-VEHICLE REPAIR >
INSTRUMENT PANEL ASSEMBLY
13. Remove both the console rear screw covers, then remove the
rear screws (A), then remove the console assembly.
14. Open the glove box door (1), remove the glove box assembly
screws (A).
15. Remove the glove box assembly lower screws (A), then remove
the glove box assembly.
16. Remove the steering wheel. Refer to
ST-13, "Removal and Installation"
17. Remove the steering column screws (A), then remove both the
steering wheel column upper (1) and lower (2) covers.
ALJIA0024ZZ
ALJIA0020ZZ
ALJIA0021ZZ
ALJIA0025ZZ
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст